aboutsummaryrefslogtreecommitdiff
path: root/libpod/options.go
Commit message (Collapse)AuthorAge
* Set base mount options for bind mounts from base systemMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | | | If I mount, say, /usr/bin into my container - I expect to be able to run the executables in that mount. Unconditionally applying noexec would be a bad idea. Before my patches to change mount options and allow exec/dev/suid being set explicitly, we inferred the mount options from where on the base system the mount originated, and the options it had there. Implement the same functionality for the new option handling. There's a lot of performance left on the table here, but I don't know that this is ever going to take enough time to make it worth optimizing. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support for 'exec', 'suid', 'dev' mount flagsMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | | | Previously, we explicitly set noexec/nosuid/nodev on every mount, with no ability to disable them. The 'mount' command on Linux will accept their inverses without complaint, though - 'noexec' is counteracted by 'exec', 'nosuid' by 'suid', etc. Add support for passing these options at the command line to disable our explicit forcing of security options. This also cleans up mount option handling significantly. We are still parsing options in more than one place, which isn't good, but option parsing for bind and tmpfs mounts has been unified. Fixes: #3819 Fixes: #3803 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #3709 from mheon/volume_inspectOpenShift Merge Robot2019-08-19
|\ | | | | Change backend code for 'volume inspect'
| * Implement backend for 'volume inspect'Matthew Heon2019-08-02
| | | | | | | | | | | | | | | | | | Begin to separate the internal structures and frontend for inspect on volumes. We can't rely on keeping internal data structures for external presentation - separating presentation and internal data format is good practice. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #3836 from chenzhiwei/hostnameOpenShift Merge Robot2019-08-19
|\ \ | | | | | | Allow customizing pod hostname
| * | Allow customizing pod hostnameChen Zhiwei2019-08-18
| |/ | | | | | | | | | | | | * set hostname in pod yaml file * set --hostname in pod create command Signed-off-by: Chen Zhiwei <zhiweik@gmail.com>
* / do not activate sd_notify support when varlinkbaude2019-08-15
|/ | | | | | | | | add ability to not activate sd_notify when running under varlink as it causes deadlocks and hangs. Fixes: #3572 Signed-off-by: baude <bbaude@redhat.com>
* Add a flag to set events logger typeMatthew Heon2019-07-31
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman: support --userns=ns|containerGiuseppe Scrivano2019-07-25
| | | | | | | | allow to join the user namespace of another container. Closes: https://github.com/containers/libpod/issues/3629 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* golangci-lint pass number 2baude2019-07-11
| | | | | | clean up and prepare to migrate to the golangci-linter Signed-off-by: baude <bbaude@redhat.com>
* code cleanupbaude2019-07-08
| | | | | | clean up code identified as problematic by golands inspection Signed-off-by: baude <bbaude@redhat.com>
* configure runtime without storebaude2019-07-01
| | | | | | | | | some podman commands do not require the use of a container/image store. in those cases, it is more effecient to not open the store, because that results in having to also close the store which can be costly when the system is under heavy write I/O loads. Signed-off-by: baude <bbaude@redhat.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Make Inspect's mounts struct accurate to DockerMatthew Heon2019-06-12
| | | | | | | | | | | We were formerly dumping spec.Mount structs, with no care as to whether it was user-generated or not - a relic of the very early days when we didn't know whether a user made a mount or not. Now that we do, match our output to Docker's dedicated mount struct. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Address commentsPeter Hunt2019-05-28
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Added --log-driver and journald loggingPeter Hunt2019-05-28
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Move to using constants for valid restart policy typesMatthew Heon2019-05-03
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add container restart policy to Libpod & PodmanMatthew Heon2019-05-03
| | | | | | | This initial version does not support restart count, but it works as advertised otherwise. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2959 from mheon/merge_volume_flagsOpenShift Merge Robot2019-05-03
|\ | | | | Merge volume flags implementation
| * Ensure that named volumes have their options parsedMatthew Heon2019-05-01
| | | | | | | | | | | | | | This involves moving some code out of pkg/spec/ into util/ so it can also be used by libpod. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Small fixes for #2950Matthew Heon2019-05-01
|/ | | | | | | We merged #2950 with some nits still remaining, as Giuseppe was going on PTO. This addresses those small requested changes. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* runtime: pass down the contextGiuseppe Scrivano2019-04-26
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* system: add new subcommand "migrate"Giuseppe Scrivano2019-04-26
| | | | | | | | | | | it is useful to migrate existing containers to a new version of podman. Currently, it is needed to migrate rootless containers that were created with podman <= 1.2 to a newer version which requires all containers to be running in the same user namespace. Closes: https://github.com/containers/libpod/issues/2935 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Update invalid name errors to report the correct regexMatthew Heon2019-04-09
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Drop LocalVolumes from our the databaseMatthew Heon2019-04-04
| | | | | | | | We were never using it. It's actually a potentially quite sizable field (very expensive to decode an array of structs!). Removing it should do no harm. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Create non-existing named volumes at container createMatthew Heon2019-04-04
| | | | | | Replaces old functionality we used for handling image volumes. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add named volumes for each container to databaseMatthew Heon2019-04-04
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2730 from giuseppe/userns-take-rid-of-intermediate-mountnsOpenShift Merge Robot2019-03-29
|\ | | | | userns: do not use an intermediate mount namespace
| * volumes: push the chown logic to runtime_volume_linux.goGiuseppe Scrivano2019-03-29
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #2793 from mheon/alter_name_regexOpenShift Merge Robot2019-03-29
|\ \ | |/ |/| Alter container/pod/volume name regexp to match Docker
| * Alter container/pod/volume name regexp to match DockerMatthew Heon2019-03-29
