summaryrefslogtreecommitdiff
path: root/pkg/spec
Commit message (Collapse)AuthorAge
* When superceding mounts, check for opposite typesMatthew Heon2019-05-21
| | | | | | | | | | | | | | | | | | | When we supercede low-priority mounts and volumes (image volumes, and volumes sourced from --volumes-from) with higher-priority ones (the --volume and --mount flags), we always replaced lower-priority mounts of the same type (e.g. a user mount to /tmp/test1 would supercede a volumes-from mount to the same destination). However, we did not supercede the opposite type - a named volume from image volumes at /tmp/test1 would be allowed to remain and create a conflict, preventing container creation. Solve this by destroying opposite types before merging (we can't do it in the same loop, as then named volumes, which go second, might trample changes made by mounts). Fixes #3174 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rootless: force resources to be nil on cgroup v1Giuseppe Scrivano2019-05-20
| | | | | | | | | force the resources block to be empty instead of having default values. Regression introduced by 8e88461511e81d2327e4c1a1315bb58fda1827ca Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Don't set apparmor if --priviligedDaniel J Walsh2019-05-20
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* rootless, spec: allow resources with cgroup v2Giuseppe Scrivano2019-05-13
| | | | | | | We were always raising an error when the rootless user attempted to setup resources, but this is not the case anymore with cgroup v2. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add support for retry count with --restart flagMatthew Heon2019-05-03
| | | | | | | | | The on-failure restart option supports restarting only a given number of times. To do this, we need one additional field in the DB to track restart count (which conveniently fills a field in Inspect we weren't populating), plus some plumbing logic. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add container restart policy to Libpod & PodmanMatthew Heon2019-05-03
| | | | | | | This initial version does not support restart count, but it works as advertised otherwise. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2959 from mheon/merge_volume_flagsOpenShift Merge Robot2019-05-03
|\ | | | | Merge volume flags implementation
| * Move handling of ReadOnlyTmpfs into new mounts codeMatthew Heon2019-05-01
| | | | | | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Ensure that named volumes have their options parsedMatthew Heon2019-05-01
| | | | | | | | | | | | | | This involves moving some code out of pkg/spec/ into util/ so it can also be used by libpod. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Add options parsing for tmpfs mountsMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | This ensures that all tmpfs mounts added by the user, even with the --mount flag, share a few common options (nosuid, noexec, nodev), and options for tmpfs mounts are properly validated to ensure they are correct. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Use EqualValues instead of reflect equalityMatthew Heon2019-05-01
| | | | | | | | | | | | | | Same result, but notably better error messages when things go wrong. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Hit a number of to-do comments in unified volumes codeMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | As part of this, move bind mount option validity parsing and modification (adding e.g. rbind on bind mounts that are missing it), which requires test changes (expected values have changed). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Fix options for non-bind and non-tmpfs volumesMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | We were unconditionally resetting volume mount options for all mount points (and by the looks of things, completely dropping tmpfs mounts), which was causing runc to refuse to run containers and all the tests to consequently fail. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Migrate unit tests from cmd/podman into pkg/specMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | | | Several changes made in the interface of pkg/spec make interacting with it without a runtime difficult to impossible, so move the existing limited testing from cmd/podman (which mostly tested pkg/spec) into pkg/spec itself where we can call individual functions that don't break things. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Migrate to unified volume handling codeMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | Unify handling for the --volume, --mount, --volumes-from, --tmpfs and --init flags into a single file and set of functions. This will greatly improve readability and maintainability. Further, properly handle superceding and conflicting mounts. Our current patchwork has serious issues when mounts conflict, or when a mount from --volumes-from or an image volume should be overwritten by a user volume or named volume. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Always pass pod into MakeContainerConfigMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | Play kube was passing the pod, but CreateConfig was not. Unify it so they both do, so we can remove some unnecessary duplicate lookup code. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Remove non-config fields from CreateConfigMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | The goal here is to keep only the configuration directly used to build the container in CreateConfig, and scrub temporary state and helpers that we need to generate. We'll keep those internally in MakeContainerConfig. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Add a new function for converting a CreateConfigMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | | | | | Right now, there are two major API calls necessary to turn a filled-in CreateConfig into the options and OCI spec necessary to make a libpod Container. I'm intending on refactoring both of these extensively to unify a few things, so make a common frontend to both that will prevent API changes from leaking out of the package. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #3031 from baude/remotewindowsOpenShift Merge Robot2019-05-01
