summaryrefslogtreecommitdiff
path: root/pkg/domain
Commit message (Collapse)AuthorAge
* Merge pull request #6415 from vrothberg/systemd-new-podOpenShift Merge Robot2020-06-11
|\ | | | | podman-generate-systemd --new for pods
| * generate systemd: wrap pod/ctr lookup errorsValentin Rothberg2020-06-11
| | | | | | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * generate systemd: refactorValentin Rothberg2020-06-11
| | | | | | | | | | | | | | | | | | | | | | | | Refactor the systemd-unit generation code and move all the logic into `pkg/systemd/generate`. The code was already hard to maintain but I found it impossible to wire the `--new` logic for pods in all the chaos. The code refactoring in this commit will make maintaining the code easier and should make it easier to extend as well. Further changes and refactorings may still be needed but they will easier. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * generate systemd: rephrase lookup errorValentin Rothberg2020-06-11
| | | | | | | | | | | | | | | | | | Rephrase the lookup error when the specified name or ID does not refer to a container or pod. Until, only the pod-lookup error has been returned which can be confusing when actually looking for a container; a user might have just mistyped the ID or name. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * pod create: add `--infra-conmon-pidfile`Valentin Rothberg2020-06-11
| | | | | | | | | | | | | | | | | | | | | | Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the infra container's conmon process ID to a specified path. Several container sub-commands already support `--conmon-pidfile` which is especially helpful to allow for systemd to access and track the conmon processes. This allows for easily tracking the conmon process of a pod's infra container. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * podman-pod{rm,start,stop}: support --pod-id-fileValentin Rothberg2020-06-11
| | | | | | | | | | | | | | | | | | | | Support the `--pod-id-file` flag in the rm, start and stop pod commands. This completes the already support flag in pod-create and is another prerequisite for generating generic systemd unit files for pods. Also add completions, docs and tests. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #6569 from giuseppe/create-slice-only-systemdOpenShift Merge Robot2020-06-11
|\ \ | | | | | | podman: create scope only if --cgroup-manager=systemd
| * | podman: create scope only if --cgroup-manager=systemdGiuseppe Scrivano2020-06-11
| |/ | | | | | | | | | | | | | | | | drop check for current cgroup ownership if the cgroup manager is not set to systemd. Closes: https://github.com/containers/libpod/issues/4483 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #6256 from theunrealgeek/play_kube_deploymentOpenShift Merge Robot2020-06-11
|\ \ | |/ |/| Support k8s Deployment in play kube
| * Fix missing doc for field in PlayKubePodtheunrealgeek2020-06-04
| | | | | | | | Signed-off-by: Aditya Kamath <theunrealgeek@gmail.com>
| * Update comment related to seccomp profiles in play kubetheunrealgeek2020-06-03
| | | | | | | | Signed-off-by: Aditya Kamath <theunrealgeek@gmail.com>
| * Fix existing teststheunrealgeek2020-06-02
| | | | | | | | Signed-off-by: Aditya Kamath <theunrealgeek@gmail.com>
| * Modify PlayKubeReport to preserve pod->container mappingtheunrealgeek2020-06-02
| | | | | | | | Signed-off-by: Aditya Kamath <theunrealgeek@gmail.com>
| * supporting k8s Deployment objectstheunrealgeek2020-06-02
| | | | | | | | Signed-off-by: Aditya Kamath <theunrealgeek@gmail.com>
* | Merge pull request #6546 from rhatdan/lintOpenShift Merge Robot2020-06-10
|\ \ | | | | | | Turn on golint
| * | Fix Id->ID where possible for lintDaniel J Walsh2020-06-10
| | | | | | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
| * | Fixup issues found by golintDaniel J Walsh2020-06-10
| | | | | | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Ensure signal validation happens first in pod killMatthew Heon2020-06-09
|/ / | | | | | | | | | | | | | | | | | | | | | | | | This fixes an error in the system tests, which expect that when you try and kill a nonexistent pod with an incorrect signal, you receive an error about the signal, not the pod. At the same time, fix a missing return statement in the bindings, which could also have caused us grief. Fixes #6540 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Add parallel operation to `podman stop`Matthew Heon2020-06-05
| | | | | | | | | | | | | | | | | | | | | | | | This is the other command that benefits greatly from being run in parallel, due to the potential 15-second timeout for containers that ignore SIGTERM. While we're at it, also clean up how stop timeout is set. This needs to be an optional parameter, so that the value set when the container is created with `--stop-timeout` will be respected. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Add parallel execution code for container operationsMatthew Heon2020-06-05
