summaryrefslogtreecommitdiff
path: root/libpod/pod_api.go
Commit message (Collapse)AuthorAge
* libpod: do not call (*container).Config()Valentin Rothberg2021-09-29
| | | | | | | | | | | | | | Access the container's config field directly inside of libpod instead of calling `Config()` which in turn creates expensive JSON deep copies. Accessing the field directly drops memory consumption of a simple `podman run --rm busybox true` from 1245kB to 410kB. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com> <MH: Fixed cherry-pick conflicts>
* Remove pod create options `--cpus` and `--cpuset-cpus`Matthew Heon2021-09-16
| | | | | | | These are not presently functional - we need a rewrite of how the pod cgroup is handled first. Signed-off-by: Matthew Heon <mheon@redhat.com>
* InfraContainer Reworkcdoern2021-08-26
| | | | | | | | | | InfraContainer should go through the same creation process as regular containers. This change was from the cmd level down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state) Signed-off-by: cdoern <cdoern@redhat.com>
* podman inspect show exposed portsPaul Holzinger2021-08-24
| | | | | | | | | | | | | | Podman inspect has to show exposed ports to match docker. This requires storing the exposed ports in the container config. A exposed port is shown as `"80/tcp": null` while a forwarded port is shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`. Also make sure to add the exposed ports to the new image when the container is commited. Fixes #10777 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* rename oneshot initcontainers to onceBrent Baude2021-08-12
| | | | | | | | | | after the init containers pr merged, it was suggested to use `once` instead of `oneshot` containers as it is more aligned with other terminiology used similarily. [NO TESTS NEEDED] Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* implement init containers in podmanBrent Baude2021-08-04
| | | | | | | | | | | | | | this is the first pass at implementing init containers for podman pods. init containersare made popular by k8s as a way to run setup for pods before the pods standard containers run. unlike k8s, we support two styles of init containers: always and oneshot. always means the container stays in the pod and starts whenever a pod is started. this does not apply to pods restarting. oneshot means the container runs onetime when the pod starts and then is removed. Signed-off-by: Brent Baude <bbaude@redhat.com>
* podman pod create --pid flagcdoern2021-07-15
| | | | | | | | added support for --pid flag. User can specify ns:file, pod, private, or host. container returns an error since you cannot point the ns of the pods infra container to a container outside of the pod. Signed-off-by: cdoern <cdoern@redhat.com>
* Podman Pod Create --cpus and --cpuset-cpus flagscdoern2021-06-23
| | | | | | | | | | | | Added logic and handling for two new Podman pod create Flags. --cpus specifies the total number of cores on which the pod can execute, this is a combination of the period and quota for the CPU. --cpuset-cpus is a string value which determines of these available cores, how many we will truly execute on. Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix podman pod inspect show wrong MAC stringzhangguanzhang2020-11-18
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* Add a Degraded state to podsMatthew Heon2020-10-21
| | | | | | | | | | | | | Make a distinction between pods that are completely running (all containers running) and those that have some containers going, but not all, by introducing an intermediate state between Stopped and Running called Degraded. A Degraded pod has at least one, but not all, containers running; a Running pod has all containers running. First step to a solution for #7213. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move pod jobs to parallel executionMatthew Heon2020-10-07
| | | | | | | | | | | | | | | | | | | | | | Make Podman pod operations that do not involve starting containers (which needs to be done in a specific order) use the same parallel operation code we use to make `podman stop` on large numbers of containers fast. We were previously stopping containers in a pod serially, which could take up to the timeout (default 15 seconds) for each container - stopping 100 containers that do not respond to SIGTERM would take 25 minutes. To do this, refactor the parallel operation code a bit to remove its dependency on libpod (damn circular import restrictions...) and use parallel functions that just re-use the standard container API operations - maximizes code reuse (previously each pod handler had a separate implementation of the container function it performed). This is a bit of a palate cleanser after fighting CI for two days - nice to be able to return to a land of sanity. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support for slirp network for podsAshley Cui2020-09-25
| | | | | | flag --network=slirp4netns[options] for root and rootless pods Signed-off-by: Ashley Cui <acui@redhat.com>
* Clean up pods before returning from Pod Stop API callMatthew Heon2020-08-17
| | | | | | | This should help alleviate races where the pod is not fully cleaned up before subsequent API calls happen. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix lintMatthew Heon2020-07-14
