aboutsummaryrefslogtreecommitdiff
path: root/pkg/api/handlers/compat
Commit message (Collapse)AuthorAge
* Do not allow network modes to be used as network namesPaul Holzinger2021-09-16
| | | | | | | | | `podman network create` should not allow users to create networks with a name which is already used for a network mode in `podman run --network`. Fixes #11448 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* fix inverted conditionMatej Vasek2021-09-16
| | | | | | [NO TESTS NEEDED] Signed-off-by: Matej Vasek <mvasek@redhat.com>
* Merge pull request #11322 from Luap99/network-libpodOpenShift Merge Robot2021-09-15
|\ | | | | Wire network interface into libpod
| * Wire network interface into libpodPaul Holzinger2021-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of the new network interface in libpod. This commit contains several breaking changes: - podman network create only outputs the new network name and not file path. - podman network ls shows the network driver instead of the cni version and plugins. - podman network inspect outputs the new network struct and not the cni conflist. - The bindings and libpod api endpoints have been changed to use the new network structure. The container network status is stored in a new field in the state. The status should be received with the new `c.getNetworkStatus`. This will migrate the old status to the new format. Therefore old containers should contine to work correctly in all cases even when network connect/ disconnect is used. New features: - podman network reload keeps the ip and mac for more than one network. - podman container restore keeps the ip and mac for more than one network. - The network create compat endpoint can now use more than one ipam config. The man pages and the swagger doc are updated to reflect the latest changes. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Fix /auth compat endpointMatej Vasek2021-09-15
|/ | | | Signed-off-by: Matej Vasek <mvasek@redhat.com>
* Merge pull request #11578 from jelly/handle_nil_pointer_derefOpenShift Merge Robot2021-09-15
|\ | | | | api: handle nil pointer dereference in api endpoints
| * api: handle nil pointer dereference in rest endpointsJelle van der Waa2021-09-15
| | | | | | | | | | | | | | | | When `?all=garbage` is passed to an API endpoint schema validation fails and err is nil. Wrapf uses err to create an error message causing a nil pointer dereference. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
* | build: take advantage of --platform listsNalin Dahyabhai2021-09-14
|/ | | | | | | | | | | The builder can take a list of platforms in the Platforms field of its BuildOptions argument, and we should definitely take advantage of that. The `bud-multiple-platform-values` test from buildah exercises support for this, so [NO TESTS NEEDED] Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* Refacter API server emphasis on loggingJhon Honce2021-09-10
| | | | | | | | | | | | | | | * To aid in debugging log API request and response bodies at trace level. Events can be correlated using the X-Reference-Id. * Server now echos X-Reference-Id from client if set, otherwise generates an unique id. * Move logic for X-Reference-Id into middleware * Change uses of Header.Add() to Set() when setting Content-Type * Log API operations in Apache format using gorilla middleware * Port server code to use BaseContext and ConnContext Fixes #10053 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* api: correctly set the container statsGiuseppe Scrivano2021-09-10
| | | | | | | override the outer scope variable instead of creating a local one. Otherwise the wrong variable would be used for the next iterations. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add filtering functionality to http api secrets listJakub Guzik2021-09-03
| | | | | | | | Filtering is missing in both compat API and libpod API, while docker has filtering functinality. This commit enables filtering option using name and id in both libpod and http API. Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* InfraContainer Reworkcdoern2021-08-26
| | | | | | | | | | InfraContainer should go through the same creation process as regular containers. This change was from the cmd level down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state) Signed-off-by: cdoern <cdoern@redhat.com>
* Merge pull request #11218 from cdoern/untilBugOpenShift Merge Robot2021-08-26
|\ | | | | logFile until flag issue, negative duration replaced with positive
| * logFile until flag issuecdoern2021-08-23
| | | | | | | | | | | | | | | | | | we were adding a negative duration in podman events, causing inputs like -5s to be correct and 5s to be incorrect. fixes #11158 Signed-off-by: cdoern <cdoern@redhat.com>
* | logs: adjust handling around partial log messagesNalin Dahyabhai2021-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In libpod/logs.LogLine.Write(), don't write a newline to stdout/stderr when the log message is only part of a line. In libpod.ConmonOCIRuntime.HTTPAttach(), don't send a newline over the HTTP connection when the log message is only part of a line. In pkg/api/handlers/compat.LogsFromContainer(), don't send a newline over the HTTP connection when the log message is only part of a line, and don't make doing so conditional on whether or not the client used the docker or podman endpoint. In pkg/domain/infra/tunnel.ContainerEngine.ContainerLogs(), don't add our own newline to log messages, since they already come through from the server when they need to. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* | Merge pull request #11286 from jwhonce/issues/11227OpenShift Merge Robot2021-08-20
