summaryrefslogtreecommitdiff
path: root/pkg/adapter
Commit message (Collapse)AuthorAge
* Add stubs for pkg/adapter/terminal_linux.goMiloslav Trmač2020-03-21
| | | | Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Merge pull request #5088 from mheon/begin_exec_reworkOpenShift Merge Robot2020-03-19
|\ | | | | Begin exec rework
| * Add structure for new exec session tracking to DBMatthew Heon2020-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of the rework of exec sessions, we need to address them independently of containers. In the new API, we need to be able to fetch them by their ID, regardless of what container they are associated with. Unfortunately, our existing exec sessions are tied to individual containers; there's no way to tell what container a session belongs to and retrieve it without getting every exec session for every container. This adds a pointer to the container an exec session is associated with to the database. The sessions themselves are still stored in the container. Exec-related APIs have been restructured to work with the new database representation. The originally monolithic API has been split into a number of smaller calls to allow more fine-grained control of lifecycle. Support for legacy exec sessions has been retained, but in a deprecated fashion; we should remove this in a few releases. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #5445 from sujil02/podFilter-newOpenShift Merge Robot2020-03-19
|\ \ | | | | | | Filter pods through pod list api
| * | Filter pods through pod list apiSujil022020-03-17
| |/ | | | | | | | | | | | | Refactored current filter pods flow through the shared pod functions so filter pod functionalities can be shared between api and cmd. Signed-off-by: Sujil02 <sushah@redhat.com>
* / auto updatesValentin Rothberg2020-03-17
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to auto-update containers running in systemd units as generated with `podman generate systemd --new`. `podman auto-update` looks up containers with a specified "io.containers.autoupdate" label (i.e., the auto-update policy). If the label is present and set to "image", Podman reaches out to the corresponding registry to check if the image has been updated. We consider an image to be updated if the digest in the local storage is different than the one of the remote image. If an image must be updated, Podman pulls it down and restarts the container. Note that the restarting sequence relies on systemd. At container-creation time, Podman looks up the "PODMAN_SYSTEMD_UNIT" environment variables and stores it verbatim in the container's label. This variable is now set by all systemd units generated by `podman-generate-systemd` and is set to `%n` (i.e., the name of systemd unit starting the container). This data is then being used in the auto-update sequence to instruct systemd (via DBUS) to restart the unit and hence to restart the container. Note that this implementation of auto-updates relies on systemd and requires a fully-qualified image reference to be used to create the container. This enforcement is necessary to know which image to actually check and pull. If we used an image ID, we would not know which image to check/pull anymore. Fixes: #3575 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* eat signal 23 in signal proxyBrent Baude2020-03-13
| | | | | | | | | | | | | | due to a change in golang-1.14 and it's changes to make go funcs with tight loops preemptive, signals are now getting "through" that never were before. From the golang-1.14 announce: Goroutines are now asynchronously preemptible. As a result, loops without function calls no longer potentially deadlock the scheduler or significantly delay garbage collection. This is supported on all platforms except windows/arm, darwin/arm, js/wasm, and plan9/*. A consequence of the implementation of preemption is that on Unix systems, including Linux and macOS systems, programs built with Go 1.14 will receive more signals than programs built with earlier releases. This means that programs that use packages like syscall or golang.org/x/sys/unix will see more slow system calls fail with EINTR errors. Those programs will have to handle those errors in some way, most likely looping to try the system call again. For more information about this see man 7 signal for Linux systems or similar documentation for other systems. Fixes #5483 Signed-off-by: Brent Baude <bbaude@redhat.com>
* remove imagefilter for varlink remote clientBrent Baude2020-03-12
| | | | | | the api for getting images changed to use filters but back level podman versions cannot handle it. so temporarily disabling the filtering for remote clients until the restful approach can be used. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #4772 from boaz0/closes_4628OpenShift Merge Robot2020-03-04
