summaryrefslogtreecommitdiff
path: root/libpod/in_memory_state.go
Commit message (Collapse)AuthorAge
* Add support for network connect / disconnect to DBMatthew Heon2020-11-11
| | | | | | | | | | | | | | | | | | | | | | | | Convert the existing network aliases set/remove code to network connect and disconnect. We can no longer modify aliases for an existing network, but we can add and remove entire networks. As part of this, we need to add a new function to retrieve current aliases the container is connected to (we had a table for this as of the first aliases PR, but it was not externally exposed). At the same time, remove all deconflicting logic for aliases. Docker does absolutely no checks of this nature, and allows two containers to have the same aliases, aliases that conflict with container names, etc - it's just left to DNS to return all the IP addresses, and presumably we round-robin from there? Most tests for the existing code had to be removed because of this. Convert all uses of the old container config.Networks field, which previously included all networks in the container, to use the new DB table. This ensures we actually get an up-to-date list of in-use networks. Also, add network aliases to the output of `podman inspect`. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add tests for network aliasesMatthew Heon2020-11-03
| | | | | | | | | | | | As part of this, we need two new functions, for retrieving all aliases for a network and removing all aliases for a network, both required to test. Also, rework handling for some things the tests discovered were broken (notably conflicts between container name and existing aliases). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add a way to retrieve all network aliases for a ctrMatthew Heon2020-10-27
| | | | | | | | | The original interface only allowed retrieving aliases for a specific network, not for all networks. This will allow aliases to be retrieved for every network the container is present in, in a single DB operation. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add network aliases for containers to DBMatthew Heon2020-10-27
| | | | | | | | | | | | | | | | | | | | | | | This adds the database backend for network aliases. Aliases are additional names for a container that are used with the CNI dnsname plugin - the container will be accessible by these names in addition to its name. Aliases are allowed to change over time as the container connects to and disconnects from networks. Aliases are implemented as another bucket in the database to register all aliases, plus two buckets for each container (one to hold connected CNI networks, a second to hold its aliases). The aliases are only unique per-network, to the global and per-container aliases buckets have a sub-bucket for each CNI network that has aliases, and the aliases are stored within that sub-bucket. Aliases are formatted as alias (key) to container ID (value) in both cases. Three DB functions are defined for aliases: retrieving current aliases for a given network, setting aliases for a given network, and removing all aliases for a given network. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Unconditionally retrieve pod names via APIMatthew Heon2020-08-10
| | | | | | | | | | | | | | | | | | The ListContainers API previously had a Pod parameter, which determined if pod name was returned (but, notably, not Pod ID, which was returned unconditionally). This was fairly confusing, so we decided to deprecate/remove the parameter and return it unconditionally. To do this without serious performance implications, we need to avoid expensive JSON decodes of pod configuration in the DB. The way our Bolt tables are structured, retrieving name given ID is actually quite cheap, but we did not expose this via the Libpod API. Add a new GetName API to do this. Fixes #7214 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add support for containers.confDaniel J Walsh2020-03-27
| | | | | | | vendor in c/common config pkg for containers.conf Signed-off-by: Qi Wang qiwan@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add structure for new exec session tracking to DBMatthew Heon2020-03-18
| | | | | | | | | | | | | | | | | | | | | | | As part of the rework of exec sessions, we need to address them independently of containers. In the new API, we need to be able to fetch them by their ID, regardless of what container they are associated with. Unfortunately, our existing exec sessions are tied to individual containers; there's no way to tell what container a session belongs to and retrieve it without getting every exec session for every container. This adds a pointer to the container an exec session is associated with to the database. The sessions themselves are still stored in the container. Exec-related APIs have been restructured to work with the new database representation. The originally monolithic API has been split into a number of smaller calls to allow more fine-grained control of lifecycle. Support for legacy exec sessions has been retained, but in a deprecated fashion; we should remove this in a few releases. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* add libpod/configValentin Rothberg2019-10-31
| | | | | | | | | | | | Refactor the `RuntimeConfig` along with related code from libpod into libpod/config. Note that this is a first step of consolidating code into more coherent packages to make the code more maintainable and less prone to regressions on the long runs. Some libpod definitions were moved to `libpod/define` to resolve circular dependencies. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* rm: add containers eviction with `rm --force`Marco Vedovati2019-09-25
| | | | | | | | | Add ability to evict a container when it becomes unusable. This may happen when the host setup changes after a container creation, making it impossible for that container to be used or removed. Evicting a container is done using the `rm --force` command. Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* Add function for looking up volumes by partial nameMatthew Heon2019-09-09
| | | | | | | | | | This isn't included in Docker, but seems handy enough. Use the new API for 'volume rm' and 'volume inspect'. Fixes #3891 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add volume stateMatthew Heon2019-09-05
| | | | | | | | | | | | We need to be able to track the number of times a volume has been mounted for tmpfs/nfs/etc volumes. As such, we need a mutable state for volumes. Add one, with the expected update/save methods in both states. There is backwards compat here, in that older volumes without a state will still be accepted. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Re-add locks to volumes.Matthew Heon2019-08-28
| | | | | | | | | | This will require a 'podman system renumber' after being applied to get lock numbers for existing volumes. Add the DB backend code for rewriting volume configs and use it for updating lock numbers as part of 'system renumber'. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Switch Libpod over to new explicit named volumesMatthew Heon2019-04-04
| | | | | | | | | | | | | This swaps the previous handling (parse all volume mounts on the container and look for ones that might refer to named volumes) for the new, explicit named volume lists stored per-container. It also deprecates force-removing volumes that are in use. I don't know how we want to handle this yet, but leaving containers that depend on a volume that no longer exists is definitely not correct. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add ability to rewrite pod configs in the databaseMatthew Heon2019-02-21
