summaryrefslogtreecommitdiff
path: root/libpod/runtime.go
Commit message (Collapse)AuthorAge
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch references from libpod.conf to containers.confDaniel J Walsh2020-07-20
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for overlay volume mounts in podman.Qi Wang2020-07-20
| | | | | | | | Add support -v for overlay volume mounts in podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Qi Wang <qiwan@redhat.com>
* Remove all instances of named return "err" from LibpodMatthew Heon2020-07-09
| | | | | | | | | | | | | | | | | This was inspired by https://github.com/cri-o/cri-o/pull/3934 and much of the logic for it is contained there. However, in brief, a named return called "err" can cause lots of code confusion and encourages using the wrong err variable in defer statements, which can make them work incorrectly. Using a separate name which is not used elsewhere makes it very clear what the defer should be doing. As part of this, remove a large number of named returns that were not used anywhere. Most of them were once needed, but are no longer necessary after previous refactors (but were accidentally retained). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Turn on More lintersDaniel J Walsh2020-06-15
| | | | | | | | | - misspell - prealloc - unparam - nakedret Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* compat handlers: add X-Registry-Auth header supportValentin Rothberg2020-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Support the `X-Registry-Auth` http-request header. * The content of the header is a base64 encoded JSON payload which can either be a single auth config or a map of auth configs (user+pw or token) with the corresponding registries being the keys. Vanilla Docker, projectatomic Docker and the bindings are transparantly supported. * Add a hidden `--registries-conf` flag. Buildah exposes the same flag, mostly for testing purposes. * Do all credential parsing in the client (i.e., `cmd/podman`) pass the username and password in the backend instead of unparsed credentials. * Add a `pkg/auth` which handles most of the heavy lifting. * Go through the authentication-handling code of most commands, bindings and endpoints. Migrate them to the new code and fix issues as seen. A final evaluation and more tests is still required *after* this change. * The manifest-push endpoint is missing certain parameters and should use the ABI function instead. Adding auth-support isn't really possible without these parts working. * The container commands and endpoints (i.e., create and run) have not been changed yet. The APIs don't yet account for the authfile. * Add authentication tests to `pkg/bindings`. Fixes: #6384 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix handling of overridden paths from databaseDaniel J Walsh2020-05-08
| | | | | | | | | | | | | | If the first time you run podman in a user account you do a su - USER, and the second time, you run as the logged in USER podman fails, because it is not handling the tmpdir definition in the database. This PR fixes this problem. vendor containers/common v0.11.1 This should fix a couple of issues we have seen in podman 1.9.1 with handling of libpod.conf. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* manifest create,add,inspectQi Wang2020-04-22
| | | | | | Implememts manifest subcommands create, add, inspect. Signed-off-by: Qi Wang <qiwan@redhat.com>
* Merge pull request #5690 from rhatdan/selinuxOpenShift Merge Robot2020-04-16
|\ | | | | Add support for selecting kvm and systemd labels
| * Add support for selecting kvm and systemd labelsDaniel J Walsh2020-04-15
| | | | | | | | | | | | | | | | | | | | | | | | In order to better support kata containers and systemd containers container-selinux has added new types. Podman should execute the container with an SELinux process label to match the container type. Traditional Container process : container_t KVM Container Process: containre_kvm_t PID 1 Init process: container_init_t Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Fix up SELinux labelingDaniel J Walsh2020-04-15
|/ | | | | | SELinux label options processing fixes, should allow system tests to pass. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* refactor infoBrent Baude2020-04-06
| | | | | | the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for containers.confDaniel J Walsh2020-03-27
| | | | | | | vendor in c/common config pkg for containers.conf Signed-off-by: Qi Wang qiwan@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* make lint: enable gocriticValentin Rothberg2020-01-13
| | | | | | | `gocritic` is a powerful linter that helps in preventing certain kinds of errors as well as enforcing a coding style. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* fix lint - drop else blockValentin Rothberg2020-01-08