|\ | | | | Add the rmi flag to podman-run to delete container image
| * Add the rmi flag to podman-run to delete container imageBoaz Shuster2020-03-03
| | | | | | | | | | | | | | | | | | | | The --rmi flag will delete the container image after its execution unless that image is already been used by another container(s). This is useful when one wants to execute a container once and remove any resources attached to it. Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | consolidate env handling into pkg/envValentin Rothberg2020-03-03
|/ | | | | | | | | Env-variable related code is scattered across several packages making it hard to maintain and extend. Consolidate the code into a new pkg/env package. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* network create should use firewall pluginBrent Baude2020-02-27
| | | | | | when creating a network, podman should add the firewall plugin to the config but not specify a backend. this will allow cni to determine whether it should use an iptables|firewalld backend. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add basic deadlock detection for container start/removeMatthew Heon2020-02-24
| | | | | | | | | | | | | | | We can easily tell if we're going to deadlock by comparing lock IDs before actually taking the lock. Add a few checks for this in common places where deadlocks might occur. This does not yet cover pod operations, where detection is more difficult (and costly) due to the number of locks being involved being higher than 2. Also, add some error wrapping on the Podman side, so we can tell people to use `system renumber` when it occurs. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Friendly amendment: tests, and a help messageEd Santiago2020-02-23
| | | | | | | | | | | 1) Help message for podman port was missing [PORT] 2) Add test for 'podman port'. And, actually, an entire networking test that I'd written some weeks ago but apparently didn't 'git add'. Signed-off-by: Ed Santiago <santiago@redhat.com> Signed-off-by: Brent Baude <bbaude@redhat.com>
* fix port list by container with portbaude2020-02-23
| | | | | | | | | code was erronously misinterpretting the port as a containername. Fixes: #1791832 Signed-off-by: baude <bbaude@redhat.com> Signed-off-by: Brent Baude <bbaude@redhat.com>
* disable generation of cni firewall pluginBrent Baude2020-02-21
| | | | | | | | it turns out that when the firewall plugin is not provided as part of the configuration, then the firewall cni plugin will dynamically figure out if it should use firewalld or iptables. also removing this from the default configuration file Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #5263 from baude/logsizeOpenShift Merge Robot2020-02-21
|\ | | | | implement reverse reader for log reads
| * implement reverse reader for log readsBrent Baude2020-02-20
| | | | | | | | | | | | | | | | in cases where the log file exceeds the available memory of a system, we had a bug that triggered an oom because the entire logfile was being read when the tail parameter was given. this reads in chunks and is more or less memory safe. fixes: #5131 Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #5241 from mheon/pod_network_opts_addOpenShift Merge Robot2020-02-20
|\ \ | |/ |/| Add network opts to pods
| * Add network options to podman pod createMatthew Heon2020-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables most of the network-related functionality from `podman run` in `podman pod create`. Custom CNI networks can be specified, host networking is supported, DNS options can be configured. Also enables host networking in `podman play kube`. Fixes #2808 Fixes #3837 Fixes #4432 Fixes #4718 Fixes #4770 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Fix handler and systemd activation errorsJhon Honce2020-02-17
|/ | | | | | | | | | | | | | | | | | | On panic from handler: log warning and stack trace, report InternalServerError to client When using `podman system service` make determining the listening endpoint deterministic. // When determining _*THE*_ listening endpoint -- // 1) User input wins always // 2) systemd socket activation // 3) rootless honors XDG_RUNTIME_DIR // 4) if varlink -- adapter.DefaultVarlinkAddress // 5) lastly adapter.DefaultAPIAddress Fixes #5150 Fixes #5151 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor image tree for API usageSascha Grunert2020-02-17
| | | | Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Merge pull request #5207 from rhatdan/selinuxOpenShift Merge Robot2020-02-14
|\ | | | | Fix SELinux labels of volumes