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Populate remaining unused fields in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | We were hard-coding two fields to false, instead of grabbing their value from the pod config, which means that `pod inspect` would print the wrong value always. Fixes #6968 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Include infra container information in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | We had a field for this in the inspect data, but it was never being populated. Because of this, `podman pod inspect` stopped showing port bindings (and other infra container settings). Add code to populate the infra container inspect data, and add a test to ensure we don't regress again. Signed-off-by: Matthew Heon <mheon@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Print errors from individual containers in podsMatthew Heon2020-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | The infra/abi code for pods was written in a flawed way, assuming that the map[string]error containing individual container errors was only set when the global error for the pod function was nil; that is not accurate, and we are actually *guaranteed* to set the global error when any individual container errors. Thus, we'd never actually include individual container errors, because the infra code assumed that err being set meant everything failed and no container operations were attempted. We were originally setting the cause of the error to something nonsensical ("container already exists"), so I made a new error indicating that some containers in the pod failed. We can then ignore that error when building the report on the pod operation and actually return errors from individual containers. Unfortunately, this exposed another weakness of the infra code, which was discarding the container IDs. Errors from individual containers are not guaranteed to identify which container they came from, hence the use of map[string]error in the Pod API functions. Rather than restructuring the structs we return from pkg/infra, I just wrapped the returned errors with a message including the ID of the container. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Turn on More lintersDaniel J Walsh2020-06-15
| | | | | | | | | - misspell - prealloc - unparam - nakedret Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* pod config: add a `CreateCommand` fieldValentin Rothberg2020-06-11
| | | | | | | | | | | | | | Add a `CreateCommand` field to the pod config which includes the entire `os.Args` at pod-creation. Similar to the already existing field in a container config, we need this information to properly generate generic systemd unit files for pods. It's a prerequisite to support the `--new` flag for pods. Also add the `CreateCommand` to the pod-inspect data, which can come in handy for debugging, general inspection and certainly for the tests that are added along with the other changes. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Ensure that containers in pods properly set hostnameMatthew Heon2020-06-04
| | | | | | | | | | | | | | | | | | When we moved to the new Namespace types in Specgen, we made a distinction between taking a namespace from a pod, and taking it from another container. Due to this new distinction, some code that previously worked for both `--pod=$ID` and `--uts=container:$ID` has accidentally become conditional on only the latter case. This happened for Hostname - we weren't properly setting it in cases where the container joined a pod. Fortunately, this is an easy fix once we know to check the condition. Also, ensure that `podman pod inspect` actually prints hostname. Fixes #6494 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix bug where pods would unintentionally share cgroupnsMatthew Heon2020-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This one was a massive pain to track down. The original symptom was an error message from rootless Podman trying to make a container in a pod. I unfortunately did not look at the error message closely enough to realize that the namespace in question was the cgroup namespace (the reproducer pod was explicitly set to only share the network namespace), else this would have been quite a bit shorter. I spent considerable effort trying to track down differences between the inspect output of the two containers, and when that failed I was forced to resort to diffing the OCI specs. That finally proved fruitful, and I was able to determine what should have been obvious all along: the container was joining the cgroup namespace of the infra container when it really ought not to have. From there, I discovered a variable collision in pod config. The UsePodCgroup variable means "create a parent cgroup for the pod and join containers in the pod to it". Unfortunately, it is very similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares this namespace", so an accessor was accidentally added for it that indicated the pod shared the cgroup namespace when it really did not. Once I realized that, it was a quick fix - add a bool to the pod's configuration to indicate whether the cgroup ns was shared (distinct from UsePodCgroup) and use that for the accessor. Also included are fixes for `podman inspect` and `podman pod inspect` that fix them to actually display the state of the cgroup namespace (for container inspect) and what namespaces are shared (for pod inspect). Either of those would have made tracking this down considerably quicker. Fixes #6149 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Update pod inspect report to hold current pod status.Sujil022020-04-20
| | | | | | | Added status field in pod inspect report. Fixed pod tests to use it. Signed-off-by: Sujil02 <sushah@redhat.com>
* podman v2 remove bloat v2Brent Baude2020-04-16
| | | | | | rid ourseleves of libpod references in v2 client Signed-off-by: Brent Baude <bbaude@redhat.com>
* Update pod bindings and Add test to validate prune pod apiv2 binding.Sujil022020-02-28