|\ \ | |/ |/| enable podman-remote on windows
| * enable podman-remote on windowsbaude2019-04-30
| | | | | | | | | | | | | | build a podman-remote binary for windows that allows users to use the remote client on windows and interact with podman on linux system. Signed-off-by: baude <bbaude@redhat.com>
* | auto pass http_proxy into containerJames Cassell2019-04-30
|/ | | | Signed-off-by: James Cassell <code@james.cassell.me>
* Add --read-only-tmpfs optionsDaniel J Walsh2019-04-26
| | | | | | | | | | | The --read-only-tmpfs option caused podman to mount tmpfs on /run, /tmp, /var/tmp if the container is running int read-only mode. The default is true, so you would need to execute a command like --read-only --read-only-tmpfs=false to turn off this behaviour. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* spec: mask /sys/kernel when bind mounting /sysGiuseppe Scrivano2019-04-11
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* oci: add /sys/kernel to the masked pathsGiuseppe Scrivano2019-04-11
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Drop LocalVolumes from our the databaseMatthew Heon2019-04-04
| | | | | | | | We were never using it. It's actually a potentially quite sizable field (very expensive to decode an array of structs!). Removing it should do no harm. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Major rework of --volumes-from flagMatthew Heon2019-04-04
| | | | | | | | | | The flag should be substantially more durable, and no longer relies on the create artifact. This should allow it to properly handle our new named volume implementation. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add handling for new named volumes code in pkg/specMatthew Heon2019-04-04
| | | | | | | | | Now that named volumes must be explicitly enumerated rather than passed in with all other volumes, we need to split normal and named volumes up before passing them into libpod. This PR does this. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rootless: remove SkipStorageSetup()Giuseppe Scrivano2019-04-01
| | | | | | | | in the few places where we care about skipping the storage initialization, we can simply use the process effective UID, instead of relying on a global boolean flag. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Ensure that we make a netns for CNI non-default netsMatthew Heon2019-03-28
| | | | | | | | | | | | | | | | | We accidentally patched this out trying to enable ns:/path/to/ns This should restore the ability to configure nondefault CNI networks with Podman, by ensuring that they request creation of a network namespace. Completely remove the WithNetNS() call when we do use an explicit namespace from a path. We use that call to indicate that a netns is going to be created - there should not be any question about whether it actually does. Fixes #2795 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Remove ulele/deepcopier in favor of JSON deep copyMatthew Heon2019-03-27
| | | | | | | | | | | | | We have a very high performance JSON library that doesn't need to perform code generation. Let's use it instead of our questionably performant, reflection-dependent deep copy library. Most changes because some functions can now return errors. Also converts cmd/podman to use jsoniter, instead of pkg/json, for increased performance. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Resolve review commentsMatthew Heon2019-03-27
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add --no-hosts flag to disable management of /etc/hostsMatthew Heon2019-03-27
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add for --dns=none to disable creation of resolv.confMatthew Heon2019-03-27
| | | | | | | Support in libpod was added in the previous commit. Wire it into the frontend here. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Need to pass the true paramater with --syslog in cobraDaniel J Walsh2019-03-20
| | | | | | | | | Currently cobra can not handle a boolean option without a vailue. This change fixes an issue if you want syslog information to show up based on the cleanup call. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Vendor docker/docker, fsouza and more #2TomSweeneyRedHat2019-03-13
| | | | | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Vendors in fsouza/docker-client, docker/docker and a few more related. Of particular note, changes to the TweakCapabilities() function from docker/docker along with the parse.IDMappingOptions() function from Buildah. Please pay particular attention to the related changes in the call from libpod to those functions during the review. Passes baseline tests.