| * Fix SELinux labels of volumesDaniel J Walsh2020-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we attempt to label a volume and the file system does not support labeling, then just warn. SELinux may or may not work, on the volume. There is no way to setup a private label on a newly created volume without using the container mountlabel. If we don't have a mount label at the time of creation of the volume, the only option we have is to create a shared label. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #5209 from vrothberg/un-dockerOpenShift Merge Robot2020-02-14
|\ \ | | | | | | Undocker part 1)
| * | add pkg/signalValentin Rothberg2020-02-14
| |/ | | | | | | | | | | | | | | | | Add pkg/signal to deal with parts of signal processing and translating signals from string to numeric representations. The code has been copied from docker/docker (and attributed with the copyright) but been reduced to only what libpod needs (on Linux). Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* / fix bug "" disable detach keysQi Wang2020-02-13
|/ | | | | | | fix #5166 This patch enables `--detach-keys ""` to disable the feature. "ctrl-p, ctrl-q" will not work after this command. Signed-off-by: Qi Wang <qiwan@redhat.com>
* Fix up play kube to use image dataDaniel J Walsh2020-02-13
| | | | | | | | | | | podman play kube was ignoring the imageData.Config Volumes WorkingDir Labels StopSignal Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* sigproxy: return after closing the channelValentin Rothberg2020-01-31
| | | | | | | | | | When stopping signal handling (e.g., to properly handle ^C) we are also closing the signal channel. We should really return from the go-routine instead of continuing and risking double-closing the channel which leads to a panic. Fixes: #5034 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* honor pull policy in play kubeBrent Baude2020-01-28
| | | | | | | | When a container specification has a pull policy, we should honor it when recreating the pods/containers from yaml. furthermore, ini kube, if a tag is :latest, then the always pull policy is automatically instituted. Fixes: #4880 Signed-off-by: Brent Baude <bbaude@redhat.com>
* APIv2 review corrections #3Brent Baude2020-01-25
| | | | | | The third pass of corrections for the APIv2. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add service endpointbaude2020-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | add service endpoint for the new API. Also supports the varlink implementation. Signed-off-by: baude <bbaude@redhat.com> Refactor to allow developer more control of API server * Add api.NewServerWithSettings() to create an API server with custom settings * Add api.ListenUnix() to create a UDS net.Listener and setup UDS Signed-off-by: Jhon Honce <jhonce@redhat.com> Signed-off-by: baude <bbaude@redhat.com> More service completion Add podman service command that allows users to run either a RESTful or varlink protocol API service. Addition of docs and RESTful listening. Signed-off-by: baude <bbaude@redhat.com> Signed-off-by: Brent Baude <bbaude@redhat.com>
* refactor top codeValentin Rothberg2020-01-15
| | | | | | | | Move the top logic from pkg/adapter into the (*libpod.Container).Top(). This way, we drop the dependency from pkg/api on pkg/adapters and have a clearer separation of concerns. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* top: use a separate pipe for the error streamValentin Rothberg2020-01-15
| | | | | | | Let's not mix apples and oranges and give stderr a dedicated pipe. This way, we don't return conmon log messages if run in debug mode. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* v2 api: top improvementsValentin Rothberg2020-01-15
| | | | | | | | * Use `pkg/adapter` to increase code reuse and reduce code redundancy. * Extend swagger docs to mention AIX descriptors. * Document the libpod endpoint which shares the same handler. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #4845 from baude/pruneforceOpenShift Merge Robot2020-01-13
|\ | | | | clarify cont
| * clarify container prune --forcebaude2020-01-13
| | | | | | | | | | | | | | | | the --force parameter should only be used for the CLI and should only dictate whether to prompt the user for confirmation. Fixes: #4844 Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #4850 from vrothberg/fix-lintingOpenShift Merge Robot2020-01-13
|\ \ | | | | | | Fix linting
| * | make lint: enable gocriticValentin Rothberg2020-01-13
| | | | | | | | | | | | | | | | | | | | | `gocritic` is a powerful linter that helps in preventing certain kinds of errors as well as enforcing a coding style. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | Merge pull request #4817 from rhatdan/codespellOpenShift Merge Robot2020-01-13
|\ \ \ | |/ / |/| | Add codespell to validate spelling mistakes in code.