| | | | | | Necessary for rewriting lock IDs as part of renumber. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add a function for overwriting container configMatthew Heon2019-02-21
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add "podman volume" commandumohnani82018-12-06
| | | | | | | | | | | | | | | Add support for podman volume and its subcommands. The commands supported are: podman volume create podman volume inspect podman volume ls podman volume rm podman volume prune This is a tool to manage volumes used by podman. For now it only handle named volumes, but eventually it will handle all volumes used by podman. Signed-off-by: umohnani8 <umohnani@redhat.com>
* Set default paths from DB if not explicitly overriddenMatthew Heon2018-12-02
| | | | | | | | | | | If the DB contains default paths, and the user has not explicitly overridden them, use the paths in the DB over our own defaults. The DB validates these paths, so it would error and prevent operation if they did not match. As such, instead of erroring, we can use the DB's paths instead of our own. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Make DB config validation an explicit stepMatthew Heon2018-12-02
| | | | | | | | | | Previously, we implicitly validated runtime configuration against what was stored in the database as part of database init. Make this an explicit step, so we can call it after the database has been initialized. This will allow us to retrieve paths from the database and use them to overwrite our defaults if they differ. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add ability to retrieve runtime configuration from DBMatthew Heon2018-12-02
| | | | | | | | | | When we create a Libpod database, we store a number of runtime configuration fields in it. If we can retrieve those, we can use them to configure the runtime to match the DB instead of inbuilt defaults, helping to ensure that we don't error in cases where our compiled-in defaults changed. Signed-off-by: Matthew Heon <mheon@redhat.com>
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* We need to sort mounts so that one mount does not over mount another.Daniel J Walsh2018-08-10
| | | | | | | | | | | | | | | | | Currently we add mounts from images, volumes and internal. We can accidently over mount an existing mount. This patch sorts the mounts to make sure a parent directory is always mounted before its content. Had to change the default propagation on image volume mounts from shared to private to stop mount points from leaking out of the container. Also switched from using some docker/docker/pkg to container/storage/pkg to remove some dependencies on Docker. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1243 Approved by: mheon
* Update comments in BoltDB and In-Memory statesMatthew Heon2018-07-24
| | | | | | | Better explain the inner workings of both state types in comments to make reviews and changes easier. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Address first round of review commentsMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Ensure pods are part of the set namespace when addedMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Enforce namespace checks on container addMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add namespaces to in memory stateMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add constraint that dependencies must be in the same nsMatthew Heon2018-07-24
| | | | | | | Dependency containers must be in the same namespace, to ensure there are never problems resolving a dependency. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add namespaces and initial constraints to databaseMatthew Heon2018-07-24
| | | | | | | | Add basic awareness of namespaces to the database. As part of this, add constraints so containers can only be added to pods in the same namespace. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add pod stateMatthew Heon2018-05-17
| | | | | | | | | | Add a mutable state to pods, and database backend sutable for modifying and updating said state. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #784 Approved by: rhatdan
* Prevent ctrs not in pods from depending on pod ctrsMatthew Heon2018-03-29
| | | | | | | | | | | | | Containers in pods cannot depend on containers outside of the same pod. Make the reverse true as well - containers not in pods cannot depend on containers in pods. This greatly simplifies our dependency handling, as we can guarantee that removing a pod will not encounter dependency issues. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #558 Approved by: rhatdan
* Containers in a pod can only join namespaces in that podMatthew Heon2018-02-12
| | | | | | | | | | | | | | This solves some dependency problems in the state, and makes sense from a design standpoint. Containers not in a pod can still depend on the namespaces of containers joined to a pod, which we might also want to change in the future. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #184 Approved by: baude
* Add implementation for BoltDB-backed stateMatthew Heon2018-02-12
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #184 Approved by: baude
* Address style issues in in_memory_stateMatthew Heon2018-02-09
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Fix bugs identified by unit testsMatthew Heon2018-02-09
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Rework state tests to avoid boilerplate. Begin adding pod tests.Matthew Heon2018-02-09
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Unify Pod and Container ID and Name registries for in-memory stateMatthew Heon2018-02-09
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Add pod removal codeMatthew Heon2018-02-09
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Tear out pod containers map. Instead rely on stateMatthew Heon2018-02-09
| | | | | | | | | | This ensures that there is only one canonical place where containers in a pod are stored, in the state itself. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #268 Approved by: rhatdan
* Fix in-memory state testsMatthew Heon2018-01-17
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #229 Approved by: rhatdan
* Address review commentsMatthew Heon2018-01-17
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #229 Approved by: rhatdan
* Modify unit tests for state to run on all state implementationsMatthew Heon2018-01-17
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #229 Approved by: rhatdan
* Change handling for pods in libpod stateMatthew Heon2018-01-17
| | | | | | | | | | Add new functions to update pods and add/remove containers from them Use these new functions in place of manually modifying pods Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #229 Approved by: rhatdan
* Add ability to retrieve a pod's container from the stateMatthew Heon2018-01-17
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #229 Approved by: rhatdan
* Add ability for states to track container dependenciesMatthew Heon2018-01-16
| | | | | | | | | | | Also prevent containers with dependencies from being removed from in memory states. SQLite already enforced this via FOREIGN KEY constraints. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #220 Approved by: rhatdan
* Add ability to refresh state in DBMatthew Heon2017-12-07
| | | | | | | Also, ensure we always recreate runtime spec so our net namespace paths will be correct Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Wire SQL backed state into rest of libpodMatthew Heon2017-11-18
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Compile-tested implementation of SQL-backed stateMatthew Heon2017-11-18
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 18:07:01 +0000