| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |\
| |
| | |
Add 'stats-dump' file to exported checkpoint
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There was the question about how long it takes to create a checkpoint.
CRIU already provides some statistics about how long it takes to create
a checkpoint and similar.
With this change the file 'stats-dump' is included in the checkpoint
archive and the tool checkpointctl can be used to display these
statistics:
./checkpointctl show -t /tmp/cp.tar --print-stats
Displaying container checkpoint data from /tmp/dump.tar
[...]
CRIU dump statistics
+---------------+-------------+--------------+---------------+---------------+---------------+
| FREEZING TIME | FROZEN TIME | MEMDUMP TIME | MEMWRITE TIME | PAGES SCANNED | PAGES WRITTEN |
+---------------+-------------+--------------+---------------+---------------+---------------+
| 105405 us | 1376964 us | 504399 us | 446571 us | 492153 | 88689 |
+---------------+-------------+--------------+---------------+---------------+---------------+
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
| |
Remove ERROR: Error stutter from logrus messages also.
[ NO TESTS NEEDED] This is just code cleanup.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support to checkpoint containers out of pods and restore
container into pods.
It is only possible to restore a container into a pod if it has been
checkpointed out of pod. It is also not possible to restore a non pod
container into a pod.
The main reason this does not work is the PID namespace. If a non pod
container is being restored in a pod with a shared PID namespace, at
least one process in the restored container uses PID 1 which is already
in use by the infrastructure container. If someone tries to restore
container from a pod with a shared PID namespace without a shared PID
namespace it will also fail because the resulting PID namespace will not
have a PID 1.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Restored containers, until now, had the same port mappings as the
original started container. This commit adds the parameter '--publish'
to 'podman container restore' with the same semantic as during
create/run.
With this change it is possible to create a copy from a container with a
'--publish' rule and replace the original '--publish' setting with a new
one.
# podman run -p 2345:8080 container
# podman container checkpoint -l --export=dump.tar
# podman container restore -p 5432:8080 --import=dump.tar
The restored container will now listen on localhost:5432 instead of
localhost:2345 as the original created container.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
| |
No functional changes.
[NO TESTS NEEDED] - only moving code around
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
To be able to reuse common checkpoint/restore functions this commit
moves code to pkg/checkpoint/crutils.
This commit has not functional changes. It only moves code around.
[NO TESTS NEEDED] - only moving code around
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
| |
Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When migrating a container with associated volumes, the content of
these volumes should be made available on the destination machine.
This patch enables container checkpoint/restore with named volumes
by including the content of volumes in checkpoint file. On restore,
volumes associated with container are created and their content is
restored.
The --ignore-volumes option is introduced to disable this feature.
Example:
# podman container checkpoint --export checkpoint.tar.gz <container>
The content of all volumes associated with the container are included
in `checkpoint.tar.gz`
# podman container checkpoint --export checkpoint.tar.gz --ignore-volumes <container>
The content of volumes is not included in `checkpoint.tar.gz`. This is
useful, for example, when the checkpoint/restore is performed on the
same machine.
# podman container restore --import checkpoint.tar.gz
The associated volumes will be created and their content will be
restored. Podman will exit with an error if volumes with the same
name already exist on the system or the content of volumes is not
included in checkpoint.tar.gz
# podman container restore --ignore-volumes --import checkpoint.tar.gz
Volumes associated with container must already exist. Podman will not
create them or restore their content.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
|
| |
|
|
|
|
|
|
|
| |
Instead of specifying restore option arguments individually from
RestoreOptions, provide the 'options' object to the CRImportCheckpoint
method. This change makes the code in CRImportCheckpoint easier to
extend as it doesn't require excessive number of function parameters.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like
fails, the error message already contains the file name and the
operation that fails, so there is no need to wrap the error with
something like "open %s failed".
While at it
- replace a few places with os.Open, ioutil.ReadAll with
ioutil.ReadFile.
- replace errors.Wrapf with errors.Wrap for cases where there
are no %-style arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
|
|
add the ability to checkpoint and restore containers on v2podman
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
