| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our previous flow was to perform a hijack before passing a
connection into Libpod, and then Libpod would attach to the
container's attach socket and begin forwarding traffic.
A problem emerges: we write the attach header as soon as the
attach complete. As soon as we write the header, the client
assumes that all is ready, and sends a Start request. This Start
may be processed *before* we successfully finish attaching,
causing us to lose output.
The solution is to handle hijacking inside Libpod. Unfortunately,
this requires a downright extensive refactor of the Attach and
HTTP Exec StartAndAttach code. I think the result is an
improvement in some places (a lot more errors will be handled
with a proper HTTP error code, before the hijack occurs) but
other parts, like the relocation of printing container logs, are
just *bad*. Still, we need this fixed now to get CI back into
good shape...
Fixes #7195
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This came out of a conversation with Valentin about
systemd-managed Podman. He discovered that unit files did not
properly handle cases where Conmon was dead - the ExecStopPost
`podman rm --force` line was not actually removing the container,
but interestingly, adding a `podman cleanup --rm` line would
remove it. Both of these commands do the same thing (minus the
`podman cleanup --rm` command not force-removing running
containers).
Without a running Conmon instance, the container process is still
running (assuming you killed Conmon with SIGKILL and it had no
chance to kill the container it managed), but you can still kill
the container itself with `podman stop` - Conmon is not involved,
only the OCI Runtime. (`podman rm --force` and `podman stop` use
the same code to kill the container). The problem comes when we
want to get the container's exit code - we expect Conmon to make
us an exit file, which it's obviously not going to do, being
dead. The first `podman rm` would fail because of this, but
importantly, it would (after failing to retrieve the exit code
correctly) set container status to Exited, so that the second
`podman cleanup` process would succeed.
To make sure the first `podman rm --force` succeeds, we need to
catch the case where Conmon is already dead, and instead of
waiting for an exit file that will never come, immediately set
the Stopped state and remove an error that can be caught and
handled.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As part of the massive exec rework, I stubbed out a function for
non-detached exec, which is implemented here. It's largely
similar to the existing exec functions, but missing a few pieces.
This also involves implemented a new OCI runtime call for
detached exec. Again, very similar to the other functions, but
with a few missing pieces.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
| |
These are required for detached exec, where they will be used to
clean up and remove exec sessions when they exit.
As part of this, move all Exec related functionality for the
Conmon OCI runtime into a separate file; the existing one was
around 2000 lines.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is heavily based off the existing exec implementation, but
does not presently share code with it, to try and ensure we don't
break anything.
Still to do:
- Add code sharing with existing exec implementation
- Wire in the frontend (exec HTTP endpoint)
- Move all exec-related code in oci_conmon_linux.go into a new
file
- Investigate code sharing between HTTP attach and HTTP exec.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
| |
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
add the ability to attach to a running container. the tunnel side of this is not enabled yet as we have work on the endpoints and plumbing to do yet.
add the ability to exec a command in a running container. the tunnel side is also being deferred for same reason.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
This reverts commit 4b72f9e4013411208751df2a92ab9f322d4da5b2.
Continues what began with revert of
d3d97a25e8c87cf741b2e24ac01ef84962137106 in previous commit.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
Before, we were getting the exit code from the file, in which we waited an arbitrary amount of time (5 seconds) for the file, and segfaulted if we didn't find it. instead, we should be a bit more certain conmon has sent the exit code. Luckily, it sends the exit code along the sync pipe fd, so we can read it from there
Adapt the ExecContainer interface to pass along a channel to get the pid and exit code from conmon, to be able to read both from the pipe
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new APIv2 branch provides an HTTP-based remote API to Podman.
The requirements of this are, unfortunately, incompatible with
the existing Attach API. For non-terminal attach, we need append
a header to what was copied from the container, to multiplex
STDOUT and STDERR; to do this with the old API, we'd need to copy
into an intermediate buffer first, to handle the headers.
To avoid this, provide a new API to handle all aspects of
terminal and non-terminal attach, including closing the hijacked
HTTP connection. This might be a bit too specific, but for now,
it seems to be the simplest approach.
At the same time, add a Resize endpoint. This needs to be a
separate endpoint, so our existing channel approach does not work
here.
I wanted to rework the rest of attach at the same time (some
parts of it, particularly how we start the Attach session and how
we do resizing, are (in my opinion) handled much better here.
