aboutsummaryrefslogtreecommitdiff
path: root/libpod/pod_api.go
Commit message (Collapse)AuthorAge
* Fix stuttersDaniel J Walsh2022-09-10
| | | | | | | | | | | | | | Podman adds an Error: to every error message. So starting an error message with "error" ends up being reported to the user as Error: error ... This patch removes the stutter. Also ioutil.ReadFile errors report the Path, so wrapping the err message with the path causes a stutter. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* resource limits for podsCharlie Doern2022-07-21
| | | | | | | | | | | | | | | | | | added the following flags and handling for podman pod create --memory-swap --cpuset-mems --device-read-bps --device-write-bps --blkio-weight --blkio-weight-device --cpu-shares given the new backend for systemd in c/common, all of these can now be exposed to pod create. most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here as well! Signed-off-by: Charlie Doern <cdoern@redhat.com>
* Merge pull request #14501 from cdoern/podUTSopenshift-ci[bot]2022-07-06
|\ | | | | podman pod create --uts support
| * podman pod create --uts supportcdoern2022-07-05
| | | | | | | | | | | | | | | | | | | | | | | | add support for the --uts flag in pod create, allowing users to avoid issues with default values in containers.conf. uts follows the same format as other namespace flags: --uts=private (default), --uts=host, --uts=ns:PATH resolves #13714 Signed-off-by: Charlie Doern <cdoern@redhat.com>
* | libpod: switch to golang native error wrappingSascha Grunert2022-07-05
|/ | | | | | | | | We now use the golang error wrapping format specifier `%w` instead of the deprecated github.com/pkg/errors package. [NO NEW TESTS NEEDED] Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
* podman pod create --memoryCharlie Doern2022-07-01
| | | | | | | | using the new resource backend, implement podman pod create --memory which enables users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all children unless overriden Signed-off-by: Charlie Doern <cdoern@redhat.com>
* patch for pod host networking & other host namespace handlingcdoern2022-06-09
| | | | | | | | | this patch included additonal host namespace checks when creating a ctr as well as fixing of the tests to check /proc/self/ns/net see #14461 Signed-off-by: cdoern <cdoern@redhat.com>
* Remove more FIXMEsMatthew Heon2022-05-25
| | | | | | | | | Mostly, just removing the comments. These either have been done, or are no longer a good idea. No code changes. [NO NEW TESTS NEEDED] as such. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* play kube: service containerValentin Rothberg2022-05-12
| | | | | | | | | | | | | | | | | | | | Add the notion of a "service container" to play kube. A service container is started before the pods in play kube and is (reverse) linked to them. The service container is stopped/removed *after* all pods it is associated with are stopped/removed. In other words, a service container tracks the entire life cycle of a service started via `podman play kube`. This is required to enable `play kube` in a systemd unit file. The service container is only used when the `--service-container` flag is set on the CLI. This flag has been marked as hidden as it is not meant to be used outside the context of `play kube`. It is further not supported on the remote client. The wiring with systemd will be done in a later commit. Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* pod: add exit policiesValentin Rothberg2022-05-02
| | | | | | | | | | | | | | | | | | | | | | | | Add the notion of an "exit policy" to a pod. This policy controls the behaviour when the last container of pod exits. Initially, there are two policies: - "continue" : the pod continues running. This is the default policy when creating a pod. - "stop" : stop the pod when the last container exits. This is the default behaviour for `play kube`. In order to implement the deferred stop of a pod, add a worker queue to the libpod runtime. The queue will pick up work items and in this case helps resolve dead locks that would otherwise occur if we attempted to stop a pod during container cleanup. Note that the default restart policy of `play kube` is "Always". Hence, in order to really solve #13464, the YAML files must set a custom restart policy; the tests use "OnFailure". Fixes: #13464 Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Report properly whether pod shares host networkDaniel J Walsh2022-04-28
| | | | | | Fixes: https://github.com/containers/podman/issues/14028 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* fix pod volume passing and alter infra inheritancecdoern2022-03-29
| | | | | | | | | | | | | the infra Inherit function was not properly passing pod volume information to new containers alter the inherit function and struct to use the new `ConfigToSpec` function used in clone pick and choose the proper entities from a temp spec and validate them on the spegen side rather than passing directly to a config resolves #13548 Signed-off-by: cdoern <cbdoer23@g.holycross.edu> Signed-off-by: cdoern <cdoern@redhat.com> Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Pod Security Option supportcdoern2021-12-27
| | | | | | | | | | | | | Added support for pod security options. These are applied to infra and passed down to the containers as added (unless overridden). Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit` This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create code and pod creation. resolves #12173 Signed-off-by: cdoern <cdoern@redhat.com>
* network db: add new strucutre to container createPaul Holzinger2021-12-14
| | | | | | | | | | Make sure we create new containers in the db with the correct structure. Also remove some unneeded code for alias handling. We no longer need this functions. The specgen format has not been changed for now. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Update vendor or containers/common moving pkg/cgroups thereDaniel J Walsh2021-12-07
| | | | | | | [NO NEW TESTS NEEDED] This is just moving pkg/cgroups out so existing tests should be fine. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --time out for podman * rm -f commandsDaniel J Walsh2021-10-04
| | | | | | | | | Add --time flag to podman container rm Add --time flag to podman pod rm Add --time flag to podman volume rm Add --time flag to podman network rm Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Pod Volumes From Supportcdoern2021-10-01