| | | | | | | | | | | | | | | | This code will run container operations in parallel, up to a given maximum number of threads. Currently, it has only been enabled for local `podman rm` as a proof of concept. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #6485 from QiWang19/remote-ignoreOpenShift Merge Robot2020-06-04
|\ \ | | | | | | fix remote test --ignore & turn on more tests
| * | fix remote test --ignore & turn on more testsQi Wang2020-06-03
| | | | | | | | | | | | | | | | | | fix remote test --ignore & turn on more tests Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | Merge pull request #6481 from QiWang19/rm-test-stopOpenShift Merge Robot2020-06-04
|\ \ \ | | | | | | | | turn on remote stop_test
| * | | turn on remote stop_testQi Wang2020-06-03
| | | | | | | | | | | | | | | | | | | | | | | | turn on stop_test --cidfile Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | | Merge pull request #6486 from baude/v2infoaddsocketOpenShift Merge Robot2020-06-04
|\ \ \ \ | | | | | | | | | | add socket information to podman info
| * | | | add socket information to podman infoBrent Baude2020-06-03
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | this is step 1 to self-discovery of remote ssh connections. we add a remotesocket struct to info to detect what the socket path might be. Co-authored-by: Jhon Honce <jhonce@redhat.com> Signed-off-by: Brent Baude <bbaude@redhat.com>
* | | | Merge pull request #6478 from rhatdan/abisupportOpenShift Merge Robot2020-06-03
|\ \ \ \ | | | | | | | | | | Remove use of ABISupport buildtag
| * | | | Remove use of ABISupport buildtagDaniel J Walsh2020-06-03
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to default to building podman. If you specify no build tags you will not build podman, not podman-remote. Just using remote flag to indicate podman-remote and !remote for podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | | When stopping containers locally, ensure cleanup runsMatthew Heon2020-06-03
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cleanup process was already running and ensuring that mounts and networking configuration was cleaned up on container stop, but this was async from the actual `podman stop` command which breaks some expectations - the container is still mounted at the end of `podman stop` and will be cleaned up soon, but not immediately. Fortunately, it's a trivial change to resolve this. Fixes #5747 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | Merge pull request #6469 from jwhonce/wip/authOpenShift Merge Robot2020-06-03
|\ \ \ | | | | | | | | V2 Add support for ssh authentication methods
| * | | V2 Add support for ssh authentication methodsJhon Honce2020-06-03
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * podman --remote ssh://<user>:<password>@<host>:<port><path> * podman --remote ssh://<user>:<password>@<host>:<port><path> \ --identity <path> --passphrase <phrase> * ssh-add <key> podman --remote ssh://<user>@<host><path> * Fix `podman help` to run even if podman missing components * Prompt for passphrase on stdin IFF key is protected and passphrase not given via any other configuration * cobra flags do not support optional value flags therefore refactored --remote to be a boolean and --url will now contain the URI to Podman service Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | | Merge pull request #6473 from mheon/fix_inspect_segfaultOpenShift Merge Robot2020-06-03
|\ \ \ | |/ / |/| | Fix a segfault in `podman inspect -l` w/ no containers
| * | Fix a segfault in `podman inspect -l` w/ no containersMatthew Heon2020-06-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | We also need to rework container/image inspect to be separate, but that can happen in another PR. Fixes #6472 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | Turn on remote rm_test --cidfileQi Wang2020-06-02
| |/ |/| | | | | | | | | Turn on remote rm_test --cidfile Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Enable detached exec for remoteMatthew Heon2020-06-02
|/ | | | | | | | | | | | | | | | | | | | | | | The biggest obstacle here was cleanup - we needed a way to remove detached exec sessions after they exited, but there's no way to tell if an exec session will be attached or detached when it's created, and that's when we must add the exit command that would do the removal. The solution was adding a delay to the exit command (5 minutes), which gives sufficient time for attached exec sessions to retrieve the exit code of the session after it exits, but still guarantees that they will be removed, even for detached sessions. This requires Conmon 2.0.17, which has the new `--exit-delay` flag. As part of the exit command rework, we can drop the hack we were using to clean up exec sessions (remove them as part of inspect). This is a lot cleaner, and I'm a lot happier about it. Otherwise, this is just plumbing - we need a bindings call for detached exec, and that needed to be added to the tunnel mode backend for entities. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add bindings for exec and enable attached remoteMatthew Heon2020-06-01