That may still be on the table, but I wanted to avoid breaking
existing APIs in this already massive change.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently rely on exec sessions being removed from the state
by the Exec() API itself, on detecting the session stopping. This
is not a reliable method, though. The Podman frontend for exec
could be killed before the session ended, or another Podman
process could be holding the lock and prevent update (most
notable in `run --rm`, when a container with an active exec
session is stopped).
To resolve this, add a function to reap active exec sessions from
the state, and use it on cleanup (to clear sessions after the
container stops) and remove (to do the same when --rm is passed).
This is a bit more complicated than it ought to be because Kata
and company exist, and we can't guarantee the exec session has a
PID on the host, so we have to plumb this through to the OCI
runtime.
Fixes #4666
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a container is created with a given OCI runtime, but then it
is uninstalled or removed from the configuration file, Libpod
presently reacts very poorly. The EvictContainer code can
potentially remove these containers, but we still can't see them
in `podman ps` (aside from the massive logrus.Errorf messages
they create).
Providing a minimal OCI runtime implementation for missing
runtimes allows us to behave better. We'll be able to retrieve
containers from the database, though we still pop up an error for
each missing runtime. For containers which are stopped, we can
remove them as normal.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
| |
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |\
| |
| | |
Use GetRuntimeDir to setup auth.json for login
|
| | |
| |
| |
| | |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
| |
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
The `$PATH` environment variable will now used as fallback if no valid
runtime or conmon path matches. The debug logs has been updated to state
the used executable.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes:
Implement exec -i and fix some typos in description of -i docs
pass failed runtime status to caller
Add resize handling for a terminal connection
Customize exec systemd-cgroup slice
fix healthcheck
fix top
add --detach-keys
Implement podman-remote exec (jhonce)
* Cleanup some orphaned code (jhonce)
adapt remote exec for conmon exec (pehunt)
Fix healthcheck and exec to match docs
Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error
Use these different errors in branching for exit code in healthcheck and exec
Set conmon to use new api version
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
| |
this is the third round of preparing to use the golangci-lint on our
code base.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
| |
clean up and prepare to migrate to the golangci-linter
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
| |
clean up code identified as problematic by golands inspection
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
| |
Matches the behavior of Docker.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
this is phase 2 for the removal of libpod from main.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
request json formatted error messages from the OCI runtime so that we
can nicely print them.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
| |
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
| |
Add a journald reader that translates the journald entry to a k8s-file formatted line, to be added as a log line
Note: --follow with journald hasn't been implemented. It's going to be a larger undertaking that can wait.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
| |
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
| |
replace two usage of kwait.ExponentialBackoff in favor of WaitForFile
that uses inotify when possible.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
build a podman-remote binary for windows that allows users to use the
remote client on windows and interact with podman on linux system.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
* refactor command output to use one function
* Add new worker pool parallel operations
* Implement podman-remote umount
* Refactored podman wait to use printCmdOutput()
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
| |
it can be any OCI runtime.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
from _LIBPOD to _CONTAINERS. The same change was done in buildah
unshare.
This is necessary for podman to detect we are running in a rootless
environment and work properly from a "buildah unshare" session.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SCTP is already present and enabled in the CNI plugins, so all we
need to do to add support is not error on attempting to bind
ports to reserve them.
I investigated adding this binding for SCTP, but support for SCTP
in Go is honestly a mess - there's no widely-supported library
for doing it that will do what we need.
For now, warn that port reservation for SCTP is not supported and
forward the ports.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
| |
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
In the previous version I forgot to add the fds to preserve into
AdditionalFiles. It doesn't make a difference as the files were still
preserved, but this seems to be the correct way of making it
explicit.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
| |
Allow to pass additional FDs to the process being executed.
Closes: https://github.com/containers/libpod/issues/2372
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |\
| |
| | |
Verify that used OCI runtime supports checkpoint
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To be able to use OCI runtimes which do not implement checkpoint/restore
this adds a check to the checkpoint code path and the checkpoint/restore
tests to see if it knows about the checkpoint subcommand. If the used
OCI runtime does not implement checkpoint/restore the tests are skipped
and the actual 'podman container checkpoint' returns an error.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |/
|
|
|
|
| |
Allow passing in of AttachStreams to libpod.Exec() for usage in podman healthcheck. An API caller can now specify different streams for stdout, stderr and stdin, or no streams at all.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
| |
we are doing it few lines above.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
