summaryrefslogtreecommitdiff
path: root/pkg/domain/infra/tunnel
Commit message (Collapse)AuthorAge
* Restart all containers with restart-policy=always on bootBoaz Shuster2021-06-13
| | | | | | | * Add podman-restart systemd unit file and add it to podman RPM package * Fix podman start to filter all containers + unit test Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* Drop container does not exist on removal to debugfDaniel J Walsh2021-05-21
| | | | | | | | | | | | | | | | We have race conditions where a container can be removed by two different processes when running podman --remove rm. It can be cleaned up in the API or by the conmon executing podman container cleanup. When we fail to remove a container that does not exists we should not be printing errors or warnings, we should just debug the fact. [NO TESTS NEEDED] Since this is a race condition it is difficult to test. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for podman manifest rm commandDaniel J Walsh2021-05-19
| | | | | | This is mainly to match command line of Docker. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add restart-policy to container filters & --filter to podman startBoaz Shuster2021-05-06
| | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* Merge pull request #10208 from Luap99/play-kube-macOpenShift Merge Robot2021-05-05
|\ | | | | add --mac-address to podman play kube
| * add --mac-address to podman play kubePaul Holzinger2021-05-04
| | | | | | | | | | | | | | | | | | | | Add a new --mac-address flag to podman play kube. This is used to specify a static MAC address which should be used for the pod. This option can be specified several times because play kube can create more than one pod. Fixes #9731 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | is this a bug?Boaz Shuster2021-05-04
| | | | | | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | Add --all to podman startBoaz Shuster2021-05-03
|/ | | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com> Co-authored-by: Ed Santiago <santiago@redhat.com>
* add --ip to podman play kubePaul Holzinger2021-04-16
| | | | | | | | | | Add a new --ip flag to podman play kube. This is used to specify a static IP address which should be used for the pod. This option can be specified several times because play kube can create more than one pod. Fixes #8442 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #9988 from jmguzik/prune-filters-bindings-netOpenShift Merge Robot2021-04-12
|\ | | | | Add network prune filters support to bindings
| * Add network prune filters support to bindingsJakub Guzik2021-04-10
| | | | | | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* | podman unshare: add --rootless-cni to join the nsPaul Holzinger2021-04-07
|/ | | | | | | | | | Add a new --rootless-cni option to podman unshare to also join the rootless-cni network namespace. This is useful if you want to connect to a rootless container via IP address. This is only possible from the rootless-cni namespace and not from the host namespace. This option also helps to debug problems in the rootless-cni namespace. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add --requires flag to podman run/createMatthew Heon2021-04-06
| | | | | | | | | | | | | | | | | | | | Podman has, for a long time, had an internal concept of dependency management, used mainly to ensure that pod infra containers are started before any other container in the pod. We also have the ability to recursively start these dependencies, which we use to ensure that `podman start` on a container in a pod will not fail because the infra container is stopped. We have not, however, exposed these via the command line until now. Add a `--requires` flag to `podman run` and `podman create` to allow users to manually specify dependency containers. These containers must be running before the container will start. Also, make recursive starting with `podman start` default so we can start these containers and their dependencies easily. Fixes #9250 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #9445 from jmguzik/no-header-info-for-systemd-generationOpenShift Merge Robot2021-02-22
|\ | | | | No header info for systemd generation
| * --no-header flag implementation for generate systemdJakub Guzik2021-02-22
| | | | | | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* | bump go module to v3Valentin Rothberg2021-02-22
|/ | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podman kill should report rawInput not container idDaniel J Walsh2021-02-16
| | | | | | | Docker always reports back the users input, not the full id, we should do the same. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* When stopping a container, print rawInputDaniel J Walsh2021-02-16
| | | | | | | | | | | When we stop a container we are printing the full id, this does not match Docker behaviour or the start behavior. We should be printing the users rawInput when we successfully stop the container. Fixes: https://github.com/containers/podman/issues/9386 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable whitespace linterPaul Holzinger2021-02-11
| | | | | | | | Use the whitespace linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #9125 from ashley-cui/secretswiringOpenShift Merge Robot2021-02-09
|\ | | | | Implement Secrets
| * Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | | | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* | Bump containers/buildah to v1.19.4Daniel J Walsh2021-02-08
| | | | | | | | | | | | Fix handling of --iidfile to happen on the client side. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | add network prunebaude2021-02-06
|/ | | | | | | | | add the ability to prune unused cni networks. filters are not implemented but included both compat and podman api endpoints. Fixes :#8673 Signed-off-by: baude <bbaude@redhat.com>
* Switch podman stop/kill/wait handlers to use abiDaniel J Walsh2021-01-29
| | | | | | | | | | | | Change API Handlers to use the same functions that the local podman uses. At the same time: implement remote API for --all and --ignore flags for podman stop implement remote API for --all flags for podman stop Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #9149 from rhatdan/docsOpenShift Merge Robot2021-01-29
|\ | | | | Podman-remote push can support --format
| * Podman-remote push can support --formatDaniel J Walsh2021-01-29
| | | | | | | | | | | | | | | | Fix man page to document podman push --format fully. Also found that push was not handling the tlsverify so fixed this. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #9133 from rhatdan/pull1OpenShift Merge Robot2021-01-29
|\ \ | |/ |/| Cleanup bindings for image pull
| * Cleanup bindings for image pullDaniel J Walsh2021-01-27
| | | | | | | | | | | | | | | | | | | | Remove bindings that are not handled over the API. Leaving this one to not use image pull, since this would break progress handling. We should revisit this in the future. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #9115 from rhatdan/pullOpenShift Merge Robot2021-01-28
|\ \ | |/ |/| Switch podman image push handlers to use abi
| * Switch podman image push handlers to use abiDaniel J Walsh2021-01-27
