summaryrefslogtreecommitdiff
path: root/libpod/define
Commit message (Collapse)AuthorAge
* rename oneshot initcontainers to onceBrent Baude2021-08-12
| | | | | | | | | | after the init containers pr merged, it was suggested to use `once` instead of `oneshot` containers as it is more aligned with other terminiology used similarily. [NO TESTS NEEDED] Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* implement init containers in podmanBrent Baude2021-08-04
| | | | | | | | | | | | | | this is the first pass at implementing init containers for podman pods. init containersare made popular by k8s as a way to run setup for pods before the pods standard containers run. unlike k8s, we support two styles of init containers: always and oneshot. always means the container stays in the pod and starts whenever a pod is started. this does not apply to pods restarting. oneshot means the container runs onetime when the pod starts and then is removed. Signed-off-by: Brent Baude <bbaude@redhat.com>
* podman pod create --pid flagcdoern2021-07-15
| | | | | | | | added support for --pid flag. User can specify ns:file, pod, private, or host. container returns an error since you cannot point the ns of the pods infra container to a container outside of the pod. Signed-off-by: cdoern <cdoern@redhat.com>
* podman diff accept two images or containersPaul Holzinger2021-07-02
| | | | | | | | | | | | | | | | | | | First, make podman diff accept optionally a second argument. This allows the user to specify a second image/container to compare the first with. If it is not set the parent layer will be used as before. Second, podman container diff should only use containers and podman image diff should only use images. Previously, podman container diff would use the image when both an image and container with this name exists. To make this work two new parameters have been added to the api. If they are not used the previous behaviour is used. The same applies to the bindings. Fixes #10649 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #10716 from cdoern/podFlagsOpenShift Merge Robot2021-06-23
|\ | | | | Podman Pod Create --cpus and --cpuset-cpus flags
| * Podman Pod Create --cpus and --cpuset-cpus flagscdoern2021-06-23
| | | | | | | | | | | | | | | | | | | | | | | | Added logic and handling for two new Podman pod create Flags. --cpus specifies the total number of cores on which the pod can execute, this is a combination of the period and quota for the CPU. --cpuset-cpus is a string value which determines of these available cores, how many we will truly execute on. Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* | Podman Stats additional featurescdoern2021-06-23
|/ | | | | | | | added Avg Cpu calculation and CPU up time to podman stats. Adding different feature sets in different PRs, CPU first. resolves #9258 Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* Merge pull request #10436 from rhatdan/errorsOpenShift Merge Robot2021-05-24
|\ | | | | Improve OCI Runtime error
| * Improve OCI Runtime errorDaniel J Walsh2021-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | ErrOCIRuntimeNotFound error is misleading. Try to make it more understandable to the user that the OCI Runtime IE crun or runc is not missing, but the command they attempted to run within the container is missing. [NO TESTS NEEDED] Regular tests should handle this. Fixes: https://github.com/containers/podman/issues/10432 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Podman info add support for status of cgroup controllersflouthoc2021-05-24
|/ | | | Signed-off-by: flouthoc <flouthoc.git@gmail.com>
* Merge pull request #10366 from ashley-cui/secretoptionsOpenShift Merge Robot2021-05-17
|\ | | | | Support uid,gid,mode options for secrets
| * Support uid,gid,mode options for secretsAshley Cui2021-05-17
| | | | | | | | | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | podman network reload add rootless supportPaul Holzinger2021-05-17
|/ | | | | | | | | | Allow podman network reload to be run as rootless user. While it is unlikely that the iptable rules are flushed inside the rootless cni namespace, it could still happen. Also fix podman network reload --all to ignore errors when a container does not have the bridge network mode, e.g. slirp4netns. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add host.serviceIsRemote to podman info resultsJhon Honce2021-05-10
| | | | | | | | | | | | | | | | Developers asked for a deterministic field to verify if podman is running via API or linked directly to libpod library. $ podman info --format '{{.Host.ServiceIsRemote}}' false $ podman-remote info --format '{{.Host.ServiceIsRemote}}' true $ podman --remote info --format '{{.Host.ServiceIsRemote}}' true * docs/conf.py formatted via black Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add restart-policy to container filters & --filter to podman startBoaz Shuster2021-05-06
| | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* codespell cleanupDaniel J Walsh2021-05-05
| | | | | | [NO TESTS NEEDED] This is just running codespell on podman Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Use seccomp_profile as default profile if defined in containers.confPablo Correa Gómez2021-04-28
| | | | | | | Edits `podman info` to provide the default seccomp profile detected in the output Signed-off-by: Pablo Correa Gómez <ablocorrea@hotmail.com>
* Add podman run --timeout optionDaniel J Walsh2021-04-23
| | | | | | | | | This option allows users to specify the maximum amount of time to run before conmon sends the kill signal to the container. Fixes: https://github.com/containers/podman/issues/6412 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fixes from make codespellDaniel J Walsh2021-04-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #8979 from haircommander/full-attach-pathOpenShift Merge Robot2021-04-21
|\ | | | | Use full attach path, rather than a symlink
| * runtime: return findConmon to libpodPeter Hunt2021-04-16
| | | | | | | | | | | | | | | | I believe moving the conmon probing code to c/common wasn't the best strategy. Different container engines have different requrements of which conmon version is required (based on what flags they use). Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | fix start itchenkang2021-04-17
| | | | | | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* | add pidfile in inspectionchenkang2021-04-17