| | | | | | | added support for a volumes from container. this flag just required movement of the volumes-from flag declaration out of the !IsInfra block, and minor modificaions to container_create.go Signed-off-by: cdoern <cdoern@redhat.com>
* Merge pull request #11686 from cdoern/podDeviceOptionsOpenShift Merge Robot2021-10-01
|\ | | | | Pod Device-Read-BPS support
| * Pod Device-Read-BPS supportcdoern2021-09-28
| | | | | | | | | | | | | | | | | | added the option for the user to specify a rate, in bytes, at which they would like to be able to read from the device being added to the pod. This is the first in a line of pod device options. WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name Signed-off-by: cdoern <cdoern@redhat.com>
* | libpod: do not call (*container).Config()Valentin Rothberg2021-09-28
| | | | | | | | | | | | | | | | | | | | | | | | Access the container's config field directly inside of libpod instead of calling `Config()` which in turn creates expensive JSON deep copies. Accessing the field directly drops memory consumption of a simple `podman run --rm busybox true` from 1245kB to 410kB. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | standardize logrus messages to upper caseDaniel J Walsh2021-09-22
|/ | | | | | | | Remove ERROR: Error stutter from logrus messages also. [ NO TESTS NEEDED] This is just code cleanup. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Pod Device Supportcdoern2021-09-20
| | | | | | | | | | added support for pod devices. The device gets added to the infra container and recreated in all containers that join the pod. This required a new container config item to keep track of the original device passed in by the user before the path was parsed into the container device. Signed-off-by: cdoern <cdoern@redhat.com>
* Pod Volumes Supportcdoern2021-09-14
| | | | | | | | | added support for the --volume flag in pods using the new infra container design. users can specify all volume options they can with regular containers resolves #10379 Signed-off-by: cdoern <cdoern@redhat.com>
* InfraContainer Reworkcdoern2021-08-26
| | | | | | | | | | InfraContainer should go through the same creation process as regular containers. This change was from the cmd level down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state) Signed-off-by: cdoern <cdoern@redhat.com>
* podman inspect show exposed portsPaul Holzinger2021-08-24
| | | | | | | | | | | | | | Podman inspect has to show exposed ports to match docker. This requires storing the exposed ports in the container config. A exposed port is shown as `"80/tcp": null` while a forwarded port is shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`. Also make sure to add the exposed ports to the new image when the container is commited. Fixes #10777 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* rename oneshot initcontainers to onceBrent Baude2021-08-12
| | | | | | | | | | after the init containers pr merged, it was suggested to use `once` instead of `oneshot` containers as it is more aligned with other terminiology used similarily. [NO TESTS NEEDED] Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* implement init containers in podmanBrent Baude2021-08-04
| | | | | | | | | | | | | | this is the first pass at implementing init containers for podman pods. init containersare made popular by k8s as a way to run setup for pods before the pods standard containers run. unlike k8s, we support two styles of init containers: always and oneshot. always means the container stays in the pod and starts whenever a pod is started. this does not apply to pods restarting. oneshot means the container runs onetime when the pod starts and then is removed. Signed-off-by: Brent Baude <bbaude@redhat.com>
* podman pod create --pid flagcdoern2021-07-15
| | | | | | | | added support for --pid flag. User can specify ns:file, pod, private, or host. container returns an error since you cannot point the ns of the pods infra container to a container outside of the pod. Signed-off-by: cdoern <cdoern@redhat.com>
* Podman Pod Create --cpus and --cpuset-cpus flagscdoern2021-06-23
| | | | | | | | | | | | Added logic and handling for two new Podman pod create Flags. --cpus specifies the total number of cores on which the pod can execute, this is a combination of the period and quota for the CPU. --cpuset-cpus is a string value which determines of these available cores, how many we will truly execute on. Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix podman pod inspect show wrong MAC stringzhangguanzhang2020-11-18
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* Add a Degraded state to podsMatthew Heon2020-10-21
| | | | | | | | | | | | | Make a distinction between pods that are completely running (all containers running) and those that have some containers going, but not all, by introducing an intermediate state between Stopped and Running called Degraded. A Degraded pod has at least one, but not all, containers running; a Running pod has all containers running. First step to a solution for #7213. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move pod jobs to parallel executionMatthew Heon2020-10-07
| | | | | | | | | | | | | | | | | | | | | | Make Podman pod operations that do not involve starting containers (which needs to be done in a specific order) use the same parallel operation code we use to make `podman stop` on large numbers of containers fast. We were previously stopping containers in a pod serially, which could take up to the timeout (default 15 seconds) for each container - stopping 100 containers that do not respond to SIGTERM would take 25 minutes. To do this, refactor the parallel operation code a bit to remove its dependency on libpod (damn circular import restrictions...) and use parallel functions that just re-use the standard container API operations - maximizes code reuse (previously each pod handler had a separate implementation of the container function it performed). This is a bit of a palate cleanser after fighting CI for two days - nice to be able to return to a land of sanity. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support for slirp network for podsAshley Cui2020-09-25
| | | | | | flag --network=slirp4netns[options] for root and rootless pods Signed-off-by: Ashley Cui <acui@redhat.com>
* Clean up pods before returning from Pod Stop API callMatthew Heon2020-08-17
