aboutsummaryrefslogtreecommitdiff
path: root/pkg/spec
Commit message (Collapse)AuthorAge
* Update c/image to v4.0.1 and buildah to 1.11.3Miloslav Trmač2019-10-04
| | | | | | | | | | | | | | This requires updating all import paths throughout, and a matching buildah update to interoperate. I can't figure out the reason for go.mod tracking github.com/containers/image v3.0.2+incompatible // indirect ((go mod graph) lists it as a direct dependency of libpod, but (go list -json -m all) lists it as an indirect dependency), but at least looking at the vendor subdirectory, it doesn't seem to be actually used in the built binaries. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* rootless: allow cgroupfs manager on cgroups v2Giuseppe Scrivano2019-10-02
| | | | | | | if there are no resources specified, make sure the OCI resources block is empty so that the OCI runtime won't complain. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Handle conflict between volumes and --read-only-tmpfsMatthew Heon2019-09-24
| | | | | | | | | | When a named volume is mounted on any of the tmpfs filesystems created by read-only tmpfs, it caused a conflict that was not resolved prior to this. Fixes BZ1755119 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rootless: Rearrange setup of rootless containersGabi Beyer2019-09-24
| | | | | | | | | | | | | | | In order to run Podman with VM-based runtimes unprivileged, the network must be set up prior to the container creation. Therefore this commit modifies Podman to run rootless containers by: 1. create a network namespace 2. pass the netns persistent mount path to the slirp4netns to create the tap inferface 3. pass the netns path to the OCI spec, so the runtime can enter the netns Closes #2897 Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
* Clean destination paths during mount generationMatthew Heon2019-09-19
| | | | | | | | | | | | | We identify and resolve conflicts in paths using destination path matches. We require exact matches, largely for performance reasons (we use maps to efficiently access, keyed by destination). This usually works fine, until you get mounts that are targetted at /output and /output/ - the same path, but not the same string. Use filepath.Clean() aggressively to try and solve this. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #4034 from rhatdan/relabelOpenShift Merge Robot2019-09-17
|\ | | | | Add 'relabel' to --mount options
| * Add 'relabel' to --mount optionsDaniel J Walsh2019-09-16
| | | | | | | | | | | | | | | | | | Currently if a user specifies a --mount option, their is no way to tell SELinux to relabel the mount point. This patch addes the relabel=shared and relabel=private options. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Check for rootless before checking cgroups version in spec_test.Danila Kiver2019-09-15
| | | | | | | | Signed-off-by: Danila Kiver <danila.kiver@mail.ru>
* | Skip spec_test for rootless envs without cgroup v2.Danila Kiver2019-09-14
|/ | | | Signed-off-by: Danila Kiver <danila.kiver@mail.ru>
* Add support for launching containers without CGroupsMatthew Heon2019-09-10
| | | | | | | This is mostly used with Systemd, which really wants to manage CGroups itself when managing containers via unit file. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #3876 from mheon/fix_mount_flagsOpenShift Merge Robot2019-09-04
|\ | | | | Allow suid, exec, dev mount options to cancel nosuid/noexec/nodev
| * Fix addition of mount options when using RO tmpfsMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | For read-only containers set to create tmpfs filesystems over /run and other common destinations, we were incorrectly setting mount options, resulting in duplicate mount options. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Set base mount options for bind mounts from base systemMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If I mount, say, /usr/bin into my container - I expect to be able to run the executables in that mount. Unconditionally applying noexec would be a bad idea. Before my patches to change mount options and allow exec/dev/suid being set explicitly, we inferred the mount options from where on the base system the mount originated, and the options it had there. Implement the same functionality for the new option handling. There's a lot of performance left on the table here, but I don't know that this is ever going to take enough time to make it worth optimizing. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Don't double-process tmpfs optionsMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | We already process the options on all tmpfs filesystems during final addition of mounts to the spec. We don't need to do it before that in parseVolumes. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