|/ | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* Add --requires flag to podman run/createMatthew Heon2021-04-06
| | | | | | | | | | | | | | | | | | | | Podman has, for a long time, had an internal concept of dependency management, used mainly to ensure that pod infra containers are started before any other container in the pod. We also have the ability to recursively start these dependencies, which we use to ensure that `podman start` on a container in a pod will not fail because the infra container is stopped. We have not, however, exposed these via the command line until now. Add a `--requires` flag to `podman run` and `podman create` to allow users to manually specify dependency containers. These containers must be running before the container will start. Also, make recursive starting with `podman start` default so we can start these containers and their dependencies easily. Fixes #9250 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Do not leak libpod package into the remote clientPaul Holzinger2021-03-15
| | | | | | | | | | | | | | | | | | Some packages used by the remote client imported the libpod package. This is not wanted because it adds unnecessary bloat to the client and also causes problems with platform specific code(linux only), see #9710. The solution is to move the used functions/variables into extra packages which do not import libpod. This change shrinks the remote client size more than 6MB compared to the current master. [NO TESTS NEEDED] I have no idea how to test this properly but with #9710 the cross compile should fail. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* separate file with mount consts in libpod/defineJakub Guzik2021-03-07
| | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Merge pull request #9593 from vrothberg/cp-tmpOpenShift Merge Robot2021-03-05
|\ | | | | podman cp: support copying on tmpfs mounts
| * podman cp: support copying on tmpfs mountsValentin Rothberg2021-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Traditionally, the path resolution for containers has been resolved on the *host*; relative to the container's mount point or relative to specified bind mounts or volumes. While this works nicely for non-running containers, it poses a problem for running ones. In that case, certain kinds of mounts (e.g., tmpfs) will not resolve correctly. A tmpfs is held in memory and hence cannot be resolved relatively to the container's mount point. A copy operation will succeed but the data will not show up inside the container. To support these kinds of mounts, we need to join the *running* container's mount namespace (and PID namespace) when copying. Note that this change implies moving the copy and stat logic into `libpod` since we need to keep the container locked to avoid race conditions. The immediate benefit is that all logic is now inside `libpod`; the code isn't scattered anymore. Further note that Docker does not support copying to tmpfs mounts. Tests have been extended to cover *both* path resolutions for running and created containers. New tests have been added to exercise the tmpfs-mount case. For the record: Some tests could be improved by using `start -a` instead of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI which forced me to use the more expensive start-exec option. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Use version package to track all versionsJhon Honce2021-03-03
|/ | | | | | | | | | | | * Server, bindings, and CLI all now pull version information from version package. * Current /libpod API version slaved to podman/libpod Version * Bindings validate against libpod API Minimal version * Remove pkg/bindings/bindings.go and updated tests Fixes: #9207 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* prune remotecommand dependencybaude2021-02-25
| | | | | | | | | | | prune a dependency that was only being used for a simple struct. Should correct checksum issue on tarballs [NO TESTS NEEDED] Fixes: #9355 Signed-off-by: baude <bbaude@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Display correct value for unlimited ulimitbaude2021-02-10
| | | | | | | | | | | When doing a container inspect on a container with unlimited ulimits, the value should be -1. But because the OCI spec requires the ulimit value to be uint64, we were displaying the inspect values as a uint64 as well. Simple change to display as an int64. Fixes: #9303 Signed-off-by: baude <bbaude@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* Fix per review requestMatej Vasek2021-02-04
| | | | Signed-off-by: Matej Vasek <mvasek@redhat.com>
* Initial implementation of volume pluginsMatthew Heon2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements support for mounting and unmounting volumes backed by volume plugins. Support for actually retrieving plugins requires a pull request to land in containers.conf and then that to be vendored, and as such is not yet ready. Given this, this code is only compile tested. However, the code for everything past retrieving the plugin has been written - there is support for creating, removing, mounting, and unmounting volumes, which should allow full functionality once the c/common PR is merged. A major change is the signature of the MountPoint function for volumes, which now, by necessity, returns an error. Named volumes managed by a plugin do not have a mountpoint we control; instead, it is managed entirely by the plugin. As such, we need to cache the path in the DB, and calls to retrieve it now need to access the DB (and may fail as such). Notably absent is support for SELinux relabelling and chowning these volumes. Given that we don't manage the mountpoint for these volumes, I am extremely reluctant to try and modify it - we could easily break the plugin trying to chown or relabel it. Also, we had no less than *5* separate implementations of inspecting a volume floating around in pkg/infra/abi and pkg/api/handlers/libpod. And none of them used volume.Inspect(), the only correct way of inspecting volumes. Remove them all and consolidate to using the correct way. Compat API is likely still doing things the wrong way, but that is an issue for another day. Fixes #4304 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #8906 from vrothberg/fix-8501OpenShift Merge Robot2021-01-14
|\ | | | | container stop: release lock before calling the runtime
