summaryrefslogtreecommitdiff
path: root/libpod/runtime_ctr.go
Commit message (Collapse)AuthorAge
* Add support for anonymous volumes to `podman run -v`Matthew Heon2019-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, when `podman run` encountered a volume mount without separate source and destination (e.g. `-v /run`) we would assume that both were the same - a bind mount of `/run` on the host to `/run` in the container. However, this does not match Docker's behavior - in Docker, this makes an anonymous named volume that will be mounted at `/run`. We already have (more limited) support for these anonymous volumes in the form of image volumes. Extend this support to allow it to be used with user-created volumes coming in from the `-v` flag. This change also affects how named volumes created by the container but given names are treated by `podman run --rm` and `podman rm -v`. Previously, they would be removed with the container in these cases, but this did not match Docker's behaviour. Docker only removed anonymous volumes. With this patch we move to that model as well; `podman run -v testvol:/test` will not have `testvol` survive the container being removed by `podman rm -v`. The sum total of these changes let us turn on volume removal in `--rm` by default. Fixes: #4276 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* When restoring containers, reset cgroup pathMatthew Heon2019-10-10
| | | | | | | | | | | | | | | | | | | | Previously, `podman checkport restore` with exported containers, when told to create a new container based on the exported checkpoint, would create a new container, with a new container ID, but not reset CGroup path - which contained the ID of the original container. If this was done multiple times, the result was two containers with the same cgroup paths. Operations on these containers would this have a chance of crossing over to affect the other one; the most notable was `podman rm` once it was changed to use the --all flag when stopping the container; all processes in the cgroup, including the ones in the other container, would be stopped. Reset cgroups on restore to ensure that the path matches the ID of the container actually being run. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* When evicting containers, perform a normal remove firstMatthew Heon2019-10-04
| | | | | | | | This ensures that containers that didn't require an evict will be dealt with normally, and we only break out evict for containers that refuse to be removed by normal means. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rm: add containers eviction with `rm --force`Marco Vedovati2019-09-25
| | | | | | | | | Add ability to evict a container when it becomes unusable. This may happen when the host setup changes after a container creation, making it impossible for that container to be used or removed. Evicting a container is done using the `rm --force` command. Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* Merge pull request #3581 from mheon/no_cgroupsOpenShift Merge Robot2019-09-11
|\ | | | | Support running containers without CGroups
| * Add support for launching containers without CGroupsMatthew Heon2019-09-10
| | | | | | | | | | | | | | This is mostly used with Systemd, which really wants to manage CGroups itself when managing containers via unit file. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | When first mounting any named volume, copy upMatthew Heon2019-09-09
|/ | | | | | | | | | | Previously, we only did this for volumes created at the same time as the container. However, this is not correct behavior - Docker does so for all named volumes, even those made with 'podman volume create' and mounted into a container later. Fixes #3945 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Re-add locks to volumes.Matthew Heon2019-08-28
| | | | | | | | | | This will require a 'podman system renumber' after being applied to get lock numbers for existing volumes. Add the DB backend code for rewriting volume configs and use it for updating lock numbers as part of 'system renumber'. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix up ConmonPidFile after restoreAdrian Reber2019-08-09
| | | | | | | | | | | | | | | | After restoring a container with a different name (ID) the ConmonPidFile was still pointing to the path of the original container. This means that the last restored container will overwrite the ConmonPidFile of the original container. It was also not possible to restore a container with a new name (ID) if the original container was not running. The ConmonPidFile is only changed if the ConmonPidFile starts with the value of RunRoot. This assumes that if RunRoot is part of ConmonPidFile the user did not specify --conmon-pidfile' during run or create. Signed-off-by: Adrian Reber <areber@redhat.com>
* restore: correctly set StartedTimeAdrian Reber2019-08-05
| | | | | | | | | | | A container restored from an exported checkpoint did not have its StartedTime set. Which resulted in a status like 'Up 292 years ago' after the restore. This just sets the StartedTime to time.Now() if a container is restored from an exported checkpoint. Signed-off-by: Adrian Reber <areber@redhat.com>
* Ensure we generate a 'stopped' event on force-removeMatthew Heon2019-07-31
| | | | | | | | | | | | | | When forcibly removing a container, we are initiating an explicit stop of the container, which is not reflected in 'podman events'. Swap to using our standard 'stop()' function instead of a custom one for force-remove, and move the event into the internal stop function (so internal calls also register it). This does add one more database save() to `podman remove`. This should not be a terribly serious performance hit, and does have the desirable side effect of making things generally safer. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* golangci-lint round #3baude2019-07-21
| | | | | | | this is the third round of preparing to use the golangci-lint on our code base. Signed-off-by: baude <bbaude@redhat.com>
* Fix a bug where ctrs could not be removed from podsMatthew Heon2019-07-11
| | | | | | | | | | Using pod removal worked, but container removal was missing the most critical step - the actual removal. Must have been accidentally removed during a refactor. Fixes #3556 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* runtime: drop spurious message logGiuseppe Scrivano2019-07-10
| | | | | | fix a regression introduced by 1d36501f961889f554daf3c696fe95443ef211b6 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #3497 from QazerLab/bugfix/systemd-generate-pidfileOpenShift Merge Robot2019-07-08
|\ | | | | Use conmon pidfile in generated systemd unit as PIDFile.
