aboutsummaryrefslogtreecommitdiff
path: root/libpod/runtime_volume.go
Commit message (Collapse)AuthorAge
* libpod/runtime: switch to golang native error wrappingSascha Grunert2022-07-04
| | | | | | | | | We now use the golang error wrapping format specifier `%w` instead of the deprecated github.com/pkg/errors package. [NO NEW TESTS NEEDED] Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
* add podman volume reload to sync volume pluginsPaul Holzinger2022-06-23
| | | | | | | | | | | | | | | | | | | Libpod requires that all volumes are stored in the libpod db. Because volume plugins can be created outside of podman, it will not show all available plugins. This podman volume reload command allows users to sync the libpod db with their external volume plugins. All new volumes from the plugin are also created in the libpod db and when a volume from the db no longer exists it will be removed if possible. There are some problems: - naming conflicts, in this case we only use the first volume we found. This is not deterministic. - race conditions, we have no control over the volume plugins. It is possible that the volumes changed while we run this command. Fixes #14207 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Remove the runtime lockMatthew Heon2022-02-22
| | | | | | | | | | | | | | | | This primarily served to protect us against shutting down the Libpod runtime while operations (like creating a container) were happening. However, it was very inconsistently implemented (a lot of our longer-lived functions, like pulling images, just didn't implement it at all...) and I'm not sure how much we really care about this very-specific error case? Removing it also removes a lot of potential deadlocks, which is nice. [NO NEW TESTS NEEDED] Signed-off-by: Matthew Heon <mheon@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add --time out for podman * rm -f commandsDaniel J Walsh2021-10-04
| | | | | | | | | Add --time flag to podman container rm Add --time flag to podman pod rm Add --time flag to podman volume rm Add --time flag to podman network rm Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Rework pruning to report reclaimed spaceBaron Lenardson2020-12-30
| | | | | | | | | | | | This change adds code to report the reclaimed space after a prune. Reclaimed space from volumes, images, and containers is recorded during the prune call in a PruneReport struct. These structs are collected into a slice during a system prune and processed afterwards to calculate the total reclaimed space. Closes #8658 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* Add volume prune --filter supportBaron Lenardson2020-12-12
| | | | | | | | | | | | | | | This change adds support for the `--filter` / `?filters` arguments on the `podman volume prune` subcommand. * Adds ParseFilterArgumentsIntoFilters helper for consistent Filter string slice handling * Adds `--filter` support to podman volume prune cli * Adds `?filters...` support to podman volume prune api * Updates apiv2 / e2e tests Closes #8672 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* Make volume filters inclusiveAshley Cui2020-11-03
| | | | | | | | When using multiple filters, return a volume that matches any one of the used filters, rather than matching both of the filters. This is for compatibility with docker's cli, and more importantly, the apiv2 compat endpoint Closes #6765 Signed-off-by: Ashley Cui <acui@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podmanv2 pod create using podspecgenBrent Baude2020-03-27
| | | | | | | | using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint. also included some code refactoring as it introduced as easy circular import. Signed-off-by: Brent Baude <bbaude@redhat.com>
* podmanv2 volumesBrent Baude2020-03-24
| | | | | | add volume commands: create, inspect, ls, prune, and rm Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add basic deadlock detection for container start/removeMatthew Heon2020-02-24
| | | | | | | | | | | | | | | We can easily tell if we're going to deadlock by comparing lock IDs before actually taking the lock. Add a few checks for this in common places where deadlocks might occur. This does not yet cover pod operations, where detection is more difficult (and costly) due to the number of locks being involved being higher than 2. Also, add some error wrapping on the Podman side, so we can tell people to use `system renumber` when it occurs. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* codespell: spelling correctionsDmitry Smirnov2019-11-13
| | | | Signed-off-by: Dmitry Smirnov <onlyjob@member.fsf.org>
* Add function for looking up volumes by partial nameMatthew Heon2019-09-09
| | | | | | | | | | This isn't included in Docker, but seems handy enough. Use the new API for 'volume rm' and 'volume inspect'. Fixes #3891 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Re-add locks to volumes.Matthew Heon2019-08-28
| | | | | | | | | | This will require a 'podman system renumber' after being applied to get lock numbers for existing volumes. Add the DB backend code for rewriting volume configs and use it for updating lock numbers as part of 'system renumber'. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* When retrieving volumes, only use exact namesMatthew Heon2019-07-24
| | | | | | | | | | We should not be fuzzy matching on volume names. Docker doesn't do it, and it doesn't make much sense. Everything requires exact matches for names - only IDs allow partial matches. Fixes #3635 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* Remove locks from volumesMatthew Heon2019-02-21
| | | | | | | | | | | | | | | | | | | I was looking into why we have locks in volumes, and I'm fairly convinced they're unnecessary. We don't have a state whose accesses we need to guard with locks and syncs. The only real purpose for the lock was to prevent concurrent removal of the same volume. Looking at the code, concurrent removal ought to be fine with a bit of reordering - one or the other might fail, but we will successfully evict the volume from the state. Also, remove the 'prune' bool from RemoveVolume. None of our other API functions accept it, and it only served to toggle off more verbose error messages. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* enable podman-remote volume prunebaude2019-02-14
| | | | | | | | | | | | | allow users to remotely prune volumes. this is the last volume command for remote enablement. as such, the volume commands are being folded back into main because they are supported for both local and remote clients. also, enable all volume tests that do not use containers as containers are not enabled for the remote client yet. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote volume rmbaude2019-02-11
| | | | | | | add the ability to remove/delete volumes with the podman remote client. Signed-off-by: baude <bbaude@redhat.com>
* Add "podman volume" commandumohnani82018-12-06
Add support for podman volume and its subcommands. The commands supported are: podman volume create podman volume inspect podman volume ls podman volume rm podman volume prune This is a tool to manage volumes used by podman. For now it only handle named volumes, but eventually it will handle all volumes used by podman. Signed-off-by: umohnani8 <umohnani@redhat.com>