summaryrefslogtreecommitdiff
path: root/pkg/api/handlers/compat
Commit message (Collapse)AuthorAge
* Vendor in containers/buildah@v1.26.1Daniel J Walsh2022-05-05
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* enable gocritic linterPaul Holzinger2022-04-26
| | | | | | | | | | | | | | | | | | | | | | The linter ensures a common code style. - use switch/case instead of else if - use if instead of switch/case for single case statement - add space between comment and text - detect the use of defer with os.Exit() - use short form var += "..." instead of var = var + "..." - detect problems with append() ``` newSlice := append(orgSlice, val) ``` This could lead to nasty bugs because the orgSlice will be changed in place if it has enough capacity too hold the new elements. Thus we newSlice might not be a copy. Of course most of the changes are just cosmetic and do not cause any logic errors but I think it is a good idea to enforce a common style. This should help maintainability. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Pass --tls-verify option in podman -remote buildDaniel J Walsh2022-04-25
| | | | | | | | Fixes: https://github.com/containers/podman/issues/13979 [NO NEW TESTS NEEDED] Buildah has a test for this. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* replace golint with revive linterPaul Holzinger2022-04-22
| | | | | | | | | | | | golint, scopelint and interfacer are deprecated. golint is replaced by revive. This linter is better because it will also check for our error style: `error strings should not be capitalized or end with punctuation or a newline` scopelint is replaced by exportloopref (already endabled) interfacer has no replacement but I do not think this linter is important. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #13872 from vrothberg/revert-sizeOpenShift Merge Robot2022-04-14
|\ | | | | Revert "images --size"
| * Revert "images --size"Valentin Rothberg2022-04-14
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e133a06d2f4a3e94bfbd60b647046f2f515c9c24. @nalind found a proper fix in c/storage [1] to address the performance issue. So we really don't need the flag anymore. Note the flag has never made it into any release. [1] https://github.com/containers/storage/commit/d76b3606fc9ca975bf436379f91105f0fac1555f Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* | Allow HTTP attach to stopped containersMatthew Heon2022-04-13
|/ | | | | | | | | | | | | | | | | | There's a potential race condition where we attempt to attach to a container immediately after it's been stopped, but before the cleanup process has run on it. The existing code doesn't allow an attach to containers in the Stopped state (cleanup process has not run) but does allow an attach to containers in the Exited state (cleanup process has run). This doesn't make very much sense and there's no technical reason to restrict attach to only Exited containers, so allow attaching to Stopped containers. [NO NEW TESTS NEEDED] Testing this is very racy - we need to get in before the cleanup process runs, which isn't really deterministic when we're invoked from a script - like the CI tests. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #13687 from rhatdan/VENDOROpenShift Merge Robot2022-04-08
|\ | | | | Vendor in new opencontainers/selinux
| * Vendor in new opencontainers/selinuxDaniel J Walsh2022-04-08
| | | | | | | | | | | | | | | | Also update vendor of containers/common,buildah,storage,image Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2069586 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | images --sizeValentin Rothberg2022-04-08
|/ | | | | | | | | | Add a --size option to podman images to allow for disabling computing the size of listed images. If listing images is critical to performance, user may chose to turn off size computation to speed things up. Context: #13755 Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Merge pull request #13597 from Luap99/statsOpenShift Merge Robot2022-03-23
|\ | | | | podman stats: calc CPU percentage correctly