* Merge pull request #2562 from baude/healtcheckphase2OpenShift Merge Robot2019-03-12
|\ | | | | healthcheck phase 2
| * healtcheck phase 2baude2019-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | integration of healthcheck into create and run as well as inspect. healthcheck enhancements are as follows: * add the following options to create|run so that non-docker images can define healthchecks at the container level. * --healthcheck-command * --healthcheck-retries * --healthcheck-interval * --healthcheck-start-period * podman create|run --healthcheck-command=none disables healthcheck as described by an image. * the healthcheck itself and the healthcheck "history" can now be observed in podman inspect * added the wiring for healthcheck history which logs the health history of the container, the current failed streak attempts, and log entries for the last five attempts which themselves have start and stop times, result, and a 500 character truncated (if needed) log of stderr/stdout. The timings themselves are not implemented in this PR but will be in future enablement (i.e. next). Signed-off-by: baude <bbaude@redhat.com>
* | Fix SELinux on host shared systems in usernsDaniel J Walsh2019-03-11
|/ | | | | | | | | | | | | Currently if you turn on --net=host on a rootless container and have selinux-policy installed in the image, tools running with SELinux will see that the system is SELinux enabled in rootless mode. This patch mounts a tmpfs over /sys/fs/selinux blocking this behaviour. This patch also fixes the fact that if you shared --pid=host we were not masking over certin /proc paths. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #2412 from QiWang19/iss2380OpenShift Merge Robot2019-03-06
|\ | | | | Enable specifying directory as device on container with --device
| * fix bug --device enable specifying directory as deviceQi Wang2019-03-06
| | | | | | | | Signed-off-by: Qi Wang <qiwan@redhat.com>
* | podman healthcheck run (phase 1)baude2019-03-05
|/ | | | | | | | | Add the ability to manually run a container's healthcheck command. This is only the first phase of implementing the healthcheck. Subsequent pull requests will deal with the exposing the results and history of healthchecks as well as the scheduling. Signed-off-by: baude <bbaude@redhat.com>
* volume: do not create a volume if there is a bindGiuseppe Scrivano2019-02-26
| | | | | | | | | | | if there is already a bind mount specified for the target, do not create a new volume. Regression introduced by 52df1fa7e054d577e8416d1d46db1741ad324d4a Closes: https://github.com/containers/libpod/issues/2441 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #2358 from rhatdan/namespaceOpenShift Merge Robot2019-02-25
|\ | | | | Fix up handling of user defined network namespaces
| * Fix up handling of user defined network namespacesDaniel J Walsh2019-02-23
| | | | | | | | | | | | | | | | | | If user specifies network namespace and the /etc/netns/XXX/resolv.conf exists, we should use this rather then /etc/resolv.conf Also fail cleaner if the user specifies an invalid Network Namespace. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | podman: fix ro bind mounts if no* opts are on the sourceGiuseppe Scrivano2019-02-25
|/ | | | | | | | | | | | | | This is a workaround for the runc issue: https://github.com/opencontainers/runc/issues/1247 If the source of a bind mount has any of nosuid, noexec or nodev, be sure to propagate them to the bind mount so that when runc tries to remount using MS_RDONLY, these options are also used. Closes: https://github.com/containers/libpod/issues/2312 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Fix volume handling in podmanDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix manual detach from containers to not wait for exitMatthew Heon2019-02-12
| | | | | | | | | | | | | | | | | | | | | | | | | At present, when manually detaching from an attached container (using the detach hotkeys, default C-p C-q), Podman will still wait for the container to exit to obtain its exit code (so we can set Podman's exit code to match). This is correct in the case where attach finished because the container exited, but very wrong for the manual detach case. As a result of this, we can no longer guarantee that the cleanup and --rm functions will fire at the end of 'podman run' - we may be exiting before we get that far. Cleanup is easy enough - we swap to unconditionally using the cleanup processes we've used for detached and rootless containers all along. To duplicate --rm we need to also teach 'podman cleanup' to optionally remove containers instead of cleaning them up. (There is an argument for just using 'podman rm' instead of 'podman cleanup --rm', but cleanup does have different semantics given that we only ever expect it to run when the container has just exited. I think it might be useful to keep the two separate for things like 'podman events'...) Signed-off-by: Matthew Heon <mheon@redhat.com>
* cleanup: use the correct runtimeGiuseppe Scrivano2019-02-07
| | | | | | | make sure "containers cleanup" uses the correct runtime if it was overriden. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* rootless: do not override /dev/pts if not neededGiuseppe Scrivano2019-02-06
| | | | | | | | | | when running in rootless mode we were unconditionally overriding /dev/pts to take ride of gid=5. This is not needed when multiple gids are present in the namespace, which is always the case except when running the tests suite with only one mapping. So change it to check how many gids are present before overriding the default mount. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #2142 from giuseppe/expose-portsOpenShift Merge Robot2019-01-20
|\ | | | | rootless: support port redirection from the host
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-01 10:38:13 +0000