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* runtime.go: show registries data and search tableJosé Guilherme Vanz2019-12-13
| | | | | | | Update podman info command to show the registries data and the search table. Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
* runtime.go: show search table in podman infoJosé Guilherme Vanz2019-12-12
| | | | | | | Updates the podman info command to show registries from v1 config file in the search table format. Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
* podman: mirror informationJosé Guilherme Vanz2019-12-12
| | | | | | | | Updates the podman info command to show the mirror information Issue https://github.com/containers/libpod/issues/4553 Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
* Ensure volumes reacquire locks on state refreshMatthew Heon2019-12-02
| | | | | | | | | | | | | | | | | | | | | | | | After a restart, pods and containers both run a refresh() function to prepare to run after a reboot. Until now, volumes have not had a similar function, because they had no per-boot setup to perform. Unfortunately, this was not noticed when in-memory locking was introduced to volumes. The refresh() routine is, among other things, responsible for ensuring that locks are reserved after a reboot, ensuring they cannot be taken by a freshly-created container, pod, or volume. If this reservation is not done, we can end up with two objects using the same lock, potentially needing to lock each other for some operations - classic recipe for deadlocks. Add a refresh() function to volumes to perform lock reservation and ensure it is called as part of overall refresh(). Fixes #4605 Fixes #4621 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* add libpod/configValentin Rothberg2019-10-31
| | | | | | | | | | | | Refactor the `RuntimeConfig` along with related code from libpod into libpod/config. Note that this is a first step of consolidating code into more coherent packages to make the code more maintainable and less prone to regressions on the long runs. Some libpod definitions were moved to `libpod/define` to resolve circular dependencies. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* bump containers/image to v5.0.0, buildah to v1.11.4Nalin Dahyabhai2019-10-29
| | | | | | | | | Move to containers/image v5 and containers/buildah to v1.11.4. Replace an equality check with a type assertion when checking for a docker.ErrUnauthorizedForCredentials in `podman login`. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* Merge pull request #3792 from haircommander/minimum-conmonOpenShift Merge Robot2019-10-29
|\ | | | | require conmon v2.0.1
| * require conmon v2.0.1Peter Hunt2019-10-28
| | | | | | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
| * require conmon v2.0.0Peter Hunt2019-10-28
| | | | | | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | Merge pull request #4228 from giuseppe/detect-no-systemd-sessionOpenShift Merge Robot2019-10-24
|\ \ | | | | | | rootless: detect no system session with --cgroup-manager=systemd
| * | rootless: detect no system session with --cgroup-manager=systemdGiuseppe Scrivano2019-10-23
| |/ | | | | | | | | | | | | if the cgroup manager is set to systemd, detect if dbus is available, otherwise fallback to --cgroup-manager=cgroupfs. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #4309 from giuseppe/write-storage-overridesOpenShift Merge Robot2019-10-21
|\ \ | |/ |/| rootless: write storage overrides to the conf file
| * rootless: write storage overrides to the conf fileGiuseppe Scrivano2019-10-21
| | | | | | | | | | | | | | | | | | make sure the user overrides are stored in the configuration file when first created. Closes: https://github.com/containers/libpod/issues/2659 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | rootless: do not enable lingering modeGiuseppe Scrivano2019-10-17
|/ | | | | | | | do not automatically enable lingering mode. Closes: https://github.com/containers/libpod/issues/4224 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #4220 from mheon/null_runtimeOpenShift Merge Robot2019-10-11
|\ | | | | Move OCI runtime implementation behind an interface
| * Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | | | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Migrate can move containers to a new runtimeMatthew Heon2019-10-10
|/ | | | | | | | | | | | This is a horrible hack to work around issues with Fedora 31, but other distros might need it to, so we'll move it upstream. I do not recommend this functionality for general use, and the manpages and other documentation will reflect this. But for some upgrade cases, it will be the only thing that allows for a working system. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Update c/image to v4.0.1 and buildah to 1.11.3Miloslav Trmač2019-10-04