| * Use default conmon pidfile location for root containers.Danila Kiver2019-07-04
| | | | | | | | | | | | | | | | | | | | The conmon pidfile is crucial for podman-generated systemd units, because these units rely on it for determining service's main process ID. With this change, every container has ConmonPidFile set (at least to default value). Signed-off-by: Danila Kiver <danila.kiver@mail.ru>
* | Merge pull request #3425 from adrianreber/restore-mount-labelOpenShift Merge Robot2019-07-08
|\ \ | | | | | | Set correct SELinux label on restored containers
| * | Track if a container is restored from an exported checkpointAdrian Reber2019-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of only tracking that a container is restored from a checkpoint locally in runtime_ctr.go this adds a flag to the Container structure. Upcoming patches to correctly label the root file-system mount-point need also to know if a container is restored from a checkpoint. Instead of passing a parameter around a lot of functions, this adds that information to the Container structure. Signed-off-by: Adrian Reber <areber@redhat.com>
* | | code cleanupbaude2019-07-08
| |/ |/| | | | | | | | | clean up code identified as problematic by golands inspection Signed-off-by: baude <bbaude@redhat.com>
* | Ensure locks are freed when ctr/pod creation failsMatthew Heon2019-07-02
| | | | | | | | | | | | | | | | If we don't do this, we can leak locks on every failure, and that is very, very bad - can render Podman unusable without a 'system renumber' being run. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | libpod removal from main (phase 2)baude2019-06-27
| | | | | | | | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* | stats: fix cgroup path for rootless containersGiuseppe Scrivano2019-06-26
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | remove libpod from mainbaude2019-06-25
|/ | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Properly initialize container OCI runtimeMatthew Heon2019-06-20
| | | | | | | Use name of the default runtime, instead of the OCIRuntime config option, which may include a full path. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Begin adding support for multiple OCI runtimesMatthew Heon2019-06-19
| | | | | | | | | | | | | Allow Podman containers to request to use a specific OCI runtime if multiple runtimes are configured. This is the first step to properly supporting containers in a multi-runtime environment. The biggest changes are that all OCI runtimes are now initialized when Podman creates its runtime, and containers now use the runtime requested in their configuration (instead of always the default runtime). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add --storage flag to 'podman rm' (local only)Matthew Heon2019-06-13
| | | | | | | | | | | | | | | | This flag switches to removing containers directly from c/storage and is mostly used to remove orphan containers. It's a superior solution to our former one, which attempted removal from storage under certain circumstances and could, under some conditions, not trigger. Also contains the beginning of support for storage in `ps` but wiring that in is going to be a much bigger pain. Fixes #3329. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* migration: add possibility to restore a container with a new nameAdrian Reber2019-06-04
| | | | | | | | | | | | | | | | | | | | The option to restore a container from an external checkpoint archive (podman container restore -i /tmp/checkpoint.tar.gz) restores a container with the same name and same ID as id had before checkpointing. This commit adds the option '--name,-n' to 'podman container restore'. With this option the restored container gets the name specified after '--name,-n' and a new ID. This way it is possible to restore one container multiple times. If a container is restored with a new name Podman will not try to request the same IP address for the container as it had during checkpointing. This implicitly assumes that if a container is restored from a checkpoint archive with a different name, that it will be restored multiple times and restoring a container multiple times with the same IP address will fail as each IP address can only be used once. Signed-off-by: Adrian Reber <areber@redhat.com>
* Added support to migrate containersAdrian Reber2019-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds an option to the checkpoint command to export a checkpoint into a tar.gz file as well as importing a checkpoint tar.gz file during restore. With all checkpoint artifacts in one file it is possible to easily transfer a checkpoint and thus enabling container migration in Podman. With the following steps it is possible to migrate a running container from one system (source) to another (destination). Source system: * podman container checkpoint -l -e /tmp/checkpoint.tar.gz * scp /tmp/checkpoint.tar.gz destination:/tmp Destination system: * podman pull 'container-image-as-on-source-system' * podman container restore -i /tmp/checkpoint.tar.gz The exported tar.gz file contains the checkpoint image as created by CRIU and a few additional JSON files describing the state of the checkpointed container. Now the container is running on the destination system with the same state just as during checkpointing. If the container is kept running on the source system with the checkpoint flag '-R', the result will be that the same container is running on two different hosts. Signed-off-by: Adrian Reber <areber@redhat.com>
* Merge pull request #2709 from haircommander/journaldOpenShift Merge Robot2019-05-29
|\ | | | | Add libpod journald logging
| * Address commentsPeter Hunt2019-05-28
| | | | | | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
| * Added --log-driver and journald loggingPeter Hunt2019-05-28
| | | | | | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | Revert "rootless: change default path for conmon.pid"Giuseppe Scrivano2019-05-25
|/ | | | | | | | | since we now enter the user namespace prior to read the conmon.pid, we can write the conmon.pid file again to the runtime dir. This reverts commit 6c6a8654363457a9638d58265d0a7e8743575d7a. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Use standard remove functions for removing pod ctrsMatthew Heon2019-05-10
