| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make Podman pod operations that do not involve starting
containers (which needs to be done in a specific order) use the
same parallel operation code we use to make `podman stop` on
large numbers of containers fast. We were previously stopping
containers in a pod serially, which could take up to the timeout
(default 15 seconds) for each container - stopping 100 containers
that do not respond to SIGTERM would take 25 minutes.
To do this, refactor the parallel operation code a bit to remove
its dependency on libpod (damn circular import restrictions...)
and use parallel functions that just re-use the standard
container API operations - maximizes code reuse (previously each
pod handler had a separate implementation of the container
function it performed).
This is a bit of a palate cleanser after fighting CI for two
days - nice to be able to return to a land of sanity.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
flag --network=slirp4netns[options] for root and rootless pods
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
| |
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
| |
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
We were hard-coding two fields to false, instead of grabbing
their value from the pod config, which means that `pod inspect`
would print the wrong value always.
Fixes #6968
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
We had a field for this in the inspect data, but it was never
being populated. Because of this, `podman pod inspect` stopped
showing port bindings (and other infra container settings). Add
code to populate the infra container inspect data, and add a test
to ensure we don't regress again.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The infra/abi code for pods was written in a flawed way, assuming
that the map[string]error containing individual container errors
was only set when the global error for the pod function was nil;
that is not accurate, and we are actually *guaranteed* to set the
global error when any individual container errors. Thus, we'd
never actually include individual container errors, because the
infra code assumed that err being set meant everything failed and
no container operations were attempted.
We were originally setting the cause of the error to something
nonsensical ("container already exists"), so I made a new error
indicating that some containers in the pod failed. We can then
ignore that error when building the report on the pod operation
and actually return errors from individual containers.
Unfortunately, this exposed another weakness of the infra code,
which was discarding the container IDs. Errors from individual
containers are not guaranteed to identify which container they
came from, hence the use of map[string]error in the Pod API
functions. Rather than restructuring the structs we return from
pkg/infra, I just wrapped the returned errors with a message
including the ID of the container.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
- misspell
- prealloc
- unparam
- nakedret
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we moved to the new Namespace types in Specgen, we made a
distinction between taking a namespace from a pod, and taking it
from another container. Due to this new distinction, some code
that previously worked for both `--pod=$ID` and
`--uts=container:$ID` has accidentally become conditional on only
the latter case. This happened for Hostname - we weren't properly
setting it in cases where the container joined a pod.
Fortunately, this is an easy fix once we know to check the
condition.
Also, ensure that `podman pod inspect` actually prints hostname.
Fixes #6494
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This one was a massive pain to track down.
The original symptom was an error message from rootless Podman
trying to make a container in a pod. I unfortunately did not look
at the error message closely enough to realize that the namespace
in question was the cgroup namespace (the reproducer pod was
explicitly set to only share the network namespace), else this
would have been quite a bit shorter.
I spent considerable effort trying to track down differences
between the inspect output of the two containers, and when that
failed I was forced to resort to diffing the OCI specs. That
finally proved fruitful, and I was able to determine what should
have been obvious all along: the container was joining the cgroup
namespace of the infra container when it really ought not to
have.
From there, I discovered a variable collision in pod config. The
UsePodCgroup variable means "create a parent cgroup for the pod
and join containers in the pod to it". Unfortunately, it is very
similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares
this namespace", so an accessor was accidentally added for it
that indicated the pod shared the cgroup namespace when it really
did not. Once I realized that, it was a quick fix - add a bool to
the pod's configuration to indicate whether the cgroup ns was
shared (distinct from UsePodCgroup) and use that for the
accessor.
Also included are fixes for `podman inspect` and
`podman pod inspect` that fix them to actually display the state
of the cgroup namespace (for container inspect) and what
namespaces are shared (for pod inspect). Either of those would
have made tracking this down considerably quicker.
Fixes #6149
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
| |
Added status field in pod inspect report.
Fixed pod tests to use it.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |
|
|
|
|
| |
rid ourseleves of libpod references in v2 client
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
Modify the pod inspect bindings to hold current pod status.
Includes test to validate on pod status and added test to check
no or few pods are pruned,if the pods are in exited state.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
When a container is in a PID namespace, it is enought to send
the stop signal to the PID 1 of the namespace, only send signals
to all processes in the container when the container is not in
a pid namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
| |
Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
If you are running a rootless container on cgroupV1
you can not pause the container. We need to report the proper error
if this happens.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Support generating systemd unit files for a pod. Podman generates one
unit file for the pod including the PID file for the infra container's
conmon process and one unit file for each container (excluding the infra
container).
Note that this change implies refactorings in the `pkg/systemdgen` API.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
| |
this is phase 2 for the removal of libpod from main.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
Noticed this when testing some behavior with Docker.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
like podman stop of containers, we should allow the user to specify
a timeout override when stopping pods; otherwise they have to wait
the full timeout time specified during the pod/container creation.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To work better with Kata containers, we need to delete() from the
OCI runtime as a part of cleanup, to ensure resources aren't
retained longer than they need to be.
To enable this, we need to add a new state to containers,
ContainerStateExited. Containers transition from
ContainerStateStopped to ContainerStateExited via cleanupRuntime
which is invoked as part of cleanup(). A container in the Exited
state is identical to Stopped, except it has been removed from
the OCI runtime and thus will be handled differently when
initializing the container.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
|
| |
|
|
|
|
|
| |
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
|
| |
|
|
|
|
|
|
|
| |
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
|
| |
|
|
|
|
|
|
|
| |
To better reflect it's usage: to share functions between podman and varlink.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1275
Approved by: mheon
|
| |
|
|
|
|
|
| |
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1275
Approved by: mheon
|
| |
|
|
|
|
|
|
|
|
| |
Specifically, pod.Start() always returned CtrErrors, even if none failed. This cause podman start to not return the successfully started pod id.
Also, pod.Kill() didn't return an error along with ctrErrors.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1272
Approved by: rhatdan
|
| |
|
|
|
|
|
|
|
|
| |
Also, don't return the internal podState struct - instead return
a public inspect struct.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1258
Approved by: rhatdan
|
|
|
This removes anything but structs and simple accessors from
pod.go itself, which is a target file for FFJSON generation. This
should reduce the amount of times FFJSON needs to run.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1247
Approved by: rhatdan
|
