| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes #6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
- misspell
- prealloc
- unparam
- nakedret
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |\
| |
| | |
Turn on golint
|
| | |
| |
| |
| | |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes #6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format.
Fixes: #6409
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
v2 copy endpoints
|
| | |
| |
| |
| |
| |
| | |
add copy endpoint inputs and outputs. these endpoints are not implemented yet, nor are any bindings. this allows us to update this later without having to change our api version.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |/
|
|
|
|
|
| |
$ cd test/apiv2
$ python -m unittest -v test_rest_v1_0_0.TestApi
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |\
| |
| | |
remote manifest test
|
| | |
| |
| |
| |
| |
| | |
Enable remove manifest tests. Skip --purge test because remote does not support it.
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |/
|
|
|
|
|
| |
As system reset too dangerous for remote use, deleting the functionality
and the test case.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |
|
|
|
|
| |
the one remaining test that is still skipped do to missing exec function
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
enable remote image tree
|
| | |
| |
| |
| | |
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |/
|
|
| |
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
| |
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |\
| |
| | |
Adding system prune for podman v2
|
| | |
| |
| |
| |
| |
| |
| | |
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |\ \
| | |
| | | |
Add support for volumes-from, image volumes, init
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |\ \ \
| |/ /
|/| | |
enable load integration tests
|
| | | |
| | |
| | |
| | |
| | |
| | | |
fix bug where multiple images can be loaded and have to be able to handle the return of multiple names
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |/ /
| |
| |
| |
| |
| |
| | |
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The length and size of our error messages on failure to pull
is huge. This patch at least eliminates some of the wrapping.
But I think eventually we need to look at containers/image
and see if we can modify the error messages to something a little
more human friendly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While this commit was initially meant to fix #5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix #5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
| |
Add the ability to prune pods for api v2,
Includes the addition of force flag, for client side prompt.
Update test suite to support this use case.
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| |
|
|
|
|
| |
Various fixes to protect against regressions in system tests
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
podman v2 remove bloat v2
|
| | |
| |
| |
| |
| |
| | |
rid ourseleves of libpod references in v2 client
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |/
|
|
|
|
|
|
| |
enable filters when listing containers on the libpod endpoint.
Fixes: #5841
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
| |
this is second phase of removing unneeded bloat in the remote client. this is important to be able to reduce the client size as well as possible native compilation for windows/mac.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
| |
use libpod only in the specgen/generate package so that the remote clients do not inherit libpod bloat.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
podmanV2: implement search
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Also implement a new libpod endpoint to add more parameters and to
prevent us from converting between slices and maps and make use of
the filter parsing in the image backend.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |/
|
|
|
|
| |
add the ability to init a container both local and remote
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
podmanv2 ps
|
| | |
| |
| |
| |
| |
| | |
add the ability to list containers
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |/
|
|
|
|
| |
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\
| |
| | |
podmanv2 pod inspect
|
| | |
| |
| |
| |
| |
| | |
Add the ability to inspect pod in podmanv2
Signed-off-by: Sujil02 <sushah@redhat.com>
|
| | |
| |
| |
| |
| |
| | |
create a container in podmanv2 using specgen approach. this is the core implementation and still has quite a bit of code commented out specifically around volumes, devices, and namespaces. need contributions from smes on these parts.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |\ \
| | |
| | | |
podmanv2 save image
|
| | | |
| | |
| | |
| | |
| | |
| | | |
add ability to save an image for podman v2
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