| | | | | | | Instead of rewriting the logic, reuse the standard logic we use for removing containers, which is much better tested. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2913 from mheon/get_instead_of_lookupOpenShift Merge Robot2019-04-12
|\ | | | | Use GetContainer instead of LookupContainer for full ID
| * Use GetContainer instead of LookupContainer for full IDMatthew Heon2019-04-12
| | | | | | | | | | | | | | | | | | | | All IDs in libpod are stored as a full container ID. We can get a container by full ID faster with GetContainer (which directly retrieves) than LookupContainer (which finds a match, then retrieves). No reason to use Lookup when we have full IDs present and available. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Expand debugging for container cleanup errorsMatthew Heon2019-04-11
|/ | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Major rework of --volumes-from flagMatthew Heon2019-04-04
| | | | | | | | | | The flag should be substantially more durable, and no longer relies on the create artifact. This should allow it to properly handle our new named volume implementation. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add handling for new named volumes code in pkg/specMatthew Heon2019-04-04
| | | | | | | | | Now that named volumes must be explicitly enumerated rather than passed in with all other volumes, we need to split normal and named volumes up before passing them into libpod. This PR does this. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Create non-existing named volumes at container createMatthew Heon2019-04-04
| | | | | | Replaces old functionality we used for handling image volumes. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Switch Libpod over to new explicit named volumesMatthew Heon2019-04-04
| | | | | | | | | | | | | This swaps the previous handling (parse all volume mounts on the container and look for ones that might refer to named volumes) for the new, explicit named volume lists stored per-container. It also deprecates force-removing volumes that are in use. I don't know how we want to handle this yet, but leaving containers that depend on a volume that no longer exists is definitely not correct. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rootless: use a single user namespaceGiuseppe Scrivano2019-04-01
| | | | | | | | | | | | | | | | | | | | | simplify the rootless implementation to use a single user namespace for all the running containers. This makes the rootless implementation behave more like root Podman, where each container is created in the host environment. There are multiple advantages to it: 1) much simpler implementation as there is only one namespace to join. 2) we can join namespaces owned by different containers. 3) commands like ps won't be limited to what container they can access as previously we either had access to the storage from a new namespace or access to /proc when running from the host. 4) rootless varlink works. 5) there are only two ways to enter in a namespace, either by creating a new one if no containers are running or joining the existing one from any container. Containers created by older Podman versions must be restarted. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* userns: do not use an intermediate mount namespaceGiuseppe Scrivano2019-03-29
| | | | | | | | | | | | | | We have an issue in the current implementation where the cleanup process is not able to umount the storage as it is running in a separate namespace. Simplify the implementation for user namespaces by not using an intermediate mount namespace. For doing it, we need to relax the permissions on the parent directories and allow browsing them. Containers that are running without a user namespace, will still maintain mode 0700 on their directory. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* volumes: push the chown logic to runtime_volume_linux.goGiuseppe Scrivano2019-03-29
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Remove ulele/deepcopier in favor of JSON deep copyMatthew Heon2019-03-27
| | | | | | | | | | | | | We have a very high performance JSON library that doesn't need to perform code generation. Let's use it instead of our questionably performant, reflection-dependent deep copy library. Most changes because some functions can now return errors. Also converts cmd/podman to use jsoniter, instead of pkg/json, for increased performance. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* volume: create new volumes with right ownershipGiuseppe Scrivano2019-03-21
| | | | | | | when we create a new volume we must be sure it is owned by root in the container. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* rootless: change default path for conmon.pidGiuseppe Scrivano2019-03-15
| | | | | | | | | | | | We cannot use the RunDir for writing the conmon.pid file as we might not be able to read it before we join a namespace, since it is owned by the root in the container which can be a different uid when using uidmap. To avoid completely the issue, we will just write it to the static dir which is always readable by the unprivileged user. Closes: https://github.com/containers/libpod/issues/2673 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* Only remove image volumes when removing containersMatthew Heon2019-02-26
| | | | | | | | | | | | When removing volumes with rm --volumes we want to only remove volumes that were created with the container. Volumes created separately via 'podman volume create' should not be removed. Also ensure that --rm implies volumes will be removed. Fixes #2441 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Remove locks from volumesMatthew Heon2019-02-21
| | | | | | | | | | | | | | | | | | | I was looking into why we have locks in volumes, and I'm fairly convinced they're unnecessary. We don't have a state whose accesses we need to guard with locks and syncs. The only real purpose for the lock was to prevent concurrent removal of the same volume. Looking at the code, concurrent removal ought to be fine with a bit of reordering - one or the other might fail, but we will successfully evict the volume from the state. Also, remove the 'prune' bool from RemoveVolume. None of our other API functions accept it, and it only served to toggle off more verbose error messages. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-10-04 12:23:46 +0000