| | | | | | | | | | | | | | | | | | | | | | | | Change API Handlers to use the same functions that the local podman uses. At the same time: Cleanup and pass proper bindings. Remove cli options from podman-remote push. Cleanup manifest push. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | podman-remote ps --external --pod --sort do not work.Daniel J Walsh2021-01-27
|/ | | | | | | | | | Fixup the bindings and the handling of the --external --por and --sort flags. The --storage option was renamed --external, make sure we use external up and down the stack. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix --arch and --os flags to work correctlyDaniel J Walsh2021-01-25
| | | | | | | | | | | | | | | Currently podman implements --override-arch and --overide-os But Podman has made these aliases for --arch and --os. No reason to have to specify --override, since it is clear what the user intends. Currently if the user specifies an --override-arch field but the image was previously pulled for a different Arch, podman run uses the different arch. This PR also fixes this issue. Fixes: https://github.com/containers/podman/issues/8001 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman manifest existsPaul Holzinger2021-01-22
| | | | | | Add podman manifest exists command with remote support. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #9027 from Luap99/podman-volume-existsOpenShift Merge Robot2021-01-21
|\ | | | | Podman volume exists
| * podman volume existsPaul Holzinger2021-01-21
| | | | | | | | | | | | Add podman volume exists command with remote support. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Fix handling of container removeDaniel J Walsh2021-01-20
|/ | | | | | | | | | | | | | | | | | | | I found several problems with container remove podman-remote rm --all Was not handled podman-remote rm --ignore Was not handled Return better errors when attempting to remove an --external container. Currently we return the container does not exists, as opposed to container is an external container that is being used. This patch also consolidates the tunnel code to use the same code for removing the container, as the local API, removing duplication of code and potential problems. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #9021 from Luap99/podman-network-existsOpenShift Merge Robot2021-01-19
|\ | | | | podman network exists
| * podman network existsPaul Holzinger2021-01-19
| | | | | | | | | | | | Add podman network exists command with remote support. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Add binding options for container|pod existsbaude2021-01-18
|/ | | | | | | | It turns out an options was added to container exists so it makes sense to have pods and container exists calls have an optional structure for options. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #8942 from rhatdan/pushOpenShift Merge Robot2021-01-17
|\ | | | | Allow podman push to push manifest lists
| * Allow podman push to push manifest listsDaniel J Walsh2021-01-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When doing a podman images, manifests lists look just like images, so it is logical that users would assume that they can just podman push them to a registry. The problem is we throw out weird errors when this happens and users need to somehow figure out this is a manifest list rather then an image, and frankly the user will not understand the difference. This PR will make podman push just do the right thing, by failing over and attempting to push the manifest if it fails to push the image. Fix up handling of manifest push Protocol should bring back a digest string, which can either be printed or stored in a file. We should not reimplement the manifest push setup code in the tunnel code but take advantage of the api path, to make sure remote and local work the same way. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Container rename bindingsPaul Holzinger2021-01-15
|/ | | | | | Add bindings and podman-remote support for container rename. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Initial implementation of renaming containersMatthew Heon2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basic theory: We remove the container, but *only from the DB*. We leave it in c/storage, we leave the lock allocated, we leave it running (if it is). Then we create an identical container with an altered name, and add that back to the database. Theoretically we now have a renamed container. The advantage of this approach is that it doesn't just apply to rename - we can use this to make *any* configuration change to a container that does not alter its container ID. Potential problems are numerous. This process is *THOROUGHLY* non-atomic at present - if you `kill -9` Podman mid-rename things will be in a bad place, for example. Also, we can't rename containers that can't be removed normally - IE, containers with dependencies (pod infra containers, for example). The largest potential improvement will be to move the majority of the work into the DB, with a `RecreateContainer()` method - that will add atomicity, and let us remove the container without worrying about depencies and similar issues. Potential problems: long-running processes that edit the DB and may have an older version of the configuration around. Most notable example is `podman run --rm` - the removal command needed to be manually edited to avoid this one. This begins to get at the heart of me not wanting to do this in the first place... This provides CLI and API implementations for frontend, but no tunnel implementation. It will be added in a future release (just held back for time now - we need this in 3.0 and are running low on time). This is honestly kind of horrifying, but I think it will work. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Reduce general binding binary sizebaude2021-01-13
| | | | | | | | when using the bindings to *only* make a connection, the binary was rough 28MB. This PR reduces it down to 11. There is more work to do but it will come in a secondary PR. Signed-off-by: baude <bbaude@redhat.com>
* Remove the ability to use [name:tag] in podman load commandDaniel J Walsh2021-01-12
| | | | | | | | | | Docker does not support this, and it is confusing what to do if the image has more then one tag. We are dropping support for this in podman 3.0 Fixes: https://github.com/containers/podman/issues/7387 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Rework pruning to report reclaimed spaceBaron Lenardson2020-12-30
| | | | | | | | | | | | This change adds code to report the reclaimed space after a prune. Reclaimed space from volumes, images, and containers is recorded during the prune call in a PruneReport struct. These structs are collected into a slice during a system prune and processed afterwards to calculate the total reclaimed space. Closes #8658 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* add --cidfile to container killbaude2020-12-23
| | | | | | | | | Add the ability to read container ids from one or more files for the kill command. Fixes: #8443 Signed-off-by: baude <bbaude@redhat.com>
* SpellingJosh Soref2020-12-22
| | | | Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
* Merge pull request #8724 from bblenard/support-volume-filters-in-system-pruneOpenShift Merge Robot2020-12-22
|\ | | | | Add volume filters to system prune
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 14:17:07 +0000