| * container stop: release lock before calling the runtimeValentin Rothberg2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman defers stopping the container to the runtime, which can take some time. Keeping the lock while waiting for the runtime to complete the stop procedure, prevents other commands from acquiring the lock as shown in #8501. To improve the user experience, release the lock before invoking the runtime, and re-acquire the lock when the runtime is finished. Also introduce an intermediate "stopping" to properly distinguish from "stopped" containers etc. Fixes: #8501 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #8950 from mheon/exorcise_driverOpenShift Merge Robot2021-01-12
|\ \ | | | | | | Exorcise Driver code from libpod/define
| * | Exorcise Driver code from libpod/defineMatthew Heon2021-01-12
| |/ | | | | | | | | | | | | | | | | | | | | | | The libpod/define code should not import any large dependencies, as it is intended to be structures and definitions only. It included the libpod/driver package for information on the storage driver, though, which brought in all of c/storage. Split the driver package so that define has the struct, and thus does not need to import Driver. And simplify the driver code while we're at it. Signed-off-by: Matthew Heon <mheon@redhat.com>
* / Expose security attribute errors with their own messagesJuan Antonio Osorio Robles2021-01-12
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This creates error objects for runtime errors that might come from the runtime. Thus, indicating to users that the place to debug should be in the security attributes of the container. When creating a container with a SELinux label that doesn't exist, we get a fairly cryptic error message: ``` $ podman run --security-opt label=type:my_container.process -it fedora bash Error: OCI runtime error: write file `/proc/thread-self/attr/exec`: Invalid argument ``` This instead handles any errors coming from LSM's `/proc` API and enhances the error message with a relevant indicator that it's related to the container's security attributes. A sample run looks as follows: ``` $ bin/podman run --security-opt label=type:my_container.process -it fedora bash Error: `/proc/thread-self/attr/exec`: OCI runtime error: unable to assign security attribute ``` With `debug` log level enabled it would be: ``` Error: write file `/proc/thread-self/attr/exec`: Invalid argument: OCI runtime error: unable to assign security attribute ``` Note that these errors wrap ErrOCIRuntime, so it's still possible to to compare these errors with `errors.Is/errors.As`. One advantage of this approach is that we could start handling these errors in a more efficient manner in the future. e.g. If a SELinux label doesn't exist (yet), we could retry until it becomes available. Signed-off-by: Juan Antonio Osorio Robles <jaosorior@redhat.com>
* SpellingJosh Soref2020-12-22
| | | | Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
* Add Security information to podman infoDaniel J Walsh2020-12-22
| | | | | | | | When debugging issues, it would be helpful to know the security settings of the system running into the problem. Adding security info to `podman info` is also useful to users. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add LogSize to container inspectDaniel J Walsh2020-12-15
| | | | | | | Other log options are available so we need to add ability to look up LogSize. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* add network connect|disconnect compat endpointsbaude2020-11-19
| | | | | | | | | | | this enables the ability to connect and disconnect a container from a given network. it is only for the compatibility layer. some code had to be refactored to avoid circular imports. additionally, tests are being deferred temporarily due to some incompatibility/bug in either docker-py or our stack. Signed-off-by: baude <bbaude@redhat.com>
* Fix podman pod inspect show wrong MAC stringzhangguanzhang2020-11-18
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* Add support for network connect / disconnect to DBMatthew Heon2020-11-11
| | | | | | | | | | | | | | | | | | | | | | | | Convert the existing network aliases set/remove code to network connect and disconnect. We can no longer modify aliases for an existing network, but we can add and remove entire networks. As part of this, we need to add a new function to retrieve current aliases the container is connected to (we had a table for this as of the first aliases PR, but it was not externally exposed). At the same time, remove all deconflicting logic for aliases. Docker does absolutely no checks of this nature, and allows two containers to have the same aliases, aliases that conflict with container names, etc - it's just left to DNS to return all the IP addresses, and presumably we round-robin from there? Most tests for the existing code had to be removed because of this. Convert all uses of the old container config.Networks field, which previously included all networks in the container, to use the new DB table. This ensures we actually get an up-to-date list of in-use networks. Also, add network aliases to the output of `podman inspect`. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #8156 from mheon/add_net_aliases_dbOpenShift Merge Robot2020-11-04
|\ | | | | Add network aliases for containers to DB
| * Add network aliases for containers to DBMatthew Heon2020-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the database backend for network aliases. Aliases are additional names for a container that are used with the CNI dnsname plugin - the container will be accessible by these names in addition to its name. Aliases are allowed to change over time as the container connects to and disconnects from networks. Aliases are implemented as another bucket in the database to register all aliases, plus two buckets for each container (one to hold connected CNI networks, a second to hold its aliases). The aliases are only unique per-network, to the global and per-container aliases buckets have a sub-bucket for each CNI network that has aliases, and the aliases are stored within that sub-bucket. Aliases are formatted as alias (key) to container ID (value) in both cases. Three DB functions are defined for aliases: retrieving current aliases for a given network, setting aliases for a given network, and removing all aliases for a given network. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-01 18:25:04 +0000