| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can easily tell if we're going to deadlock by comparing lock
IDs before actually taking the lock. Add a few checks for this in
common places where deadlocks might occur.
This does not yet cover pod operations, where detection is more
difficult (and costly) due to the number of locks being involved
being higher than 2.
Also, add some error wrapping on the Podman side, so we can tell
people to use `system renumber` when it occurs.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In Podman 1.6.3, we added support for anonymous volumes - fixing
our old, broken support for named volumes that were created with
containers. Unfortunately, this reused the database field we used
for the old implementation, and toggled volume removal on for
`podman run --rm` - so now, we were removing *named* volumes
created with older versions of Podman.
We can't modify these old volumes in the DB, so the next-safest
thing to do is swap to a new field to indicate volumes should be
removed. Problem: Volumes created with 1.6.3 and up until this
lands, even anonymous volumes, will not be removed. However, this
is safer than removing too many volumes, as we were doing before.
Fixes #5009
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
Add API review comments to correct documentation and endpoints. Also, add a libpode prune method to reduce code duplication. Only used right now for the API but when the remote client is wired, we will switch over there too.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
| |
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The pod name does not appear when doing `podman ps -p`.
It is missing as the documentation says:
-p, --pod Print the ID and name of the pod the containers are associated with
The pod name is added in the ps output and checked in unit tests.
Closes #4703
Signed-off-by: NevilleC <neville.cain@qonto.eu>
|
| |\
| |
| | |
if container is not in a pid namespace, stop all processes
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
When a container is in a PID namespace, it is enought to send
the stop signal to the PID 1 of the namespace, only send signals
to all processes in the container when the container is not in
a pid namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When trying to reproduce #4704 I noticed that the named volumes
from the Postgres containers in the reproducer weren't being
removed by `podman pod rm -f` saying that the container they were
attached to was still in use. This was rather odd, considering
they were only in use by one container, and that container was in
the process of being removed with the pod.
After a bit of tracing, I realized that the cause is the ordering
of container removal when we remove a pod. Normally, it's done
in removeContainer() before volume removal (which is the last
thing in that function). However, when we are removing a pod, we
remove containers all at once, after removeContainer has already
finished - meaning the container still exists when we try to
remove its volumes, and thus the volume can't be removed.
Solution: collect a list of all named volumes in use by the pod,
and remove them all at once after every container in the pod is
gone. This ensures that there are no dependency issues.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When Libpod removes a container, there is the possibility that
removal will not fully succeed. The most notable problems are
storage issues, where the container cannot be removed from
c/storage.
When this occurs, we were faced with a choice. We can keep the
container in the state, appearing in `podman ps` and available for
other API operations, but likely unable to do any of them as it's
been partially removed. Or we can remove it very early and clean
up after it's already gone. We have, until now, used the second
approach.
The problem that arises is intermittent problems removing
storage. We end up removing a container, failing to remove its
storage, and ending up with a container permanently stuck in
c/storage that we can't remove with the normal Podman CLI, can't
use the name of, and generally can't interact with. A notable
cause is when Podman is hit by a SIGKILL midway through removal,
which can consistently cause `podman rm` to fail to remove
storage.
We now add a new state for containers that are in the process of
being removed, ContainerStateRemoving. We set this at the
beginning of the removal process. It notifies Podman that the
container cannot be used anymore, but preserves it in the DB
until it is fully removed. This will allow Remove to be run on
these containers again, which should successfully remove storage
if it fails.
Fixes #3906
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, when `podman run` encountered a volume mount without
separate source and destination (e.g. `-v /run`) we would assume
that both were the same - a bind mount of `/run` on the host to
`/run` in the container. However, this does not match Docker's
behavior - in Docker, this makes an anonymous named volume that
will be mounted at `/run`.
We already have (more limited) support for these anonymous
volumes in the form of image volumes. Extend this support to
allow it to be used with user-created volumes coming in from the
`-v` flag.
This change also affects how named volumes created by the
container but given names are treated by `podman run --rm` and
`podman rm -v`. Previously, they would be removed with the
container in these cases, but this did not match Docker's
behaviour. Docker only removed anonymous volumes. With this patch
we move to that model as well; `podman run -v testvol:/test` will
not have `testvol` survive the container being removed by `podman
rm -v`.
The sum total of these changes let us turn on volume removal in
`--rm` by default.
Fixes: #4276
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, `podman checkport restore` with exported containers,
when told to create a new container based on the exported
checkpoint, would create a new container, with a new container
ID, but not reset CGroup path - which contained the ID of the
original container.
If this was done multiple times, the result was two containers
with the same cgroup paths. Operations on these containers would
this have a chance of crossing over to affect the other one; the
most notable was `podman rm` once it was changed to use the --all
flag when stopping the container; all processes in the cgroup,
including the ones in the other container, would be stopped.
Reset cgroups on restore to ensure that the path matches the ID
of the container actually being run.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
This ensures that containers that didn't require an evict will be
dealt with normally, and we only break out evict for containers
that refuse to be removed by normal means.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
Add ability to evict a container when it becomes unusable. This may
happen when the host setup changes after a container creation, making it
impossible for that container to be used or removed.
Evicting a container is done using the `rm --force` command.
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
|
| |\
| |
| | |
Support running containers without CGroups
|
| | |
| |
| |
| |
| |
| |
| | |
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |/
|
|
|
|
|
|
|
|
|
| |
Previously, we only did this for volumes created at the same time
as the container. However, this is not correct behavior - Docker
does so for all named volumes, even those made with
'podman volume create' and mounted into a container later.
Fixes #3945
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
| |
This will require a 'podman system renumber' after being applied
to get lock numbers for existing volumes.