|\ \ | | | | | | Update /version endpoint to add components
| * | Update /version endpoint to add componentsJhon Honce2021-08-19
| | | | | | | | | | | | | | | | | | | | | | | | * Include OCI and conmon information as components Fixes #11227 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | | Merge pull request #11280 from Luap99/info-pluginsOpenShift Merge Robot2021-08-19
|\ \ \ | |/ / |/| | Podman info output plugin information
| * | Podman info output plugin informationPaul Holzinger2021-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | For docker compat include information about available volume, log and network drivers which should be listed under the plugins key. Fixes #11265 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | | [NO TESTS NEEDED] Clean up swaggerJhon Honce2021-08-19
|/ / | | | | | | | | | | | | | | | | | | | | | | | | * Removed defined by unused responses * Added missing body definitions * Updated header input definitions Outstanding issues: * Supporting body ContainerConfig for /commit endpoint Fixes #8577 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* / For compatibility, ignore Content-TypeJhon Honce2021-08-11
|/ | | | | | | | | | | | | | Endpoint /build logs an info entry when a client uses the wrong Content-Type for build payload. Given Content-Type is ignored and assumed to be "application/x-tar". Endpoint /libpod/build will fail unless "application/x-tar" or "application/tar" is given for Content-Type. "application/tar" will be logged as an info entry. Fixes #11012 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Bump Buildah to v1.22.0 [NO TESTS NEEDED]TomSweeneyRedHat2021-08-04
| | | | | | | | | Bump Buildah to v1.22.0 in preparation for RHEL 8.5 and RHEL 9.0beta. Also bump c/common to v0.42.1 [NO TESTS NEEDED] Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Compat API: Fix healthcheck status and healthcheck configMilivoje Legenovic2021-08-03
| | | | | | | | | | | | | | | | Fixes: - Do not show healthcheck status if not available or if container status is "created" (Docker behaviour) - Show healthcheck configuration if present (Config.Healthcheck) Tests: - Ensure State.Health is not present if container status is "created" - Ensure Config.Healthcheck is present and values correct - Ensure State.Health is present if container started Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
* remote build: fix streaming and error handlingValentin Rothberg2021-07-28
| | | | | | | | | | | | | | | | | | | | Address a number of issues in the streaming logic in remote build, most importantly an error in using buffered channels on the server side. The pattern below does not guarantee that the channel is entirely read before the context fires. for { select { case <- bufferedChannel: ... case <- ctx.Done(): ... } } Fixes: #10154 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* support container to container copyMehul Arora2021-07-27
| | | | | | | | | Implement container to container copy. Previously data could only be copied from/to the host. Fixes: #7370 Co-authored-by: Mehul Arora <aroram18@mcmaster.ca> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* compat: image create: handle platform correctlyValentin Rothberg2021-07-20
| | | | | | | | | Handle the platform parameter correctly. The parameter was only parsed in presence of credentials and the code was a bit complex. Also add a regression test. Fixes: #10977 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* vendor containers/common@mainValentin Rothberg2021-07-16
| | | | | | | | | | | | | The `IgnorePlatform` options has been removed from the `LookupImageOptions` in libimage to properly support multi-arch images. Skip one buildah-bud test which requires updated CI images. This is currently being done in github.com/containers/podman/pull/10829 but we need to unblock merging common and buildah into podman. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Return macvlan object in /network REST API responseVikas Goel2021-07-14
| | | | | | Fixes: #10266 Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
* Implemented Until Query Parameter for Containers/logscdoern2021-07-09
| | | | | | | | compat containers/logs was missing actual usage of until query param. fixes #10859 Signed-off-by: cdoern <cdoern@redhat.com>
* Merge pull request #10836 from Luap99/diffOpenShift Merge Robot2021-07-03
|\ | | | | podman diff accept two images or containers
