summaryrefslogtreecommitdiff
path: root/pkg/domain
Commit message (Collapse)AuthorAge
* handle play kube with pod.spec.hostAliaseszhangguanzhang2020-08-31
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* Merge pull request #7494 from haircommander/play-kube-socketOpenShift Merge Robot2020-08-31
|\ | | | | play kube: handle Socket HostPath type
| * play kube: handle Socket HostPath typePeter Hunt2020-08-28
| | | | | | | | | | | | as well as add test cases for it and the other HostPath types we currently support Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | Add support for variant when pulling imagesDaniel J Walsh2020-08-28
|/ | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* abi: trim init commandGiuseppe Scrivano2020-08-28
| | | | | | | | without it the systemd detection fails. Closes: https://github.com/containers/podman/issues/7441 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* abi: fix detection for systemdGiuseppe Scrivano2020-08-18
| | | | | | | | | create a scope everytime we don't own the current cgroup and we are running on systemd. Closes: https://github.com/containers/podman/issues/6734 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* podman support for IPv6 networksAntonio Ojea2020-08-15
| | | | | | | | | | | podman containers using IPv6 were missing the default route, breaking deployments trying to use them. The problem is that the default route was hardcoded to IPv4, this takes into consideration the podman subnet IP family to generate the corresponding default route. Signed-off-by: Antonio Ojea <aojea@redhat.com>
* Replace deepcopy on history resultsBrent Baude2020-08-11
| | | | | | | | the deepcopy in the remote history code path was throwing an uncaught error on a type mismatch. we now manually do the conversion and fix the type mismatch on the fly. Fixes: #7122 Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #7261 from zhangguanzhang/ps-format-add-fieldOpenShift Merge Robot2020-08-11
|\ | | | | Add the `Status` field in the ps --format=json
| * Add the Status field in the ps --format=jsonzhangguanzhang2020-08-11
| | | | | | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* | Error pass through for more accurate error reportingParker Van Roy2020-08-10
|/ | | | | | Included old error + wrapped Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
* Merge pull request #7223 from mheon/fix_7214OpenShift Merge Robot2020-08-10
|\ | | | | Unconditionally retrieve pod names via API
| * Unconditionally retrieve pod names via APIMatthew Heon2020-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ListContainers API previously had a Pod parameter, which determined if pod name was returned (but, notably, not Pod ID, which was returned unconditionally). This was fairly confusing, so we decided to deprecate/remove the parameter and return it unconditionally. To do this without serious performance implications, we need to avoid expensive JSON decodes of pod configuration in the DB. The way our Bolt tables are structured, retrieving name given ID is actually quite cheap, but we did not expose this via the Libpod API. Add a new GetName API to do this. Fixes #7214 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | generate systemd: fix error handlingValentin Rothberg2020-08-10
|/ | | | | | | | | Fix a bug in the error handling which returned nil instead of an error and ultimately lead to nil dereferences in the client. To prevent future regressions, add a test and check for the error message. Fixes: #7271 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #7215 from vrothberg/flatten-the-curveOpenShift Merge Robot2020-08-08
|\ | | | | images: speed up lists
| * image list: speed upValentin Rothberg2020-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Listing images has shown increasing performance penalties with an increasing number of images. Unless `--all` is specified, Podman will filter intermediate images. Determining intermediate images has been done by finding (and comparing!) parent images which is expensive. We had to query the storage many times which turned it into a bottleneck. Instead, create a layer tree and assign one or more images to nodes that match the images' top layer. Determining the children of an image is now exponentially faster as we already know the child images from the layer graph and the images using the same top layer, which may also be considered child images based on their history. On my system with 510 images, a rootful image list drops from 6 secs down to 0.3 secs. Also use the tree to compute parent nodes, and to filter intermediate images for pruning. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #7220 from baude/issue7124OpenShift Merge Robot2020-08-05
|\ \ | | | | | | podman-remote send name and tag
| * | podman-remote send name and tagBrent Baude2020-08-05
| |/ | | | | | | | | | | | | | | when loading an image with podman-remote load, we need to send a name and a tag to the endpoint Fixes: #7124 Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #7224 from rhatdan/removeOpenShift Merge Robot2020-08-05
|\ \ | | | | | | Handle podman-remote run --rm
| * | Handle podman-remote run --rmDaniel J Walsh2020-08-04