Add the DB backend code for rewriting volume configs and use it
for updating lock numbers as part of 'system renumber'.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After restoring a container with a different name (ID) the ConmonPidFile
was still pointing to the path of the original container.
This means that the last restored container will overwrite the
ConmonPidFile of the original container. It was also not possible to
restore a container with a new name (ID) if the original container was
not running.
The ConmonPidFile is only changed if the ConmonPidFile starts with the
value of RunRoot. This assumes that if RunRoot is part of ConmonPidFile
the user did not specify --conmon-pidfile' during run or create.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
A container restored from an exported checkpoint did not have its
StartedTime set. Which resulted in a status like 'Up 292 years ago'
after the restore.
This just sets the StartedTime to time.Now() if a container is restored
from an exported checkpoint.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When forcibly removing a container, we are initiating an explicit
stop of the container, which is not reflected in 'podman events'.
Swap to using our standard 'stop()' function instead of a custom
one for force-remove, and move the event into the internal stop
function (so internal calls also register it).
This does add one more database save() to `podman remove`. This
should not be a terribly serious performance hit, and does have
the desirable side effect of making things generally safer.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
| |
this is the third round of preparing to use the golangci-lint on our
code base.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Using pod removal worked, but container removal was missing the
most critical step - the actual removal. Must have been
accidentally removed during a refactor.
Fixes #3556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
fix a regression introduced by 1d36501f961889f554daf3c696fe95443ef211b6
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |\
| |
| | |
Use conmon pidfile in generated systemd unit as PIDFile.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The conmon pidfile is crucial for podman-generated systemd units, because
these units rely on it for determining service's main process ID.
With this change, every container has ConmonPidFile set (at least to
default value).
Signed-off-by: Danila Kiver <danila.kiver@mail.ru>
|
| |\ \
| | |
| | | |
Set correct SELinux label on restored containers
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Instead of only tracking that a container is restored from
a checkpoint locally in runtime_ctr.go this adds a flag to the
Container structure.
Upcoming patches to correctly label the root file-system mount-point
need also to know if a container is restored from a checkpoint.
Instead of passing a parameter around a lot of functions, this
adds that information to the Container structure.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| | |/
|/|
| |
| |
| |
| | |
clean up code identified as problematic by golands inspection
Signed-off-by: baude <bbaude@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
If we don't do this, we can leak locks on every failure, and that
is very, very bad - can render Podman unusable without a 'system
renumber' being run.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| | |
| |
| |
| |
| |
| | |
this is phase 2 for the removal of libpod from main.
Signed-off-by: baude <bbaude@redhat.com>
|
| | |
| |
| |
| | |
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
| |
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
| |
Use name of the default runtime, instead of the OCIRuntime config
option, which may include a full path.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This flag switches to removing containers directly from c/storage
and is mostly used to remove orphan containers.
It's a superior solution to our former one, which attempted
removal from storage under certain circumstances and could, under
some conditions, not trigger.
Also contains the beginning of support for storage in `ps` but
wiring that in is going to be a much bigger pain.
Fixes #3329.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The option to restore a container from an external checkpoint archive
(podman container restore -i /tmp/checkpoint.tar.gz) restores a
container with the same name and same ID as id had before checkpointing.
This commit adds the option '--name,-n' to 'podman container restore'.
With this option the restored container gets the name specified after
'--name,-n' and a new ID. This way it is possible to restore one
container multiple times.
If a container is restored with a new name Podman will not try to
request the same IP address for the container as it had during
checkpointing. This implicitly assumes that if a container is restored
from a checkpoint archive with a different name, that it will be
restored multiple times and restoring a container multiple times with
the same IP address will fail as each IP address can only be used once.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds an option to the checkpoint command to export a
checkpoint into a tar.gz file as well as importing a checkpoint tar.gz
file during restore. With all checkpoint artifacts in one file it is
possible to easily transfer a checkpoint and thus enabling container
migration in Podman. With the following steps it is possible to migrate
a running container from one system (source) to another (destination).
Source system:
* podman container checkpoint -l -e /tmp/checkpoint.tar.gz
* scp /tmp/checkpoint.tar.gz destination:/tmp
Destination system:
* podman pull 'container-image-as-on-source-system'
* podman container restore -i /tmp/checkpoint.tar.gz
The exported tar.gz file contains the checkpoint image as created by
CRIU and a few additional JSON files describing the state of the
checkpointed container.
Now the container is running on the destination system with the same
state just as during checkpointing. If the container is kept running
on the source system with the checkpoint flag '-R', the result will be
that the same container is running on two different hosts.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |\
| |
| | |
Add libpod journald logging
|
| | |
| |
| |
| | |
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| | |
| |
| |
| | |
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |/
|
|
|
|
|
|
|
| |
since we now enter the user namespace prior to read the conmon.pid, we
can write the conmon.pid file again to the runtime dir.
This reverts commit 6c6a8654363457a9638d58265d0a7e8743575d7a.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
Instead of rewriting the logic, reuse the standard logic we use
for removing containers, which is much better tested.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |\
| |
| | |
Use GetContainer instead of LookupContainer for full ID
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
All IDs in libpod are stored as a full container ID. We can get a
container by full ID faster with GetContainer (which directly
retrieves) than LookupContainer (which finds a match, then
retrieves). No reason to use Lookup when we have full IDs present
and available.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |/
|
|
| |
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
| |
The flag should be substantially more durable, and no longer
relies on the create artifact.
This should allow it to properly handle our new named volume
implementation.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
Now that named volumes must be explicitly enumerated rather than
passed in with all other volumes, we need to split normal and
named volumes up before passing them into libpod. This PR does
this.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
Replaces old functionality we used for handling image volumes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