| * podman stats: calc CPU percentage correctlyPaul Holzinger2022-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When you run podman stats, the first interval always shows the wrong cpu usage. To calculate cpu percentage we get the cpu time from the cgroup and compare this against the system time between two stats. Since the first time we do not have a previous stats an empty struct is used instead. Thus we do not use the actual running time of the container but the current unix timestamp (time since Jan 1 1970). To fix this we make sure that the previous stats time is set to the container start time, when it is empty. [NO NEW TESTS NEEDED] No idea how I could create a test which would have a predictable cpu usage. See the linked bugzilla for a reproducer. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2066145 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Update swagger to improve compatibilityJhon Honce2022-03-22
| | | | | | | | | | | | | | | | | | | | [NO NEW TESTS NEEDED] Improve swagger and handler code compatibility. Fixes #12804 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | linter: enable makezeroValentin Rothberg2022-03-22
|/ | | | Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Add ExitCommandDelay configuration use in API exec handlerRover van der Noort2022-03-04
| | | | | | [NO NEW TESTS NEEDED] Signed-off-by: Rover van der Noort <s.r.vandernoort@student.tudelft.nl>
* container-commit: support --squash to squash layers into oneAditya R2022-02-23
| | | | | | | | | | | Allow users to commit containers into a single layer. Usage ```bash podman container commit --squash <name> ``` Signed-off-by: Aditya R <arajan@redhat.com>
* compat: endpoint /build must set header content type as application/json in ↵Aditya R2022-02-07
| | | | | | | | | | | | | | reponse Lot of clients are expecting proper `Content-type: application/json` configured in response headers of `/build` compat api. Following commit fixes that. Fixes issues where code is setting header field after writing header which is wrong. We must set `content-type` before we write and flush http header. Signed-off-by: Aditya R <arajan@redhat.com>
* remote build: set rootless oci isolation correctlyPaul Holzinger2022-01-24
| | | | | | | | | | | | | | When we run rootless buildah needs to have IsolationOCIRootless set otherwise it will run code which cannot be used as rootless user. Podman should use the buildah default if possible and change it to rootless mode if needed. [NO NEW TESTS NEEDED] Should be covered by existing tests once we have podman-remote rootless tests. Fixes #12989 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Remove unused param and clean API handlersJakub Guzik2022-01-22
| | | | | | | | This commit removes error message string from utils.Error in pkg/api. Param was not used inside a function for quite a long time [NO NEW TESTS NEEDED] Signed-off-by: Jakub Guzik <jguzik@redhat.com>
* Fix #2 for compat commit handling of --changesDaniel J Walsh2022-01-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* compat: remove hardcoded index from load images output reportAditya R2022-01-21
| | | | Signed-off-by: Aditya R <arajan@redhat.com>
* compat: images/load must be able to load tar with multiple imagesAditya R2022-01-21
| | | | | | | | `http:/host:port/images/load` fails to accept tar with more than one images however manual load works as expected. Remove explicit check for `1` image and only fail if result set has value less than `1`. Signed-off-by: Aditya R <arajan@redhat.com>
* Handle changes in docker compat modeDaniel J Walsh2022-01-19
| | | | | | Fixes: https://github.com/containers/podman/issues/12830 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add IndexConfigs to compat /info endpointMatej Vasek2022-01-19
| | | | Signed-off-by: Matej Vasek <mvasek@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #12860 from rhatdan/cgroupsOpenShift Merge Robot2022-01-17
|\ | | | | Use CONTAINERS_CONF cgroups flag for remote API.