| |/ | | | | | | | | | | | | | | We need to remove the container after it has exited for podman-remote run --rm commands. If we don't remove this container at this step, we open ourselves up to race conditions. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* / fix bug podman sign storage pathQi Wang2020-08-04
|/ | | | | | | | | - fix the bud podman not using specified --directory as signature storage. - use manifest and image referce to set repo@digest. close #6994 close #6993 Signed-off-by: Qi Wang <qiwan@redhat.com>
* [CI:DOCS] apiv2 fix volumes not inculded fieldQi Wang2020-07-29
| | | | | | Do not use volume from docker since UsageData field is not need. It's nullable in docker API and expensive to add. Signed-off-by: Qi Wang <qiwan@redhat.com>
* Fix `podman image search` missing descriptionRalf Haferkamp2020-07-29
| | | | | | | `podman image search` returned wrong results for the image "Description" as it was mapped to the wrong field ("ID") in the search results. Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
* Add podman image mountDaniel J Walsh2020-07-28
| | | | | | | | | | | | | There are many use cases where you want to just mount an image without creating a container on it. For example you might want to just examine the content in an image after you pull it for security analysys. Or you might want to just use the executables on the image without running it in a container. The image is mounted readonly since we do not want people changing images. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Publish IP from YAML (podman play kube)Ashley Cui2020-07-22
| | | | | | podman play kube didn't set host ip correctly from YAML Signed-off-by: Ashley Cui <acui@redhat.com>
* fix play kube doesn't override dockerfile ENTRYPOINTzhangguanzhang2020-07-22
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* fix: system df error when an image has no namePaul Holzinger2020-07-19
| | | | | | | | | | | | | When an image has no name/tag system df will error because it tries to parse an empty name. This commit makes sure we only parse non empty names and set the repository and tag to "<none>" otherwise. Closes #7015 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* abi: set default umask and rlimitsGiuseppe Scrivano2020-07-17
| | | | | | | | the code got lost in the migration to podman 2.0, reintroduce it. Closes: https://github.com/containers/podman/issues/6989 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* libpod: pass down network optionsGiuseppe Scrivano2020-07-16
| | | | | | do not pass network specific options through the network namespace. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Fix container and pod create commands for remote createMatthew Heon2020-07-10
| | | | | | | | | | | | | | | | | | | | | | | In `podman inspect` output for containers and pods, we include the command that was used to create the container. This is also used by `podman generate systemd --new` to generate unit files. With remote podman, the generated create commands were incorrect since we sourced directly from os.Args on the server side, which was guaranteed to be `podman system service` (or some variant thereof). The solution is to pass the command along in the Specgen or PodSpecgen, where we can source it from the client's os.Args. This will still be VERY iffy for mixed local/remote use (doing a `podman --remote run ...` on a remote client then a `podman generate systemd --new` on the server on the same container will not work, because the `--remote` flag will slip in) but at the very least the output of `podman inspect` will be correct. We can look into properly handling `--remote` (parsing it out would be a little iffy) in a future PR. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* log API: add context to allow for cancellingValentin Rothberg2020-07-09
| | | | | | | | | Add a `context.Context` to the log APIs to allow for cancelling streaming (e.g., via `podman logs -f`). This fixes issues for the remote API where some go routines of the server will continue writing and produce nothing but heat and waste CPU cycles. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #6846 from mheon/fix_pod_errorsOpenShift Merge Robot2020-07-06
|\ | | | | Print errors from individual containers in pods
| * Print errors from individual containers in podsMatthew Heon2020-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The infra/abi code for pods was written in a flawed way, assuming that the map[string]error containing individual container errors was only set when the global error for the pod function was nil; that is not accurate, and we are actually *guaranteed* to set the global error when any individual container errors. Thus, we'd never actually include individual container errors, because the infra code assumed that err being set meant everything failed and no container operations were attempted. We were originally setting the cause of the error to something nonsensical ("container already exists"), so I made a new error indicating that some containers in the pod failed. We can then ignore that error when building the report on the pod operation and actually return errors from individual containers. Unfortunately, this exposed another weakness of the infra code, which was discarding the container IDs. Errors from individual containers are not guaranteed to identify which container they came from, hence the use of map[string]error in the Pod API functions. Rather than restructuring the structs we return from pkg/infra, I just wrapped the returned errors with a message including the ID of the container. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #6838 from mheon/fix_panic_eventsOpenShift Merge Robot2020-07-02