| * podman diff accept two images or containersPaul Holzinger2021-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First, make podman diff accept optionally a second argument. This allows the user to specify a second image/container to compare the first with. If it is not set the parent layer will be used as before. Second, podman container diff should only use containers and podman image diff should only use images. Previously, podman container diff would use the image when both an image and container with this name exists. To make this work two new parameters have been added to the api. If they are not used the previous behaviour is used. The same applies to the bindings. Fixes #10649 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Implement --archive flag for podman cpMatej Vasek2021-07-01
|/ | | | Signed-off-by: Matej Vasek <mvasek@redhat.com>
* Bump github.com/containers/storage from 1.32.3 to 1.32.5Daniel J Walsh2021-06-29
| | | | | | | | | | | | | | | | | Bumps [github.com/containers/storage](https://github.com/containers/storage) from 1.32.3 to 1.32.5. - [Release notes](https://github.com/containers/storage/releases) - [Changelog](https://github.com/containers/storage/blob/main/docs/containers-storage-changes.md) - [Commits](https://github.com/containers/storage/compare/v1.32.3...v1.32.5) --- updated-dependencies: - dependency-name: github.com/containers/storage dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* remove `pkg/registries`Valentin Rothberg2021-06-25
| | | | | | | | | | | | | | Pull the trigger on the `pkg/registries` package which acted as a proxy for `c/image/pkg/sysregistriesv2`. Callers should be using the packages from c/image directly, if needed at all. Also make use of libimage's SystemContext() method which returns a copy of a system context, further reducing the risk of unintentionally altering global data. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #10610 from cdoern/healthCheckOpenShift Merge Robot2021-06-23
|\ | | | | Edited compat handling code for containers/json status and added python tests
| * Health Check is not handled in the compat LibpodToContainerJSONcdoern2021-06-23
| | | | | | | | | | | | | | | | Added parsing and handling for the healthCheck status within containers.go. Also modified tests fixes #10457 Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* | Merge pull request #10683 from Luap99/exec-resizeOpenShift Merge Robot2021-06-16
|\ \ | | | | | | Fix resize race with podman exec -it
| * | Fix resize race with podman exec -itPaul Holzinger2021-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When starting a process with `podman exec -it` the terminal is resized after the process is started. To fix this allow exec start to accept the terminal height and width as parameter and let it resize right before the process is started. Fixes #10560 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | | Merge pull request #10622 from cdoern/imgImportFeatureOpenShift Merge Robot2021-06-15
|\ \ \ | |/ / |/| | compat import imageFromSrc support for platform query parameter
| * | Image import fromSrc now supports OS/Archcdoern2021-06-14
| | | | | | | | | | | | | | | | | | | | | | | | added handling in entities and compat to support passing a specified OS/Arch while importing from SRC. fixes #10566 Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* | | Fix handling of podman-remote build --deviceDaniel J Walsh2021-06-13
| | | | | | | | | | | | | | | | | | Fixes: https://github.com/containers/podman/issues/10614 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Fall back to string for dockerfile parameterAlex Schultz2021-06-11
|/ / | | | | | | | | | | | | | | | | | | | | a9cb824981db3fee6b8445b29e513c89e9b9b00b changed the expectations of the dockerfile parameter to be json data however it's a string. In order to support both, let's attempt json and fall back to a string if the json parsing fails. Closes #10660 Signed-off-by: Alex Schultz <aschultz@redhat.com>
* | Merge pull request #10550 from rhatdan/DockerfileOpenShift Merge Robot2021-06-09
|\ \ | |/ |/| podman-remote build should handle -f option properly
| * podman-remote build should handle -f option properlyDaniel J Walsh2021-06-08
| | | | | | | | | | | | | | | | | | | | podman-remote build has to handle multiple different locations for the Containerfile. Currently this works in local mode but not when using podman-remote. Fixes: https://github.com/containers/podman/issues/9871 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #10603 from cdoern/networksQueryCharlie Doern2021-06-08
|\ \ | |/ |/| implemented verbose and scope as possible
| * fixed docs and schemascdoern2021-06-08
| | | | | | | | Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* | Merge pull request #10597 from Luap99/pruneOpenShift Merge Robot2021-06-08
|\ \ | | | | | | Fix network prune api docs
| * | Fix network prune api docsPaul Holzinger2021-06-08
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The api doc used wrong response examples for both the compat and libpod network prune endpoints. Change the doc so that it matches the actual return values. Also fix the endpoints to return an empty array instead of null when no networks are removed. [NO TESTS NEEDED] Fixes: #10564 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Merge pull request #10548 from cdoern/imgFeatureOpenShift Merge Robot2021-06-08
|\ \ | |/ |/| API images/create added missing parameters platform, message, repo
| * made requested changes, fixed api testscdoern2021-06-04
| | | | | | | | Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-01-02 20:11:44 +0000