| | | | | | | | | | | | | | This requires updating all import paths throughout, and a matching buildah update to interoperate. I can't figure out the reason for go.mod tracking github.com/containers/image v3.0.2+incompatible // indirect ((go mod graph) lists it as a direct dependency of libpod, but (go list -json -m all) lists it as an indirect dependency), but at least looking at the vendor subdirectory, it doesn't seem to be actually used in the built binaries. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* rootless: set DBUS_SESSION_BUS_ADDRESS if it is not setGiuseppe Scrivano2019-10-02
| | | | | | | | | | if the variable is not set, make sure it has a sane value so that go-dbus won't try to connect to the wrong user session. Closes: https://github.com/containers/libpod/issues/4162 Closes: https://github.com/containers/libpod/issues/4164 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* We need to convert libpod.conf files in user homedir for cgroupv2Daniel J Walsh2019-09-21
| | | | | | | | | | | If a user upgrades to a machine that defaults to a cgroups V2 machine and has a libpod.conf file in their homedir that defaults to OCI Runtime runc, then we want to change it one time to crun. runc as of this point does not work on cgroupV2 systems. This patch will eventually be removed but is needed until runc has support. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* fix trivial type for event loggerbaude2019-09-19
| | | | | | Fixes: #4062 Signed-off-by: baude <bbaude@redhat.com>
* Add support for launching containers without CGroupsMatthew Heon2019-09-10
| | | | | | | This is mostly used with Systemd, which really wants to manage CGroups itself when managing containers via unit file. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Ensure good defaults on blank c/storage configurationMatthew Heon2019-09-05
| | | | | | | | | | | | | | | | If c/storage paths are explicitly set to "" (the empty string) it will use compiled-in defaults. However, it won't tell us this via `storage.GetDefaultStoreOptions()` - we just get the empty string (which can put our defaults, some of which are relative to c/storage, in a bad spot). Hardcode a sane default for cases like this. Furthermore, add some sanity checks to paths, to ensure we don't use relative paths for core parts of libpod. Fixes #3952 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add an integration test for systemd in a containerMatthew Heon2019-08-28
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2940 from giuseppe/drop-firewallOpenShift Merge Robot2019-08-21
|\ | | | | networking: use firewall plugin
| * networking: use firewall pluginGiuseppe Scrivano2019-08-19
| | | | | | | | | | | | | | drop the pkg/firewall module and start using the firewall CNI plugin. It requires an updated package for CNI plugins. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #3760 from rhatdan/authOpenShift Merge Robot2019-08-19
|\ \ | |/ |/| Use GetRuntimeDir to setup auth.json for login
| * Use GetRuntimeDir to setup auth.json for loginDaniel J Walsh2019-08-12
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | do not activate sd_notify support when varlinkbaude2019-08-15
|/ | | | | | | | | add ability to not activate sd_notify when running under varlink as it causes deadlocks and hangs. Fixes: #3572 Signed-off-by: baude <bbaude@redhat.com>
* rootless: cherry-pick runtime from the system configurationGiuseppe Scrivano2019-08-12
| | | | | | | | | when creating the default libpod.conf file, be sure the default OCI runtime is cherry picked from the system configuration. Closes: https://github.com/containers/libpod/issues/3781 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add conmon probe to runtime constructionPeter Hunt2019-08-08
| | | | | | Now, when a user's conmon is out of date, podman will tell them Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Merge pull request #3466 from TomSweeneyRedHat/dev/tsweeney/myhomeOpenShift Merge Robot2019-08-06
|\ | | | | Touch up XDG, add rootless links
| * Touch up XDG, add rootless linksTomSweeneyRedHat2019-07-29
| | | | | | | | | | | | | | | | | | | | | | Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number of man pages. Make use of the XDG_CONFIG_HOME environment variable in a rootless environment if available, or set it if not. Also added a number of links to the Rootless Podman config page and added the location of the auth.json files to that doc. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | honor libpod.conf in /usr/share/containersbaude2019-08-04
| | | | | | | | | | | | | | | | | | | | | | we should be looking for the libpod.conf file in /usr/share/containers and not in /usr/local. packages of podman should drop the default libpod.conf in /usr/share. the override remains /etc/containers/ as well. Fixes: #3702 Signed-off-by: baude <bbaude@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-05 16:24:02 +0000