| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The rootless integration tests show the XDG_RUNTIME_DIR warning without
any reasons. Podman runs without problems in these and yet the warning
is shown. I think the problem is that we check the permission before we
create the runroot directory.
[NO TESTS NEEDED]
Fixes #11521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
| |
[NO TESTS NEEDED]
Signed-off-by: Aditya Rajan <flouthoc.git@gmail.com>
|
| |
|
|
|
|
|
|
| |
* Include OCI and conmon information as components
Fixes #11227
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
|
| |
not present.
[NO TESTS NEEDED]
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
We should not be exposing the store outside of Libpod. We want to
encapsulate it as an internal implementation detail - there's no
reason functions outside of Libpod should directly be
manipulating container storage. Convert the last use to invoke a
method on Libpod instead, and remove the function.
[NO TESTS NEEDED] as this is just a refactor.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pull the trigger on the `pkg/registries` package which acted as a proxy
for `c/image/pkg/sysregistriesv2`. Callers should be using the packages
from c/image directly, if needed at all.
Also make use of libimage's SystemContext() method which returns a copy
of a system context, further reducing the risk of unintentionally
altering global data.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman does not need to watch the cni config directory. If a network is
not found in the cache, OCICNI will reload the networks anyway and thus
even podman system service should work as expected.
Also include a change to not mount a "new" /var by default in the
rootless cni ns, instead try to use /var/lib/cni first and then the
parent dir. This allows users to store cni configs under /var/... which
is the case for the CI compose test.
[NO TESTS NEEDED]
Fixes #10686
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Users are complaining about read/only /var/tmp failing
even if TMPDIR=/tmp is set.
This PR Fixes: https://github.com/containers/podman/issues/10698
[NO TESTS NEEDED] No way to test this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
| |
libimage now supports events which `libpod.Runtime` now uses for image
events.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
| |
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
| |
2.0.24 introduced the new behavior with --full-attach, allowing podman to no longer use the socketDir
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
| |
I believe moving the conmon probing code to c/common wasn't the best strategy.
Different container engines have different requrements of which conmon version is required
(based on what flags they use).
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |\
| |
| | |
Fix message about runtime to show only the actual runtime
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently the debug line shows every runtime up until it finds
the correct one, confusing users on which runtime it is using.
Also move missing OCI runtime from containers/conf down to Debug level
and improved the debug message, to not report error.
[NO TESTS NEEDED] Since this is just debug.
Triggered by https://github.com/containers/podman/issues/4854
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We originally added this in the *very early* days of Podman,
before a proper persistent state was written, so we had something
to test with. It was retained after the original SQLite state
(and current BoltDB state) were written so it could be used for
testing Libpod in unit tests with no requirement for on-disk
storage. Well, such unit tests never materialized, and if we were
to write some now the requirement to have a temporary directory
for storing data on disk is not that bad. I can basically
guarantee there are no users of this in the wild because, even if
you managed to figure out how to configure it when we don't
document it, it's completely unusable with Podman since all your
containers and pods will disappear every time Podman exits.
Given all this, and since it's an ongoing maintenance burden I no
longer wish to deal with, let's just remove it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
Use the whitespace linter and fix the reported problems.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was a potential race where two handlers could be added at
the same time. Go Maps are not thread-safe, so that could do
unpleasant things. Add a mutex to keep things safe.
Also, swap the order or Register and Start for the handlers in
Libpod runtime created. As written, there was a small gap between
Start and Register where SIGTERM/SIGINT would be completely
ignored, instead of stopping Podman. Swapping the two closes this
gap.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes #4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Installing a duplicate shutdown handler fails, but if a handler
with the same name is already present, we should be set to go.
There's no reason to print a user-facing error about it.
This comes up almost nowhere because Podman never makes more than
one Libpod runtime, but there is one exception (`system reset`)
and the error messages, while harmless, were making people very
confused (we got several bug reports that `system reset` was
nonfunctional).
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our users are missing certain warning messages that would
make debugging issues with Podman easier.
For example if you do a podman build with a Containerfile
that contains the SHELL directive, the Derective is silently
ignored.
If you run with the log-level warn you get a warning message explainging
what happened.
$ podman build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
--> 7a207be102a
7a207be102aa8993eceb32802e6ceb9d2603ceed9dee0fee341df63e6300882e
$ podman --log-level=warn build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
WARN[0000] SHELL is not supported for OCI image format, [/bin/bash -c] will be ignored. Must use `docker` format
--> 7bd96fd25b9
7bd96fd25b9f755d8a045e31187e406cf889dcf3799357ec906e90767613e95f
These messages will no longer be lost, when we default to WARNing level.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we always computed pause path from the Rootless
runtime directory. Problem: this does not match the behavior of
Libpod when the directory changes. Libpod will continue to use
the previous directory, cached in the database; Pause pidfiles
will swap to the new path. This is problematic when the directory
needs to exist to write the pidfile, and Libpod is what creates
the directory.
There are two potential solutions - allow the pause pidfile to
move and just make the directory when we want to write it, or use
the cached Libpod paths for a guaranteed location. This patch
does the second, because it seems safer - we will never miss a
previously-existing pidfile because the location is now
consistent.
Fixes #8539
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
| |
regression introduced when moving to Podman 2.0.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1877228
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |\
| |
| | |
Fix missing OCI Runtime
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Say I start a container with the flag
`--runtime /usr/local/sbin/crun`. I then stop the container, and
restart it without the flag. We previously stored the runtime in
use by a container only by basename when given a path, so the
container only knows that it's using the `crun` OCI runtime - and
on being restarted without the flag, it will use the system crun,
not my special crun build.
Using the full path as the name in these cases ensures we will
still use the correct runtime, even on subsequent runs of Podman.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This allows us to run both the Libpod and Server handlers at the
same time without unregistering one.
Also, pass the signal that killed us into the handlers, in case
they want to use it to determine what to do (e.g. what exit code
to set).
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Expand the use of the Shutdown package such that we now use it
to handle signals any time we run Libpod. From there, add code to
container creation to use the Inhibit function to prevent a
shutdown from occuring during the critical parts of container
creation.
We also need to turn off signal handling when --sig-proxy is
invoked - we don't want to catch the signals ourselves then, but
instead to forward them into the container via the existing
sig-proxy handler.
Fixes #7941
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like
fails, the error message already contains the file name and the
operation that fails, so there is no need to wrap the error with
something like "open %s failed".
While at it
- replace a few places with os.Open, ioutil.ReadAll with
ioutil.ReadFile.
- replace errors.Wrapf with errors.Wrap for cases where there
are no %-style arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
|
| |
|
|
|
|
| |
Add global options --runtime-flags for setting options to container runtime.
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |
|
|
|
|
| |
Support podman service sighup reload configuration files(containers.conf, registries.conf, storage.conf).
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes #7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
Add support -v for overlay volume mounts in podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
- misspell
- prealloc
- unparam
- nakedret
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the first time you run podman in a user account you do a
su - USER, and the second time, you run as the logged in USER
podman fails, because it is not handling the tmpdir definition
in the database. This PR fixes this problem.
vendor containers/common v0.11.1
This should fix a couple of issues we have seen in podman 1.9.1
with handling of libpod.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
| |
Implememts manifest subcommands create, add, inspect.
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |\
| |
| | |
Add support for selecting kvm and systemd labels
|