| | | | | | | | | | | | | | | | | | | | | | | | Docker's upstream name validation regex has two major differences from ours that we pick up in this PR. The first requires that the first character of a name is a letter or number, not a special character. The second allows periods in names. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Ensure that we make a netns for CNI non-default netsMatthew Heon2019-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We accidentally patched this out trying to enable ns:/path/to/ns This should restore the ability to configure nondefault CNI networks with Podman, by ensuring that they request creation of a network namespace. Completely remove the WithNetNS() call when we do use an explicit namespace from a path. We use that call to indicate that a netns is going to be created - there should not be any question about whether it actually does. Fixes #2795 Signed-off-by: Matthew Heon <mheon@redhat.com>
* | vendor buildah, image, storage, cniValentin Rothberg2019-03-28
|/ | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Resolve review commentsMatthew Heon2019-03-27
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support to disable creation of network config filesMatthew Heon2019-03-27
| | | | | | | | Specifically, we want to be able to specify whether resolv.conf and /etc/hosts will be create and bind-mounted into the container. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* libpod: allow to configure path to the network-cmd binaryGiuseppe Scrivano2019-03-11
| | | | | | | | | | | | | allow to configure the path to the network-cmd binary, either via an option flag --network-cmd-path or through the libpod.conf configuration file. This is currently used to customize the path to the slirp4netns binary. Closes: https://github.com/containers/libpod/issues/2506 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* podman healthcheck run (phase 1)baude2019-03-05
| | | | | | | | | Add the ability to manually run a container's healthcheck command. This is only the first phase of implementing the healthcheck. Subsequent pull requests will deal with the exposing the results and history of healthchecks as well as the scheduling. Signed-off-by: baude <bbaude@redhat.com>
* Only remove image volumes when removing containersMatthew Heon2019-02-26
| | | | | | | | | | | | When removing volumes with rm --volumes we want to only remove volumes that were created with the container. Volumes created separately via 'podman volume create' should not be removed. Also ensure that --rm implies volumes will be removed. Fixes #2441 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Validate VolumePath against DB configurationMatthew Heon2019-02-26
| | | | | | | | | If this doesn't match, we end up not being able to access named volumes mounted into containers, which is bad. Use the same validation that we use for other critical paths to ensure this one also matches. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* When location of c/storage root changes, set VolumePathMatthew Heon2019-02-26
| | | | | | | | | | | | | | | We want named volumes to be created in a subdirectory of the c/storage graph root, the same as the libpod root directory is now. As such, we need to adjust its location when the graph root changes location. Also, make a change to how we set the default. There's no need to explicitly set it every time we initialize via an option - that might conflict with WithStorageConfig setting it based on graph root changes. Instead, just initialize it in the default config like our other settings. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix up handling of user defined network namespacesDaniel J Walsh2019-02-23
| | | | | | | | | If user specifies network namespace and the /etc/netns/XXX/resolv.conf exists, we should use this rather then /etc/resolv.conf Also fail cleaner if the user specifies an invalid Network Namespace. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman: --runtime has higher priority on runtime_pathGiuseppe Scrivano2019-02-22
| | | | | | | if --runtime is specified, then it has higher priority on the runtime_path option, which was added for backward compatibility. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Do not make renumber shut down the runtimeMatthew Heon2019-02-21
| | | | | | | | | | | | | | | The original intent behind the requirement was to ensure that, if two SHM lock structs were open at the same time, we should not make such a runtime available to the user, and should clean it up instead. It turns out that we don't even need to open a second SHM lock struct - if we get an error mapping the first one due to a lock count mismatch, we can just delete it, and it cleans itself up when it errors. So there's no reason not to return a valid runtime. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move RenumberLocks into runtime initMatthew Heon2019-02-21
| | | | | | | | | | | | | | | | | | We can't do renumbering after init - we need to open a potentially invalid locks file (too many/too few locks), and then potentially delete the old locks and make new ones. We need to be in init to bypass the checks that would otherwise make this impossible. This leaves us with two choices: make RenumberLocks a separate entrypoint from NewRuntime, duplicating a lot of configuration load code (we need to know where the locks live, how many there are, etc) - or modify NewRuntime to allow renumbering during it. Previous experience says the first is not really a viable option and produces massive code bloat, so the second it is. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix volume handling in podmanDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* oci: allow to define multiple OCI runtimesGiuseppe Scrivano2019-01-14
| | | | | | | | | | | | | | | | | | | | | | | | we can define multiple OCI runtimes that can be chosen with --runtime. in libpod.conf is possible to specify them with: [runtimes] foo = [ "/usr/bin/foo", "/usr/sbin/foo", ] bar = [ "/usr/bin/foo", "/usr/sbin/foo", ] If the argument to --runtime is an absolute path then it is used directly without any lookup in the configuration. Closes: https://github.com/containers/libpod/issues/1750 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* libpod: allow multiple oci runtimesVincent Batts2019-01-14
| | | | | | | | | | This deprecates the libpod.conf variable of `runtime_path=`, and now has `runtimes=`, like a map for naming the runtime, preparing for a `--runtime` flag to `podman run` (i.e. runc, kata, etc.) Reference: https://github.com/containers/libpod/issues/1750 Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
* Switch all referencs to image.ContainerConfig to image.ConfigDaniel J Walsh2018-12-21
| | | | | | This will more closely match what Docker is doing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure storage options are properly initializedMatthew Heon2018-12-10
| | | | | | | | | If one of storage GraphRoot or RunRoot are specified, but the other is not, c/storage will not use the default, and will throw an error instead. Ensure that in cases where this would happen, we populate the fields with the c/storage defaults ourselves. Signed-off-by: Matthew Heon <mheon@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-30 22:52:28 +0000