| | | | | | | | Modify the pod inspect bindings to hold current pod status. Includes test to validate on pod status and added test to check no or few pods are pruned,if the pods are in exited state. Signed-off-by: Sujil02 <sushah@redhat.com>
* if container is not in a pid namespace, stop all processesDaniel J Walsh2019-12-19
| | | | | | | | | When a container is in a PID namespace, it is enought to send the stop signal to the PID 1 of the namespace, only send signals to all processes in the container when the container is not in a pid namespace. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* codespell: spelling correctionsDmitry Smirnov2019-11-13
| | | | Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
* Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Report errors when trying to pause rootless containersDaniel J Walsh2019-09-13
| | | | | | | | If you are running a rootless container on cgroupV1 you can not pause the container. We need to report the proper error if this happens. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* generate systemd: support pods and geneartig filesValentin Rothberg2019-08-21
| | | | | | | | | | | Support generating systemd unit files for a pod. Podman generates one unit file for the pod including the PID file for the infra container's conmon process and one unit file for each container (excluding the infra container). Note that this change implies refactorings in the `pkg/systemdgen` API. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* libpod removal from main (phase 2)baude2019-06-27
| | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Begin adding support for multiple OCI runtimesMatthew Heon2019-06-19
| | | | | | | | | | | | | Allow Podman containers to request to use a specific OCI runtime if multiple runtimes are configured. This is the first step to properly supporting containers in a multi-runtime environment. The biggest changes are that all OCI runtimes are now initialized when Podman creates its runtime, and containers now use the runtime requested in their configuration (instead of always the default runtime). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Sending signals to containers prevents restart policyMatthew Heon2019-05-03
| | | | | | Noticed this when testing some behavior with Docker. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Remove ulele/deepcopier in favor of JSON deep copyMatthew Heon2019-03-27
| | | | | | | | | | | | | We have a very high performance JSON library that doesn't need to perform code generation. Let's use it instead of our questionably performant, reflection-dependent deep copy library. Most changes because some functions can now return errors. Also converts cmd/podman to use jsoniter, instead of pkg/json, for increased performance. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* add timeout to pod stopbaude2018-12-07
| | | | | | | | like podman stop of containers, we should allow the user to specify a timeout override when stopping pods; otherwise they have to wait the full timeout time specified during the pod/container creation. Signed-off-by: baude <bbaude@redhat.com>
* Add ContainerStateExited and OCI delete() in cleanup()Matthew Heon2018-10-02
| | | | | | | | | | | | | | | | To work better with Kata containers, we need to delete() from the OCI runtime as a part of cleanup, to ensure resources aren't retained longer than they need to be. To enable this, we need to add a new state to containers, ContainerStateExited. Containers transition from ContainerStateStopped to ContainerStateExited via cleanupRuntime which is invoked as part of cleanup(). A container in the Exited state is identical to Stopped, except it has been removed from the OCI runtime and thus will be handled differently when initializing the container. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Fixing network ns segfaulthaircommander2018-08-23
| | | | | | | | | As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Change pause container to infra containerhaircommander2018-08-23
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Added option to share kernel namespaces in libpod and podmanhaircommander2018-08-23
| | | | | | | | | A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Change batchcontainer to sharedhaircommander2018-08-16
| | | | | | | | | To better reflect it's usage: to share functions between podman and varlink. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1275 Approved by: mheon
* Moved getPodStatus to pod API to be used in varlinkhaircommander2018-08-16
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1275 Approved by: mheon
* Updated pod_api to reflect function spechaircommander2018-08-14
| | | | | | | | | | Specifically, pod.Start() always returned CtrErrors, even if none failed. This cause podman start to not return the successfully started pod id. Also, pod.Kill() didn't return an error along with ctrErrors. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1272 Approved by: rhatdan
* Ensure pod inspect is locked and validity-checkedMatthew Heon2018-08-11
| | | | | | | | | | Also, don't return the internal podState struct - instead return a public inspect struct. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1258 Approved by: rhatdan
* Split pod.go into 3 filesMatthew Heon2018-08-10
This removes anything but structs and simple accessors from pod.go itself, which is a target file for FFJSON generation. This should reduce the amount of times FFJSON needs to run. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1247 Approved by: rhatdan
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 10:04:38 +0000