| * | Add codespell to validate spelling mistakes in code.Daniel J Walsh2020-01-11
| |/ | | | | | | | | | | Fix all errors found by codespell Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #4823 from vrothberg/gen-systemdOpenShift Merge Robot2020-01-12
|\ \ | |/ |/| podman-generate-systemd --new
| * podman-generate-systemd --newValentin Rothberg2020-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a --new flag to podman-generate-systemd to create a new container via podman-run instead of starting an existing container. Creating a new container presents the challenge to find a reverse mapping from a container to the CLI flags it can be created with. We are doing this via `(Container).Config.CreateCommand` field, which includes a copy of the process' command from procFS at creating time. This field may not be useful when the container was not created via the Podman CLI (e.g., via a Python script). Hence, we do not guarantee the correctness of the generated files. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Initial commit on compatible APIJhon Honce2020-01-10
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com> Create service command Use cd cmd/service && go build . $ systemd-socket-activate -l 8081 cmd/service/service & $ curl http://localhost:8081/v1.24/images/json Signed-off-by: Jhon Honce <jhonce@redhat.com> Correct Makefile Signed-off-by: Jhon Honce <jhonce@redhat.com> Two more stragglers Signed-off-by: Jhon Honce <jhonce@redhat.com> Report errors back as http headers Signed-off-by: Jhon Honce <jhonce@redhat.com> Split out handlers, updated output Output aligned to docker structures Signed-off-by: Jhon Honce <jhonce@redhat.com> Refactored routing, added more endpoints and types * Encapsulated all the routing information in the handler_* files. * Added more serviceapi/types, including podman additions. See Info Signed-off-by: Jhon Honce <jhonce@redhat.com> Cleaned up code, implemented info content * Move Content-Type check into serviceHandler * Custom 404 handler showing the url, mostly for debugging * Refactored images: better method names and explicit http codes * Added content to /info * Added podman fields to Info struct * Added Container struct Signed-off-by: Jhon Honce <jhonce@redhat.com> Add a bunch of endpoints containers: stop, pause, unpause, wait, rm images: tag, rmi, create (pull only) Signed-off-by: baude <bbaude@redhat.com> Add even more handlers * Add serviceapi/Error() to improve error handling * Better support for API return payloads * Renamed unimplemented to unsupported these are generic endpoints we don't intend to ever support. Swarm broken out since it uses different HTTP codes to signal that the node is not in a swarm. * Added more types * API Version broken out so it can be validated in the future Signed-off-by: Jhon Honce <jhonce@redhat.com> Refactor to introduce ServiceWriter Signed-off-by: Jhon Honce <jhonce@redhat.com> populate pods endpoints /libpod/pods/.. exists, kill, pause, prune, restart, remove, start, stop, unpause Signed-off-by: baude <bbaude@redhat.com> Add components to Version, fix Error body Signed-off-by: Jhon Honce <jhonce@redhat.com> Add images pull output, fix swarm routes * docker-py tests/integration/api_client_test.py pass 100% * docker-py tests/integration/api_image_test.py pass 4/16 + Test failures include services podman does not support Signed-off-by: Jhon Honce <jhonce@redhat.com> pods endpoint submission 2 add create and others; only top and stats is left. Signed-off-by: baude <bbaude@redhat.com> Update pull image to work from empty registry Signed-off-by: Jhon Honce <jhonce@redhat.com> pod create and container create first pass at pod and container create. the container create does not quite work yet but it is very close. pod create needs a partial rewrite. also broken off the DELETE (rm/rmi) to specific handler funcs. Signed-off-by: baude <bbaude@redhat.com> Add docker-py demos, GET .../containers/json * Update serviceapi/types to reflect libpod not podman * Refactored removeImage() to provide non-streaming return Signed-off-by: Jhon Honce <jhonce@redhat.com> create container part2 finished minimal config needed for create container. started demo.py for upcoming talk Signed-off-by: baude <bbaude@redhat.com> Stop server after honoring request * Remove casting for method calls * Improve WriteResponse() * Update Container API type to match docker API Signed-off-by: Jhon Honce <jhonce@redhat.com> fix namespace assumptions cleaned up namespace issues with libpod. Signed-off-by: baude <bbaude@redhat.com> wip Signed-off-by: baude <bbaude@redhat.com> Add sliding window when shutting down server * Added a Timeout rather than closing down service on each call * Added gorilla/schema dependency for Decode'ing query parameters * Improved error handling * Container logs returned and multiplexed for stdout and stderr * .../containers/{name}/logs?stdout=True&stderr=True * Container stats * .../containers/{name}/stats Signed-off-by: Jhon Honce <jhonce@redhat.com> Improve error handling * Add check for at least one std stream required for /containers/{id}/logs * Add check for state in /containers/{id}/top * Fill in more fields for /info * Fixed error checking in service start code Signed-off-by: Jhon Honce <jhonce@redhat.com> get rest of image tests for pass Signed-off-by: baude <bbaude@redhat.com> linting our content Signed-off-by: baude <bbaude@redhat.com> more linting Signed-off-by: baude <bbaude@redhat.com> more linting Signed-off-by: baude <bbaude@redhat.com> pruning Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]apiv2 pods migrate from using args in the url to using a json struct in body for pod create. Signed-off-by: baude <bbaude@redhat.com> fix handler_images prune prune's api changed slightly to deal with filters. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]enabled base container create tests enabling the base container create tests which allow us to get more into the stop, kill, etc tests. many new tests now pass. Signed-off-by: baude <bbaude@redhat.com> serviceapi errors: append error message to API message I dearly hope this is not breaking any other tests but debugging "Internal Server Error" is not helpful to any user. In case, it breaks tests, we can rever the commit - that's why it's a small one. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> serviceAPI: add containers/prune endpoint Signed-off-by: Valentin Rothberg <rothberg@redhat.com> add `service` make target Also remove the non-functional sub-Makefile. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> add make targets for testing the service * `sudo make run-service` for running the service. * `DOCKERPY_TEST="tests/integration/api_container_test.py::ListContainersTest" \ make run-docker-py-tests` for running a specific tests. Run all tests by leaving the env variable empty. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> Split handlers and server packages The files were split to help contain bloat. The api/server package will contain all code related to the functioning of the server while api/handlers will have all the code related to implementing the end points. api/server/register_* will contain the methods for registering endpoints. Additionally, they will have the comments for generating the swagger spec file. See api/handlers/version.go for a small example handler, api/handlers/containers.go contains much more complex handlers. Signed-off-by: Jhon Honce <jhonce@redhat.com> [CI:DOCS]enabled more tests Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]libpod endpoints small refactor for libpod inclusion and began adding endpoints. Signed-off-by: baude <bbaude@redhat.com> Implement /build and /events * Include crypto libraries for future ssh work Signed-off-by: Jhon Honce <jhonce@redhat.com> [CI:DOCS]more image implementations convert from using for to query structs among other changes including new endpoints. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add bindings for golang Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add volume endpoints for libpod create, inspect, ls, prune, and rm Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]apiv2 healthcheck enablement wire up container healthchecks for the api. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]Add mount endpoints via the api, allow ability to mount a container and list container mounts. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]Add search endpoint add search endpoint with golang bindings Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]more apiv2 development misc population of methods, etc Signed-off-by: baude <bbaude@redhat.com> rebase cleanup and epoch reset Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add more network endpoints also, add some initial error handling and convenience functions for standard endpoints. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]use helper funcs for bindings use the methods developed to make writing bindings less duplicative and easier to use. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add return info for prereview begin to add return info and status codes for errors so that we can review the apiv2 Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]first pass at adding swagger docs for api Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #4802 from rhatdan/varlinkOpenShift Merge Robot2020-01-09
|\ | | | | Fix podman-remote info to show registry data
| * Fix podman-remote info to show registry dataDaniel J Walsh2020-01-07
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #4816 from vrothberg/lintOpenShift Merge Robot2020-01-08
|\ \ | | | | | | Fix golint errors
| * | fix lint - pkg/adapter: comment exported APIValentin Rothberg2020-01-08
| |/ | | | | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* / Add `untag` sub-commandSascha Grunert2020-01-08
|/ | | | | | | | Podman now supports untagging images via the `untag` sub-command for the root and `image` commands. Testing and documentation has been added as well. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* play kube: make seccomp handling better conform to k8sPeter Hunt2020-01-03
| | | | | | | Add flag --seccomp-profile-root in play kube to allow users to specify where to look for seccomp profiles update tests Signed-off-by: Peter Hunt <pehunt@redhat.com>