summaryrefslogtreecommitdiff
path: root/pkg/specgen
Commit message (Collapse)AuthorAge
* specgen: fix error messageGiuseppe Scrivano2020-10-30
| | | | | | drop spurious comma. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* new "image" mount typeValentin Rothberg2020-10-29
| | | | | | | | | | | | | | Add a new "image" mount type to `--mount`. The source of the mount is the name or ID of an image. The destination is the path inside the container. Image mounts further support an optional `rw,readwrite` parameter which if set to "true" will yield the mount writable inside the container. Note that no changes are propagated to the image mount on the host (which in any case is read only). Mounts are overlay mounts. To support read-only overlay mounts, vendor a non-release version of Buildah. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* container create: record correct image nameValentin Rothberg2020-10-21
| | | | | | | | | | Record the correct image name when creating a container by using the resolved image name if present. Otherwise, default to using the first available name or an empty string in which case the image must have been referenced by ID. Fixes: #8082 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #8022 from baude/compatapitospecgenOpenShift Merge Robot2020-10-21
|\ | | | | refactor api compatibility container creation to specgen
| * refactor api compatibility container creation to specgenbaude2020-10-20
| | | | | | | | | | | | when using the compatibility layer to create containers, it used code paths to the pkg/spec which is the old implementation of containers. it is error prone and no longer being maintained. rather that fixing things in spec, migrating to specgen usage seems to make the most sense. furthermore, any fixes to the compat create will not need to be ported later. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #8067 from mheon/net_host_hostsOpenShift Merge Robot2020-10-20
|\ \ | |/ |/| Ensure that hostname is added to hosts with net=host
| * Ensure that hostname is added to hosts with net=hostMatthew Heon2020-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a container uses --net=host the default hostname is set to the host's hostname. However, we were not creating any entries in `/etc/hosts` despite having a hostname, which is incorrect. This hostname, for Docker compat, will always be the hostname of the host system, not the container, and will be assigned to IP 127.0.1.1 (not the standard localhost address). Also, when `--hostname` and `--net=host` are both passed, still use the hostname from `--hostname`, not the host's hostname (we still use the host's hostname by default in this case if the `--hostname` flag is not passed). Fixes #8054 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Fix host to container port mapping for simple rangesSascha Grunert2020-10-19
|/ | | | | | | | | | | | | | | | | This fixes the issue that a simple port range should map to a random port range from the host to the container, if no host port range is specified. For example this fails without applying the patch: ``` > podman run -it -p 6000-6066 alpine Error: cannot listen on the TCP port: listen tcp4 :53: bind: address already in use ``` The issue is that only the first port is randomly chosen and all following in the range start by 0 and increment. This is now fixed by tracking the ranges and then incrementing the random port if necessary. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Merge pull request #7929 from kolyshkin/nits-errOpenShift Merge Robot2020-10-06
|\ | | | | Nits
| * Remove excessive error wrappingKir Kolyshkin2020-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like fails, the error message already contains the file name and the operation that fails, so there is no need to wrap the error with something like "open %s failed". While at it - replace a few places with os.Open, ioutil.ReadAll with ioutil.ReadFile. - replace errors.Wrapf with errors.Wrap for cases where there are no %-style arguments. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* | Support max_size logoptionsDaniel J Walsh2020-10-05
|/ | | | | | | | Docker supports log-opt max_size and so does conmon (ALthough poorly). Adding support for this allows users to at least make sure their containers logs do not become a DOS vector. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add SELinux support for podsDaniel J Walsh2020-10-02
| | | | | | | | | | All containers within a Pod need to run with the same SELinux label, unless overwritten by the user. Also added a bunch of SELinux tests to make sure selinux labels are correct on namespaces. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #7882 from giuseppe/check-for-gids-before-adding-themOpenShift Merge Robot2020-10-02
|\ | | | | libpod: check there are enough gids before adding them
| * rootless: move GetAvailableGids to the rootless pkgGiuseppe Scrivano2020-10-02
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | spec: open fuse with --device .*/fuseGiuseppe Scrivano2020-10-02
|/ | | | | | | | | If the container uses the /dev/fuse device, attempt to load the fuse kernel module first so that nested containers can use it. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1872240 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #7798 from QiWang19/run-manifestOpenShift Merge Robot2020-09-30
