summaryrefslogtreecommitdiff
path: root/libpod/image
Commit message (Collapse)AuthorAge
* Use the result of reference.Parse when checking for digests.Miloslav Trmač2018-07-23
| | | | | | | | | | | | No need to do a separate string search when reference.Parse has already determined this. Changes behavior: non-SHA256 digest formats are now recognized as well. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Make refNamesFromPossiblyUnqualifiedName independent from ImageMiloslav Trmač2018-07-23
| | | | | | | | | | | ... which finally makes it very easy to add comprehensive tests; so do that. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Make Image.HasShaInInputName to an independent local functionMiloslav Trmač2018-07-23
| | | | | | | | | | | | The functionality only depends on Image.InputName, and we will want to make the only user of this independent of the fairly complex Image type. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Split createNamesToPull into ref{Names,Pairs}FromPossiblyUnqualifiedNameMiloslav Trmač2018-07-23
| | | | | | | | | | | | | | One part creates []*pullRefName; the other just trivially converts it into []*pullRefPair. Also use much more explicit names to explain the functionality. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Rename local variables in Runtime.pullRefPairsFromRefNamesMiloslav Trmač2018-07-23
| | | | | | | | | | | ... to be more conventional. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Split Runtime.pullRefPairsFromRefNames from Image.createNamesToPullMiloslav Trmač2018-07-23
| | | | | | | | | | | This will have another user shortly. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Rename nameToPull to pullRefNameMiloslav Trmač2018-07-23
| | | | | | | | | | | | We will use it not only in createNamesToPull, but also in getPullListFromRef soon. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Rename pullStruct to pullRefPairMiloslav Trmač2018-07-23
| | | | | | | | | | | | "Struct" is meaningless, and we will need the "reference pair" mentioned to distinguish srcRef+dstRef from srcRef+dstName. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Replace optional nameToPull.shaPullName with mandatory dstNameMiloslav Trmač2018-07-23
| | | | | | | | | | | | | This consolidates the shaPullName logic into a single place, (and eliminates the unclear shaPullName member name completely). The resulting nameToPull will shortly be more generally useful. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Introduce nameToPull, move shaPullName in thereMiloslav Trmač2018-07-23
| | | | | | | | | | | | | | | | | shaPullName is only used internally in createNamesToPull; so, introduce a nameToPull as a variant of pullStruct which has shaPullName (and does not have destRef). Eventually, we want to split pullStruct preparation into easily-testable store-independent name preparation, and a store-dependent and difficult-to-test but trivial conversion using StorageTransport.ParseStoreReference. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Split normalizeTag from Image.TagImageMiloslav Trmač2018-07-23
| | | | | | | | | | | ... so that it can be tested without side effects, and add the tests. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Remove Image.isShortNameMiloslav Trmač2018-07-23
| | | | | | | | | | | | It has no users, and it depends on the incorrect imageParts.hasRegistry. So, just drop it instead of worrying whether it is OK to change its semantics. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Inline getTags into its only userMiloslav Trmač2018-07-23
| | | | | | | | | | | | This also eliminates a duplicate call to reference.Parse() and removes an impossible erorr path. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Add unit tests for imagePartsMiloslav Trmač2018-07-23
| | | | | | | Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1112 Approved by: rhatdan
* Merge pull request #1103 from haircommander/load_dockerlessMatthew Heon2018-07-20
|\ | | | | Podman load/tag/save prepends localhost when no registry is present
| * Podman load/tag/save prepend localhost when no repository is presenthaircommander2018-07-20
| | | | | | | | | | | | Instead of having docker.io/library as its repository. Test included. Signed-off-by: haircommander <pehunt@redhat.com>
* | pull: get registries using the registries pkgGiuseppe Scrivano2018-07-20
|/ | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* fix pull image that includes a shabaude2018-07-13