| | | | | | | This should help alleviate races where the pod is not fully cleaned up before subsequent API calls happen. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix lintMatthew Heon2020-07-14
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Populate remaining unused fields in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | We were hard-coding two fields to false, instead of grabbing their value from the pod config, which means that `pod inspect` would print the wrong value always. Fixes #6968 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Include infra container information in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | We had a field for this in the inspect data, but it was never being populated. Because of this, `podman pod inspect` stopped showing port bindings (and other infra container settings). Add code to populate the infra container inspect data, and add a test to ensure we don't regress again. Signed-off-by: Matthew Heon <mheon@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Print errors from individual containers in podsMatthew Heon2020-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | The infra/abi code for pods was written in a flawed way, assuming that the map[string]error containing individual container errors was only set when the global error for the pod function was nil; that is not accurate, and we are actually *guaranteed* to set the global error when any individual container errors. Thus, we'd never actually include individual container errors, because the infra code assumed that err being set meant everything failed and no container operations were attempted. We were originally setting the cause of the error to something nonsensical ("container already exists"), so I made a new error indicating that some containers in the pod failed. We can then ignore that error when building the report on the pod operation and actually return errors from individual containers. Unfortunately, this exposed another weakness of the infra code, which was discarding the container IDs. Errors from individual containers are not guaranteed to identify which container they came from, hence the use of map[string]error in the Pod API functions. Rather than restructuring the structs we return from pkg/infra, I just wrapped the returned errors with a message including the ID of the container. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Turn on More lintersDaniel J Walsh2020-06-15
| | | | | | | | | - misspell - prealloc - unparam - nakedret Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* pod config: add a `CreateCommand` fieldValentin Rothberg2020-06-11
| | | | | | | | | | | | | | Add a `CreateCommand` field to the pod config which includes the entire `os.Args` at pod-creation. Similar to the already existing field in a container config, we need this information to properly generate generic systemd unit files for pods. It's a prerequisite to support the `--new` flag for pods. Also add the `CreateCommand` to the pod-inspect data, which can come in handy for debugging, general inspection and certainly for the tests that are added along with the other changes. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Ensure that containers in pods properly set hostnameMatthew Heon2020-06-04
| | | | | | | | | | | | | | | | | | When we moved to the new Namespace types in Specgen, we made a distinction between taking a namespace from a pod, and taking it from another container. Due to this new distinction, some code that previously worked for both `--pod=$ID` and `--uts=container:$ID` has accidentally become conditional on only the latter case. This happened for Hostname - we weren't properly setting it in cases where the container joined a pod. Fortunately, this is an easy fix once we know to check the condition. Also, ensure that `podman pod inspect` actually prints hostname. Fixes #6494 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix bug where pods would unintentionally share cgroupnsMatthew Heon2020-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This one was a massive pain to track down. The original symptom was an error message from rootless Podman trying to make a container in a pod. I unfortunately did not look at the error message closely enough to realize that the namespace in question was the cgroup namespace (the reproducer pod was explicitly set to only share the network namespace), else this would have been quite a bit shorter. I spent considerable effort trying to track down differences between the inspect output of the two containers, and when that failed I was forced to resort to diffing the OCI specs. That finally proved fruitful, and I was able to determine what should have been obvious all along: the container was joining the cgroup namespace of the infra container when it really ought not to have. From there, I discovered a variable collision in pod config. The UsePodCgroup variable means "create a parent cgroup for the pod and join containers in the pod to it". Unfortunately, it is very similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares this namespace", so an accessor was accidentally added for it that indicated the pod shared the cgroup namespace when it really did not. Once I realized that, it was a quick fix - add a bool to the pod's configuration to indicate whether the cgroup ns was shared (distinct from UsePodCgroup) and use that for the accessor. Also included are fixes for `podman inspect` and `podman pod inspect` that fix them to actually display the state of the cgroup namespace (for container inspect) and what namespaces are shared (for pod inspect). Either of those would have made tracking this down considerably quicker. Fixes #6149 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Update pod inspect report to hold current pod status.Sujil022020-04-20
| | | | | | | Added status field in pod inspect report. Fixed pod tests to use it. Signed-off-by: Sujil02 <sushah@redhat.com>
* podman v2 remove bloat v2Brent Baude2020-04-16
| | | | | | rid ourseleves of libpod references in v2 client Signed-off-by: Brent Baude <bbaude@redhat.com>
* Update pod bindings and Add test to validate prune pod apiv2 binding.Sujil022020-02-28
| | | | | | | | Modify the pod inspect bindings to hold current pod status. Includes test to validate on pod status and added test to check no or few pods are pruned,if the pods are in exited state. Signed-off-by: Sujil02 <sushah@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 22:07:43 +0000