|\ | | | | Use local image if input image is a manifest list
| * Use local image if input image is a manifest listQi Wang2020-09-30
| | | | | | | | | | | | If run&create image returns error: image contains manifest list, not a runnable image, find the local image that has digest matching the digest from the list and use the image from local storage for the command. Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Merge pull request #7820 from giuseppe/fix-capabilities-not-rootOpenShift Merge Robot2020-09-30
|\ \ | | | | | | capabilities: always set ambient and inheritable
| * | capabilities: always set ambient and inheritableGiuseppe Scrivano2020-09-30
| |/ | | | | | | | | | | | | | | | | | | | | | | change capabilities handling to reflect what docker does. Bounding: set to caplist Inheritable: set to caplist Effective: if uid != 0 then clear; else set to caplist Permitted: if uid != 0 then clear; else set to caplist Ambient: clear Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* / We already set container=podman environment variableDaniel J Walsh2020-09-29
|/ | | | | | Only need to set container, no need for containers Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #7783 from ashley-cui/slirpOpenShift Merge Robot2020-09-29
|\ | | | | Add support for slirp network for pods
| * Add support for slirp network for podsAshley Cui2020-09-25
| | | | | | | | | | | | flag --network=slirp4netns[options] for root and rootless pods Signed-off-by: Ashley Cui <acui@redhat.com>
* | Ignore containers.conf sysctl when namespaces set to hostDaniel J Walsh2020-09-28
| | | | | | | | | | | | | | | | | | | | | | If user sets namespace to host, then default sysctls need to be ignored that are specific to that namespace. --net=host ignore sysctls that begin with net. --ipc=host ignore fs.mqueue --uts=host ignore kernel.domainname and kernel.hostname Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Fix incorrect parsing of create/run --volumes-fromPaul Holzinger2020-09-20
|/ | | | | | | | | Add a bunch of tests to ensure that --volumes-from works as expected. Also align the podman create and run man page. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Fix podman pod create --infra-command and --infra-imageDaniel J Walsh2020-09-16
| | | | | | | | Currently infr-command and --infra-image commands are ignored from the user. This PR instruments them and adds tests for each combination. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* run/create: record raw imageValentin Rothberg2020-09-15
| | | | | | | | | | | | | | | | | | | | | | Record the user-specified "raw" image name in the SpecGenerator, so we can pass it along to the config when creating a container. We need a separate field as the image name in the generator may be set to the ID of the previously pulled image - ultimately the cause of #7404. Reverting the image name from the ID to the user input would not work since "alpine" for pulling iterates over the search registries in the registries.conf but looking up "alpine" normalizes to "localhost/alpine". Recording the raw-image name directly in the generator was the best of the options I considered as no hidden magic from search registries or normalizations (that may or may not change in the future) can interfere. The auto-update backend enforces that the raw-image name is a fully-qualified reference, so we need to worry about that in the front end. Fixes: #7407 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix up errors found by codespellDaniel J Walsh2020-09-11
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make oom-score-adj actually workDaniel J Walsh2020-09-09
| | | | | | | | | | | During the redesign of podman 2.0, we dropped the support for --oom-score-adj. Test for this flag was bogus and thus passing when it was broken. Basically just need to set the value in the spec. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877187 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix unconfined AppArmor profile usage for unsupported systemsSascha Grunert2020-09-07
| | | | | | | | If we select "unconfined" as AppArmor profile, then we should not error even if the host does not support it at all. This behavior has been fixed and a corresponding e2e test has been added as well. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Merge pull request #7355 from rhatdan/envOpenShift Merge Robot2020-08-28
|\ | | | | Use environment from containers.conf
| * Use environment from containers.confDaniel J Walsh2020-08-28
| | | | | | | | | | | | | | | | | | | | podman needs to use the environment settings in containers.conf when setting up the containers. Also host environment variables should be relative to server side not the client. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #7427 from mheon/update_error_messagesOpenShift Merge Robot2020-08-28
|\ \ | |/ |/| Fix up some error messages
| * Fix up some error messagesMatthew Heon2020-08-27
| | | | | | | | | | | | | | | | | | We have a lot of 'cannot stat %s' errors in our codebase. These are terrible and confusing and utterly useless without context. Add some context to a few of them so we actually know what part of the code is failing. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Switch to containers/common for seccompSascha Grunert2020-08-27
