summaryrefslogtreecommitdiff
path: root/pkg/domain/entities/pods.go
Commit message (Collapse)AuthorAge
* kube: Add support for podman pod logsAditya Rajan2021-09-05
| | | | | | | | | | | Following PR adds support for `kubectl` like `pod logs` to podman. Usage `podman pod logs <podIDorName` gives a stream of logs for all the containers within the pod with **containername** as a field. Just like **`kubectl`** also supports `podman pod logs -c ctrIDorName podIDorName` to limit the log stream to any of the specificied container which belongs to pod. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* InfraContainer Reworkcdoern2021-08-26
| | | | | | | | | | InfraContainer should go through the same creation process as regular containers. This change was from the cmd level down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state) Signed-off-by: cdoern <cdoern@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* --infra-name command line argumentJosé Guilherme Vanz2021-07-15
| | | | | | | | | Adds the new --infra-name command line argument allowing users to define the name of the infra container Issue #10794 Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
* podman pod create --pid flagcdoern2021-07-15
| | | | | | | | added support for --pid flag. User can specify ns:file, pod, private, or host. container returns an error since you cannot point the ns of the pods infra container to a container outside of the pod. Signed-off-by: cdoern <cdoern@redhat.com>
* Podman Pod Create --cpus and --cpuset-cpus flagscdoern2021-06-23
| | | | | | | | | | | | Added logic and handling for two new Podman pod create Flags. --cpus specifies the total number of cores on which the pod can execute, this is a combination of the period and quota for the CPU. --cpuset-cpus is a string value which determines of these available cores, how many we will truly execute on. Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add 'MemUsageBytes' format optionStuart Shelton2021-01-12
| | | | | | | | | | | | | Although storage is more human-readable when expressed in SI units, IEC/JEDEC (Bytes) units are more pertinent for memory-related values (and match the format of the --memory* command-line options). (To prevent possible compatibility issues, the default SI display is left unchanged) See https://github.com/containers/podman/issues/8945 Signed-off-by: Stuart Shelton <stuart@shelton.me>
* Add Networks format placeholder to podman ps and pod psPaul Holzinger2021-01-09
| | | | | | | `podman ps --format {{.Networks}}` will show all connected networks for this container. For `pod ps` it will show the infra container networks. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add support for slirp network for podsAshley Cui2020-09-25
| | | | | | flag --network=slirp4netns[options] for root and rootless pods Signed-off-by: Ashley Cui <acui@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix container and pod create commands for remote createMatthew Heon2020-07-10
| | | | | | | | | | | | | | | | | | | | | | | In `podman inspect` output for containers and pods, we include the command that was used to create the container. This is also used by `podman generate systemd --new` to generate unit files. With remote podman, the generated create commands were incorrect since we sourced directly from os.Args on the server side, which was guaranteed to be `podman system service` (or some variant thereof). The solution is to pass the command along in the Specgen or PodSpecgen, where we can source it from the client's os.Args. This will still be VERY iffy for mixed local/remote use (doing a `podman --remote run ...` on a remote client then a `podman generate systemd --new` on the server on the same container will not work, because the `--remote` flag will slip in) but at the very least the output of `podman inspect` will be correct. We can look into properly handling `--remote` (parsing it out would be a little iffy) in a future PR. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* pod create: add `--infra-conmon-pidfile`Valentin Rothberg2020-06-11
| | | | | | | | | | | Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the infra container's conmon process ID to a specified path. Several container sub-commands already support `--conmon-pidfile` which is especially helpful to allow for systemd to access and track the conmon processes. This allows for easily tracking the conmon process of a pod's infra container. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix Id->ID where possible for lintDaniel J Walsh2020-06-10
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for format {{.Label}}Brent Baude2020-06-01
| | | | | | | | the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented. Fixes #6448 Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add --format to pod inspectBoaz Shuster2020-05-27
| | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* implement pod statsValentin Rothberg2020-04-27
| | | | | | | Implement pod stats for the local and remote client. Both code paths end up in infra/abi to allow for code share. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Cleanup network option parsingDaniel J Walsh2020-04-19
| | | | | | | | | | | | | | | | | | We were not handling the parsing of --ip. This pr adds validation checks and now will support the flag. Move validation to the actual parsing of the network flags. We should only parse the dns flags if the user changed them. We don't want to pass default options if set in containers.conf to the server. Potential for duplicating defaults. Add support for --dns-opt flag passing Begin handling of --network flag, although we don't have a way right now to translate a string into a specgen.Namespace. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add pod prune for api v2.Sujil022020-04-17
| | | | | | | | Add the ability to prune pods for api v2, Includes the addition of force flag, for client side prompt. Update test suite to support this use case. Signed-off-by: Sujil02 <sushah@redhat.com>
* podman v2 remove bloat v2Brent Baude2020-04-16
| | | | | | rid ourseleves of libpod references in v2 client Signed-off-by: Brent Baude <bbaude@redhat.com>
* Fixes for load and other system testsBrent Baude2020-04-13
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* podmanv2 pod inspectSujil022020-04-01
| | | | | | Add the ability to inspect pod in podmanv2 Signed-off-by: Sujil02 <sushah@redhat.com>
* podmanv2 pod psBrent Baude2020-03-31
| | | | | | add the ability to list pods in podmanv2 Signed-off-by: Brent Baude <bbaude@redhat.com>
* podmanv2: implement pod topValentin Rothberg2020-03-28
| | | | | | Implement `podman pod top` for podmanV2. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podmanv2 pod create using podspecgenBrent Baude2020-03-27
| | | | | | | | using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint. also included some code refactoring as it introduced as easy circular import. Signed-off-by: Brent Baude <bbaude@redhat.com>
* podmanv2 pod subcommandsBrent Baude2020-03-26
add pod kill, pause, restart, rm, start, stop, and unpause Signed-off-by: Brent Baude <bbaude@redhat.com>