|\ \ | |/ |/| Fix `system service` panic from early hangup in events
| * Fix `system service` panic from early hangup in eventsMatthew Heon2020-07-02
| | | | | | | | | | | | | | | | | | | | | | | | We weren't actually halting the goroutine that sent events, so it would continue sending even when the channel closed (the most notable cause being early hangup - e.g. Control-c on a curl session). Use a context to cancel the events goroutine and stop sending events. Fixes #6805 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | APIv2: Add docker compatible volume endpointsmaybe-sybr2020-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change implements docker compatibile endpoint for interacting with volumes. The code is mostly lifted from the `libpod` API handlers but decodes and constructs data using types defined in the docker API package. Some notable support caveats with the current implementation: * we don't return the nullable `Status` or `UsageData` keys when returning volume information for inspect and create endpoints * we don't support filters when pruning * we return a fixed `0` for the `SpaceReclaimed` key when pruning since we have no insight into how much space was freed from runtime Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
* | Created timestamp returned by imagelist should be in unix formatDaniel J Walsh2020-06-30
|/ | | | | | | | In the API, we are currently returning the image time of creation as a string, in time.Time format. The API is for a 64 bit integer representing Unix time. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #6747 from giuseppe/fix-user-volumesOpenShift Merge Robot2020-06-30
|\ | | | | container: move volume chown after spec generation
| * container: move volume chown after spec generationGiuseppe Scrivano2020-06-29
| | | | | | | | | | | | | | | | | | move the chown for newly created volumes after the spec generation so the correct UID/GID are known. Closes: https://github.com/containers/libpod/issues/5698 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Add support for dangling filter to volumesMatthew Heon2020-06-24
|/ | | | | | | | | The dangling filter determine whether a volume is dangling - IE, it has no containers attached using it. Unlike our other filters, this one is a boolean - must be true or false, not arbitrary values. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6731 from baude/toolboxjsonOpenShift Merge Robot2020-06-23
|\ | | | | Add JSON output field for ps
| * Add JSON output field for psBrent Baude2020-06-23
| | | | | | | | | | | | the toolbox team needs a field in our ps json that represents a human readable time. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | V2 podman system connectionJhon Honce2020-06-23
|/ | | | | | | | | * Implement command * Refactor podman-remote to pull from containers.conf by default * podman-remote defaults to --remote being true * Write podman-system-connection.1.md Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add --preservefds to podman runQi Wang2020-06-19
| | | | | | Add --preservefds to podman run. close https://github.com/containers/libpod/issues/6458 Signed-off-by: Qi Wang <qiwan@redhat.com>
* Allow recursive dependency start with Init()Matthew Heon2020-06-18
| | | | | | | | | | | | | | | | | | | | As part of APIv2 Attach, we need to be able to attach to freshly created containers (in ContainerStateConfigured). This isn't something Libpod is interested in supporting, so we use Init() to get the container into ContainerStateCreated, in which attach is possible. Problem: Init() will fail if dependencies are not started, so a fresh container in a fresh pod will fail. The simplest solution is to extend the existing recursive start code from Start() to Init(), allowing dependency containers to be started when we initialize the container (optionally, controlled via bool). Also, update some comments in container_api.go to make it more clear how some of our major API calls work. Fixes #6646 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #6634 from baude/v2buildfixesOpenShift Merge Robot2020-06-17
|\ | | | | fix misc remote build issues
| * fix misc remote build issuesBrent Baude2020-06-17
| | | | | | | | | | | | | | | | | | address problem when multiple -t were sent. and rework remote build's tarball if a context dir is given other than ".". Fixes: #6578 Fixes: #6577 Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #6630 from ashley-cui/masterOpenShift Merge Robot2020-06-17
|\ \ | | | | | | Show Anon, GID, UID in v2 volumes
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-10-20 13:04:49 +0000