| * Standardize on capatalized CgroupsDaniel J Walsh2022-01-14
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Remove two GetImages functions from APIDaniel J Walsh2022-01-14
|/ | | | | | | | | [NO NEW TESTS NEEDED] This is just code cleanup. The remote API has three different GetImages functions, which I believe can be handled by just one function. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman build enable --all-platforms and --unsetenvPaul Holzinger2022-01-13
| | | | | | | Make sure we add support for allplatforms and unsetenv to both local and remote podman. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* update buildah to latest and use new network stackPaul Holzinger2022-01-12
| | | | | | Make sure buildah uses the new network stack. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* use libnetwork from c/commonPaul Holzinger2022-01-12
| | | | | | | | The libpod/network packages were moved to c/common so that buildah can use it as well. To prevent duplication use it in podman as well and remove it from here. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add podman rm --dependDaniel J Walsh2022-01-11
| | | | | | | | | | | This option causes Podman to not only remove the specified containers but all of the containers that depend on the specified containers. Fixes: https://github.com/containers/podman/issues/10360 Also ran codespell on the code Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #11538 from mtrmac/http-credentialsOpenShift Merge Robot2022-01-06
|\ | | | | Fix HTTP credentials passing
| * Don't return a header name from auth.GetCredentialsMiloslav Trmač2021-12-10
| | | | | | | | | | | | | | | | | | | | | | Almost every caller is using it only to wrap an error in exactly the same way, so move that error context into GetCredentials and simplify the users. (The one other caller, build, was even wrapping the error incorrectly talking about query parameters; so let it use the same text as the others.) Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* | Merge pull request #12735 from rhatdan/mountOpenShift Merge Robot2022-01-04
|\ \ | | | | | | Fix Container List API call to return mount info
| * | Fix Container List API call to return mount infoDaniel J Walsh2022-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | We are hard coding mounts to return nil in compat API, since we have the data, we should return it. Fixes: https://github.com/containers/podman/issues/12734 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Merge pull request #12643 from leahneukirchen/events-compatOpenShift Merge Robot2022-01-04
|\ \ \ | |/ / |/| | legacy events: also set Action="die"
| * | legacy events: also set exitCodeLeah Neukirchen2022-01-03
| | | | | | | | | | | | | | | | | | | | | | | | For Status = "die", Docker sets the exit code of the container to a field "exitCode". Podman uses "containerExitCode". Copy the value into "exitCode" as well, for compatibility. Signed-off-by: Leah Neukirchen <leah@vuxu.org>
| * | legacy events: also set Action="die"Leah Neukirchen2021-12-17
| | | | | | | | | | | | | | | | | | | | | | | | Since #10168, on the event "died", the Status is set to "die" for compatibility with the Docker API. Docker also sets the field Action to "died", so do the same here. Signed-off-by: Leah Neukirchen <leah@vuxu.org>
* | | prefix imageId with sha256: in containers listOliver2021-12-29
| | | | | | | | | | | | | | | | | | test for compat API ImageId Signed-off-by: Oliver Thallmair <oliver.thallmair@mailbox.org>
* | | Warn on use of --kernel-memoryDaniel J Walsh2021-12-22
|/ / | | | | | | | | | | | | | | | | It has been deprecated and is no longer supported. Fully remove it and only print a warning if a user uses it. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #12534 from Luap99/network-dbOpenShift Merge Robot2021-12-15
|\ \ | | | | | | network db rewrite
| * | fix incorrect swagger doc for network dis/connectPaul Holzinger2021-12-14
| | | | | | | | | | | | | | | | | | | | | The swagger api docs used the extra Body struct as part of the request which is wrong. We just want the plain type. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
| * | network connect allow ip, ipv6 and mac addressPaul Holzinger2021-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Network connect now supports setting a static ipv4, ipv6 and mac address for the container network. The options are added to the cli and api. Fixes #9883 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | | Fixes #12063 Add docker compatible output after image build.Ananth Bhaskararaman2021-12-14
|/ / | | | | | | Signed-off-by: Ananth Bhaskararaman <antsub@gmail.com>
* / compat build: adhere to q/quietValentin Rothberg2021-12-13
|/ | | | | Fixes: #12566 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Update vendor or containers/common moving pkg/cgroups thereDaniel J Walsh2021-12-07
| | | | | | | [NO NEW TESTS NEEDED] This is just moving pkg/cgroups out so existing tests should be fine. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #12483 from vrothberg/fix-12468OpenShift Merge Robot2021-12-02
|\ | | | | compat API: push: report size of manifest
| * compat API: push: report size of manifestDaniel J Walsh2021-12-02
| | | | | | | | | | | | | | | | | | | | | | | | We don't yet have a local registry running in the APIv2 tests. Tested manually. [NO NEW TESTS NEEDED] Fixes: https://github.com/containers/podman/issues/12468 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | compat: images/jsonValentin Rothberg2021-12-02
|/ | | | | | | Do not list manifest lists. Docker doesn't either. Fixes: #12453 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-10-22 17:36:32 +0000