| | | | | | | | | | | This adds bindings for starting exec sessions, and then uses them to wire up detached exec. Code is heavily based on Attach code for containers, slightly modified to handle exec sessions. Bindings are presently attached-only, detached is pending on a Conmon update landing in CI. I'll probably get to that next. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support for format {{.Label}}Brent Baude2020-06-01
| | | | | | | | the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented. Fixes #6448 Signed-off-by: Brent Baude <bbaude@redhat.com>
* compat handlers: add X-Registry-Auth header supportValentin Rothberg2020-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Support the `X-Registry-Auth` http-request header. * The content of the header is a base64 encoded JSON payload which can either be a single auth config or a map of auth configs (user+pw or token) with the corresponding registries being the keys. Vanilla Docker, projectatomic Docker and the bindings are transparantly supported. * Add a hidden `--registries-conf` flag. Buildah exposes the same flag, mostly for testing purposes. * Do all credential parsing in the client (i.e., `cmd/podman`) pass the username and password in the backend instead of unparsed credentials. * Add a `pkg/auth` which handles most of the heavy lifting. * Go through the authentication-handling code of most commands, bindings and endpoints. Migrate them to the new code and fix issues as seen. A final evaluation and more tests is still required *after* this change. * The manifest-push endpoint is missing certain parameters and should use the ABI function instead. Adding auth-support isn't really possible without these parts working. * The container commands and endpoints (i.e., create and run) have not been changed yet. The APIs don't yet account for the authfile. * Add authentication tests to `pkg/bindings`. Fixes: #6384 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* V2 verify JSON output is consistent and doesn't driftJhon Honce2020-05-28
| | | | | | | $ cd test/apiv2 $ python -m unittest -v test_rest_v1_0_0.TestApi Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add streaming ability to endpointBrent Baude2020-05-27
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #6372 from boaz0/gh_6283OpenShift Merge Robot2020-05-27
|\ | | | | Add --format to pod inspect
| * Add --format to pod inspectBoaz Shuster2020-05-27
| | | | | | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | container stats: fix --no-stream raceValentin Rothberg2020-05-27
|/ | | | | | | | | Fix a race in `podman container stats` by waiting for the client to consume the data in the channel. This requires a `sync.WaitGroup` (or semaphore) in the client and to also close the channel the backend. Fixes: #6405 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #6321 from Luap99/podman-generate-systemd-unit-prefixOpenShift Merge Robot2020-05-25
|\ | | | | Allow to change the generated systemd unit name prefix
| * Added new flags to 'podman generate systemd' to change the unit name prefixLuap992020-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | --container-prefix <string> - default 'container' Systemd unit name prefix for containers --pod-prefix <string> - default 'pod' Systemd unit name prefix for pods --separator <string> - default '-' Systemd unit name seperator between name/id and prefix Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Follow up PR to fix issues found in #6341Daniel J Walsh2020-05-22
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Attempt to turn on additional build testsDaniel J Walsh2020-05-22
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | V2 enable remote logs and testingJhon Honce2020-05-22
| | | | | | | | | | | | | | | | | | | | * wire up bindings and handler for obtaining logs remotely * enable debug logging from podman in e2e test using DEBUG and DEBUG_SERVICE env variables * Fix error in streaming log frames * enable remote logs test Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Removes remote system reset functionality. skip e2e test for remote.Sujil022020-05-22
| | | | | | | | | | | | | | As system reset too dangerous for remote use, deleting the functionality and the test case. Signed-off-by: Sujil02 <sushah@redhat.com>
* | Merge pull request #6327 from baude/v2buildOpenShift Merge Robot2020-05-22
|\ \ | | | | | | v2 podman-remote build