| * Add support for 'exec', 'suid', 'dev' mount flagsMatthew Heon2019-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we explicitly set noexec/nosuid/nodev on every mount, with no ability to disable them. The 'mount' command on Linux will accept their inverses without complaint, though - 'noexec' is counteracted by 'exec', 'nosuid' by 'suid', etc. Add support for passing these options at the command line to disable our explicit forcing of security options. This also cleans up mount option handling significantly. We are still parsing options in more than one place, which isn't good, but option parsing for bind and tmpfs mounts has been unified. Fixes: #3819 Fixes: #3803 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | spec: provide custom implementation for getDevicesGiuseppe Scrivano2019-09-02
| | | | | | | | | | | | | | | | | | | | | | | | provide an implementation for getDevices that skip unreadable directories for the current user. Based on the implementation from runc/libcontainer. Closes: https://github.com/containers/libpod/issues/3919 Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org> Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | spec: do not set devices cgroup when rootlessGiuseppe Scrivano2019-09-02
| | | | | | | | | | | | eBPF requires to be root in the init namespace. Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org>
* | rootless: bind mount devices instead of creating themGiuseppe Scrivano2019-09-02
|/ | | | | | | | | | | when running in rootless mode, --device creates a bind mount from the host instead of specifying the device in the OCI configuration. This is required as an unprivileged user cannot use mknod, even when root in a user namespace. Closes: https://github.com/containers/libpod/issues/3905 Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org>
* Remove --tmpfs size defaultAshley Cui2019-08-14
| | | | | | | Docker has unlimited tmpfs size where Podman had it set to 64mb. Should be standard between the two. Remove noexec default Signed-off-by: Ashley Cui <ashleycui16@gmail.com>
* storage: drop unused geteuid checkGiuseppe Scrivano2019-08-12
| | | | | | it is always running with euid==0 at this point. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #3744 from mheon/fix_commandOpenShift Merge Robot2019-08-08
|\ | | | | When populating CMD, do not include Entrypoint
| * When populating CMD, do not include EntrypointMatthew Heon2019-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we use CreateConfig's Command to populate container Command (which is used as CMD for Inspect and Commit). Unfortunately, CreateConfig's Command is the container's full command, including a prepend of Entrypoint - so we duplicate Entrypoint for images that include it. Maintain a separate UserCommand in CreateConfig that does not include the entrypoint, and use that instead. Fixes #3708 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #3738 from mheon/mount_opts_boolsOpenShift Merge Robot2019-08-08
|\ \ | | | | | | Allow --ro=[true|false] with mount flag
| * | Allow --ro=[true|false] with mount flagMatthew Heon2019-08-07
| |/ | | | | | | | | | | | | | | | | | | | | The 'podman run --mount' flag previously allowed the 'ro' option to be specified, but was missing the ability to set it to a bool (as is allowed by docker). Add that. While we're at it, allow setting 'rw' explicitly as well. Fixes #2980 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | refer to container whose namespace we sharePeter Hunt2019-08-07
| | | | | | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | Properly share UTS namespaces in a podPeter Hunt2019-08-07
|/ | | | | | Sharing a UTS namespace means sharing the hostname. Fix situations where a container in a pod didn't properly share the hostname of the pod. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Revert "rootless: Rearrange setup of rootless containers"baude2019-08-06
| | | | | | This reverts commit 80dcd4bebcdc8e280f6b43228561d09c194c328b. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #3310 from gabibeyer/rootlessKataOpenShift Merge Robot2019-08-05
|\ | | | | rootless: Rearrange setup of rootless containers ***CIRRUS: TEST IMAGES***
| * rootless: Rearrange setup of rootless containersGabi Beyer2019-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to run Podman with VM-based runtimes unprivileged, the network must be set up prior to the container creation. Therefore this commit modifies Podman to run rootless containers by: 1. create a network namespace 2. pass the netns persistent mount path to the slirp4netns to create the tap inferface 3. pass the netns path to the OCI spec, so the runtime can enter the netns Closes #2897 Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
* | Merge pull request #3551 from mheon/fix_memory_leakOpenShift Merge Robot2019-08-02
|\ \ | | | | | | Fix memory leak with exit files
| * | Pass on events-backend config to cleanup processesMatthew Heon2019-08-01
| |/ | | | | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Use buildah/pkg/parse volume parsing rather then internal versionDaniel J Walsh2019-08-01
| | | | | | | | | | | | | | We share this code with buildah, so we should eliminate the podman version. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Vendor in buildah 1.9.2Daniel J Walsh2019-07-30