| | | | | | | | | | | | | | | | when pulling an image that includes a sha such as: centos/nginx-112-centos7@sha256:42330f7f29ba1ad67819f4ff3ae2472f62de13a827a74736a5098728462212e7 the final image name in libpod should not contain portions of the sha itself nor the sha identifier. and like docker, we provide a 'none' tag as well. this should fix #877 Signed-off-by: baude <bbaude@redhat.com> Closes: #1085 Approved by: mheon
* podman rmi should only untag image if parent of anotherumohnani82018-07-12
| | | | | | | | | | | | podman rmi was deleting an image even if it was a parent of another image. This fix just untags the image instead. This also fixes podman rmi to remove intermediate images of an image when the image is removed. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #1055 Approved by: mheon
* remove buildah requirement for the libpod image librarybaude2018-07-06
| | | | | | | | | | | if we snip the requirement to use a buildah const in the libpod image library, we can save something on the order of 85 vendored files in consumers of the the library. Signed-off-by: baude <bbaude@redhat.com> Closes: #1054 Approved by: mheon
* add image user to inspect databaude2018-07-02
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #1036 Approved by: rhatdan
* Podman history now prints out intermediate image IDsumohnani82018-06-22
| | | | | | | | | | If the intermediate image exists in the store, podman history will show the IDs of the intermediate image of each layer. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #982 Approved by: mheon
* fix panic with podman pullbaude2018-05-31
| | | | | | | | | | when there are no registries configured for the system and the user provided a short image name, we panic'd due a logic bug in recent image pull changes. Signed-off-by: baude <bbaude@redhat.com> Closes: #841 Approved by: rhatdan
* save and load should support multi-tag for docker-archiveumohnani82018-05-25
| | | | | | | | | | | | The docker-archive tar files can have multiple tags for the same image stored in it. Load pulls all the tags found in the archive when loading a tar file. Save can oush multiple tags of the same image to a tar archive. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #819 Approved by: rhatdan
* Spell check strings and commentsJhon Honce2018-05-25
| | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com> Closes: #831 Approved by: rhatdan
* Allow push/save without image referenceumohnani82018-05-16
| | | | | | | | | | | | If the user uses the image ID when saving to either docker-archive or oci-archive, then do not save a reference in the manifest/index.json. If the user chooses to push without an image reference, i.e <transport>:<path> it should be valid and succeed. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #782 Approved by: rhatdan
* podman push should honor registries.confbaude2018-05-10
| | | | | | | | | | | Like podman pull, when you push an image, podman should check if the registry is listed as insecure and if so, it should --tls-verify=false unless the user overrides this. Signed-off-by: baude <bbaude@redhat.com> Closes: #738 Approved by: mheon
* Fix pulling from secure registrybaude2018-05-04
| | | | | | | | | | when pulling from a secure registry that is documented in registries.conf, we should be able to pull without tls-verify=false Signed-off-by: baude <bbaude@redhat.com> Closes: #718 Approved by: rhatdan
* Use buildah commit and bud in podmanbaude2018-04-27
| | | | | | | | | | | Vendor in buildah and use as much of commit and bug as possible for podman build and commit. Resolves #586 Signed-off-by: baude <bbaude@redhat.com> Closes: #681 Approved by: mheon
* varlink imagesbaude2018-04-26
| | | | | | | | | | | | | implement varlink image functions for working with libpod with the exception of a couple due to incompletions on the libpod side of things (build). also, created a first pass at a libpodpy package which will stand as a client to working with libpod's varlink methods using python. Signed-off-by: baude <bbaude@redhat.com> Closes: #669 Approved by: baude
* Strip transport from image name when looking for local imagebaude2018-04-26
| | | | | | | | | | | When a user pulls an image using a transport, like docker-daemon, we try to lookup the new image in storage by the input name after the pull. Because the input name has a transport (different than local storage), that lookup would fail. Signed-off-by: baude <bbaude@redhat.com> Closes: #644 Approved by: rhatdan
* Remove more Errorf in favor of WrapfMatthew Heon2018-04-25
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #668 Approved by: rhatdan
* Do not eat error messages from pullImageMatthew Heon2018-04-25
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #668 Approved by: rhatdan
* Vendor in latest containers/image and contaners/storageumohnani82018-04-19
