| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
| |
on create, libpod was only creating a new event if the pod had an infra container.
now, pod creation triggers a new pod event with or without infra
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
|
| |
|
|
|
|
|
|
| |
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Restored containers, until now, had the same port mappings as the
original started container. This commit adds the parameter '--publish'
to 'podman container restore' with the same semantic as during
create/run.
With this change it is possible to create a copy from a container with a
'--publish' rule and replace the original '--publish' setting with a new
one.
# podman run -p 2345:8080 container
# podman container checkpoint -l --export=dump.tar
# podman container restore -p 5432:8080 --import=dump.tar
The restored container will now listen on localhost:5432 instead of
localhost:2345 as the original created container.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |
|
|
|
|
|
|
| |
For rootless users the infra container used the slirp4netns net mode
even when bridge was requested. We can support bridge networking for
rootless users so we have allow this. The default is not changed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes #9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
| |
flag --network=slirp4netns[options] for root and rootless pods
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
|
| |
Currently infr-command and --infra-image commands are ignored
from the user. This PR instruments them and adds tests for
each combination.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes #7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
| |
We were accidentally setting incorrect defaults for the network
namespace for rootless `pod create` when infra containers were
not being created. This should resolve that issue.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of this, make a major change to the type we use to
represent port mappings in SpecGen (from using existing OCICNI
structs to using our own custom one). This struct has the
advantage of supporting ranges, massively reducing traffic over
the wire for Podman commands using them (for example, the
`podman run -p 5000-6000` command will now send only one struct
instead of 1000). This struct also allows us to easily validate
which ports are in use, and which are not, which is necessary for
--expose.
Once we have parsed the ports from the new struct, we can produce
an accurate map including all currently requested ports, and use
that to determine what ports need to be exposed (some requested
exposed ports may already be included in a mapping from --publish
and will be ignored) and what open ports on the host we can map
them to.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
|
|
use libpod only in the specgen/generate package so that the remote clients do not inherit libpod bloat.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