|/ | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman: support --userns=ns|containerGiuseppe Scrivano2019-07-25
| | | | | | | | allow to join the user namespace of another container. Closes: https://github.com/containers/libpod/issues/3629 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* golangci-lint round #3baude2019-07-21
| | | | | | | this is the third round of preparing to use the golangci-lint on our code base. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #3593 from giuseppe/rootless-privileged-devicesOpenShift Merge Robot2019-07-18
|\ | | | | rootless: add host devices with --privileged
| * rootless: add rw devices with --privilegedGiuseppe Scrivano2019-07-18
| | | | | | | | | | | | | | | | | | when --privileged is specified, add all the devices that are usable by the user. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1730773 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | libpod: support for cgroup namespaceGiuseppe Scrivano2019-07-18
|/ | | | | | | | | | | | | | allow a container to run in a new cgroup namespace. When running in a new cgroup namespace, the current cgroup appears to be the root, so that there is no way for the container to access cgroups outside of its own subtree. By default it uses --cgroup=host to keep the previous behavior. To create a new namespace, --cgroup=private must be provided. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Populate inspect with security-opt settingsMatthew Heon2019-07-17
| | | | | | | | We can infer no-new-privileges. For now, manually populate seccomp (can't infer what file we sourced from) and SELinux/Apparmor (hard to tell if they're enabled or not). Signed-off-by: Matthew Heon <mheon@redhat.com>
* Move the HostConfig portion of Inspect inside libpodMatthew Heon2019-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we first began writing Podman, we ran into a major issue when implementing Inspect. Libpod deliberately does not tie its internal data structures to Docker, and stores most information about containers encoded within the OCI spec. However, Podman must present a CLI compatible with Docker, which means it must expose all the information in 'docker inspect' - most of which is not contained in the OCI spec or libpod's Config struct. Our solution at the time was the create artifact. We JSON'd the complete CreateConfig (a parsed form of the CLI arguments to 'podman run') and stored it with the container, restoring it when we needed to run commands that required the extra info. Over the past month, I've been looking more at Inspect, and refactored large portions of it into Libpod - generating them from what we know about the OCI config and libpod's (now much expanded, versus previously) container configuration. This path comes close to completing the process, moving the last part of inspect into libpod and removing the need for the create artifact. This improves libpod's compatability with non-Podman containers. We no longer require an arbitrarily-formatted JSON blob to be present to run inspect. Fixes: #3500 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* spec: rework --ulimit hostGiuseppe Scrivano2019-07-17
| | | | | | | it seems enough to not specify any ulimit block to maintain the host limits. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #3563 from giuseppe/fix-single-mapping-rootlessOpenShift Merge Robot2019-07-12
|\ | | | | spec: fix userns with less than 5 gids
| * spec: fix userns with less than 5 gidsGiuseppe Scrivano2019-07-12
| | | | | | | | | | | | | | when the container is running in a user namespace, check if gid=5 is available, otherwise drop the option gid=5 for /dev/pts. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #3537 from QiWang19/volumeabsOpenShift Merge Robot2019-07-12
|\ \ | | | | | | fix bug convert volume host path to absolute
| * | fix bug convert volume host path to absoluteQi Wang2019-07-10
| | | | | | | | | | | | | | | | | | fix #3504 If --volume host:dest host is not a named volume, convert the host to a absolute directory path. Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | Merge pull request #3491 from giuseppe/rlimit-hostOpenShift Merge Robot2019-07-11
|\ \ \ | |_|/ |/| | podman: add --ulimit host
| * | podman: add --ulimit hostGiuseppe Scrivano2019-07-08
| |/ | | | | | | | | | | | | | | | | add a simple way to copy ulimit values from the host. if --ulimit host is used then the current ulimits in place are copied to the container. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* / first pass of corrections for golangci-lintbaude2019-07-10
|/ | | | Signed-off-by: baude <bbaude@redhat.com>
* spec: move cgo stuff to their own fileGiuseppe Scrivano2019-07-02
| | | | | | so it can build without cgo since seccomp requires it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* util: drop IsCgroup2UnifiedMode and use it from cgroupsGiuseppe Scrivano2019-06-26
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 12:23:15 +0000