| | | | | | | | | Made necessary changes to functions to include contex.Context wherever needed Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #640 Approved by: baude
* regression: tls verify should be set on registries.conf if insecurebaude2018-04-18
| | | | | | | | | | | In the case where podman needs to pull an image, if that registry that the image resides on is known to be insesure (as defined in /etc/containers/registries.conf), tls-verify should be altered on the fly. Signed-off-by: baude <bbaude@redhat.com> Closes: #626 Approved by: mheon
* podman pull should always try to pullbaude2018-04-14
| | | | | | | | | | | | | | In the case where you have an image local, if the the user runs podman pull, we should always attempt to pull an updated image. Added a forceRemote bool to New (image) so we can differentiate between "pull" or run because the actions differ. Run does not need to pull the latest -- only run. Signed-off-by: baude <bbaude@redhat.com> Closes: #618 Approved by: baude
* Use buildah commit for podman commitbaude2018-04-10
| | | | | | | | Resolves: #586 and #520 Signed-off-by: baude <bbaude@redhat.com> Closes: #592 Approved by: mheon
* Allow sha256: prefix for inputbaude2018-03-29
| | | | | | | | | | | | We should allow users to pass in image ids with the sha256: prefix for local images. Resolves: #493 Signed-off-by: baude <bbaude@redhat.com> Closes: #560 Approved by: baude
* Fix some minor issues lint has been picking upMatthew Heon2018-03-27
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #556 Approved by: baude
* cmd/podman/run.go: Error nicely when no image foundbaude2018-03-27
| | | | | | | | | | | | When no image is found, display a useful error message. Also, in imageToRef protect against a nil image being passed. Resolves: #553 Signed-off-by: baude <bbaude@redhat.com> Closes: #555 Approved by: mheon
* First tag, untag THEN reload the imagebaude2018-03-26
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #543 Approved by: mheon
* Stage 4 Image cleanupbaude2018-03-23
| | | | | | | | | | Cull funcs from runtime_img.go which are no longer needed. Also, fix any remaining spots that use the old image technique. Signed-off-by: baude <bbaude@redhat.com> Closes: #532 Approved by: mheon
* Removing tagged images change in behaviorbaude2018-03-22
| | | | | | | | | | | | | | | An image name is really just a tag. When an image has multiple tags, we should be able to "delete" the one of its tags without harm. In this case, the "delete' is really a form of Untag (removing the tag from the image). If an image has multiple tags and the user tries to delete by ID without force, this should be denied because when you delete by ID there is no distinguishing it like image tags. Signed-off-by: baude <bbaude@redhat.com> Closes: #528 Approved by: mheon
* Migrate podman inspect and tag to image librarybaude2018-03-21
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #525 Approved by: baude
* Migrate podman images to image librarybaude2018-03-21
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #523 Approved by: mheon
* Image library stage 4 - create and commitbaude2018-03-20
| | | | | | | | | | Migrate the podman create and commit subcommandis to leverage the images library. I also had to migrate the cmd/ portions of run and rmi. Signed-off-by: baude <bbaude@redhat.com> Closes: #498 Approved by: mheon
* Stage3 Image Librarybaude2018-03-14
| | | | | | | | | | | | | This represents the stage3 implementation for the image library. At this point, we are moving the image-centric functions to pkg/image including migration of args and object-oriented references. This is a not a one-for-one migration of funcs and some funcs will need to continue to reside in runtime_img as they are overly specific to libpod and probably not useful to others. Signed-off-by: baude <bbaude@redhat.com> Closes: #484 Approved by: baude
* Image Resolution Stage 1baude2018-03-08
This is the stage 1 effort for an image library that can be eventually used by buildah and podman alike. In eventuality, the main goal of the library (package) is to: * provide a consistent approach to resolving image names in various forms (from users). * based on the result of the above, provide image methods that in a singular spot but separate from the runtime. * reduce the cruft and bloat in the current podman runtime. The goal of stage 1 is to demonstrate fast, accurate image resolution for both local and remote images resulting in an image object as part of the return. Signed-off-by: baude <bbaude@redhat.com> Closes: #463 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 18:59:27 +0000