|/ | | | | | | The seccomp/containers-golang library is not maintained any more and we should stick to containers/common. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Merge pull request #7372 from giuseppe/add-unified-configurationOpenShift Merge Robot2020-08-24
|\ | | | | podman: add option --cgroup-conf
| * podman: add option --cgroup-confGiuseppe Scrivano2020-08-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | it allows to manually tweak the configuration for cgroup v2. we will expose some of the options in future as single options (e.g. the new memory knobs), but for now add the more generic --cgroup-conf mechanism for maximum control on the cgroup configuration. OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040 Requires: https://github.com/containers/crun/pull/459 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #7274 from rhatdan/capsOpenShift Merge Robot2020-08-23
|\ \ | |/ |/| In podman 1.* regression on --cap-add
| * In podman 1.* regression on --cap-addDaniel J Walsh2020-08-21
| | | | | | | | | | | | | | | | | | | | | | | | In podman 1.0 if you executed a command like: podman run --user dwalsh --cap-add net_bind_service alpine nc -l 80 It would work, and the user dwalsh would get the capability, in podman 2.0, only root and the binding set gets the capability. This change restores us back to the way podman 1.0 worked. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | error when adding container to pod with network informationBrent Baude2020-08-21
|/ | | | | | | | | | | | because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes: * static IP (v4 and v6) * static mac * ports -p (i.e. -p 8080:80) * exposed ports (i.e. 222-225) * publish ports from image -P Signed-off-by: Brent Baude <bbaude@redhat.com>
* fix podman create/run UTS NS docsPaul Holzinger2020-08-18
| | | | | | | | Add better error message when using `--pod` and `--hostname`. Improve the docs to better explain the uts hostname relation. Add more valid options for the `--uts` flag. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #7283 from mheon/pod_infra_has_exit_cmdOpenShift Merge Robot2020-08-17
|\ | | | | Ensure pod infra containers have an exit command
| * Ensure pod infra containers have an exit commandMatthew Heon2020-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most Libpod containers are made via `pkg/specgen/generate` which includes code to generate an appropriate exit command which will handle unmounting the container's storage, cleaning up the container's network, etc. There is one notable exception: pod infra containers, which are made entirely within Libpod and do not touch pkg/specgen. As such, no cleanup process, network never cleaned up, bad things can happen. There is good news, though - it's not that difficult to add this, and it's done in this PR. Generally speaking, we don't allow passing options directly to the infra container at create time, but we do (optionally) proxy a pre-approved set of options into it when we create it. Add ExitCommand to these options, and set it at time of pod creation using the same code we use to generate exit commands for normal containers. Fixes #7103 Signed-off-by: Matthew Heon <mheon@redhat.com>
* | run, create: add new security-opt proc-optsGiuseppe Scrivano2020-08-12
| | | | | | | | | | | | | | it allows to customize the options passed down to the OCI runtime for setting up the /proc mount. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #7288 from tiran/systemd_local_initOpenShift Merge Robot2020-08-11
|\ \ | |/ |/| Enable systemd mode for /usr/local/sbin/init
| * Use set for systemd commandsChristian Heimes2020-08-11
| | | | | | | | Signed-off-by: Christian Heimes <cheimes@redhat.com>
| * Enable systemd mode for /usr/local/sbin/initChristian Heimes2020-08-11
| | | | | | | | | | | | | | | | | | | | Podman 1.6.2 changed systemd mode auto-detection from commands ending in ``init`` to hard-coded paths ``/sbin/init`` and ``/usr/sbin/init``. This broke FreeIPA container. ``podman run`` and ``podman create`` now activate systemd mode when the command is ``/usr/local/sbin/init``. Fixes: https://github.com/containers/podman/issues/7287 Signed-off-by: Christian Heimes <cheimes@redhat.com>
* | Merge pull request #7269 from openSUSE/seccompOpenShift Merge Robot2020-08-11
|\ \ | | | | | | Allow specifying seccomp profiles for privileged containers
| * | Allow specifying seccomp profiles for privileged containersSascha Grunert2020-08-11
| | | | | | | | | | | | | | | | | | | | | To sync the behavior between AppArmor and seccomp it is now possible to also specify seccomp profiles for privileged containers. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* | | Merge pull request #7239 from rhatdan/workingOpenShift Merge Robot2020-08-11
|\ \ \ | |_|/ |/| | Fix handling of working dir
| * | Fix handling of working dirDaniel J Walsh2020-08-10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buildah and podman build can create images without a working dir. FROM fedora WORKDIR /test If you build this image with caching twice, the second time the image will not have a working dir. Similarly if you execute podman run --workdir /foobar fedora It blows up since the workingdir is not created automatically. Finally there was duplicated code for getting the workingdir out of an image, that this PR removes. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 08:45:30 +0000