summaryrefslogtreecommitdiff
path: root/pkg/specgen
Commit message (Collapse)AuthorAge
* Merge pull request #10383 from rhatdan/kubeOpenShift Merge Robot2021-05-27
|\ | | | | Handle image user and exposed ports in podman play kube
| * Handle image user and exposed ports in podman play kubeDaniel J Walsh2021-05-26
| | | | | | | | | | | | | | | | | | Currently if a user runs an image with a user specified or exposed ports with podman play kube, the fields are ignored. Fixed: https://github.com/containers/podman/issues/9609 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Add the option of Rootless CNI networking by defaultMatthew Heon2021-05-26
|/ | | | | | | | | | | | | | | | | | | When the containers.conf field "NetNS" is set to "Bridge" and the "RootlessNetworking" field is set to "cni", Podman will now handle rootless in the same way it does root - all containers will be joined to a default CNI network, instead of exclusively using slirp4netns. If no CNI default network config is present for the user, one will be auto-generated (this also works for root, but it won't be nearly as common there since the package should already ship a config). I eventually hope to remove the "NetNS=Bridge" bit from containers.conf, but let's get something in for Brent to work with. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #10339 from rhatdan/selinuxOpenShift Merge Robot2021-05-17
|\ | | | | Support automatic labeling of kube volumes
| * Support automatic labeling of kube volumesDaniel J Walsh2021-05-16
| | | | | | | | | | | | | | | | | | | | Allow users to specify options on the volume mount path. This will trigger relabels of user specifies :z,:Z Also will handle User Relabels if the user specifies :U Fixes: https://github.com/containers/podman/issues/9371 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Support uid,gid,mode options for secretsAshley Cui2021-05-17
|/ | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* Kube like pods should share ipc,net,uts by defaultflouthoc2021-05-10
| | | | Signed-off-by: flouthoc <flouthoc.git@gmail.com>
* Merge pull request #10202 from EduardoVega/9763-kube-auto-updateOpenShift Merge Robot2021-05-07
|\ | | | | Add support to preserve auto-update labels in play / generate kube
| * Adds support to preserve auto update labels in generate and play kubeEduardo Vega2021-05-06
| | | | | | | | | | | | In the case of generate kube the auto-update labels will be converted into kube annotations and for play kube they will be converted back to labels since that's what podman understands Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* | Merge pull request #10221 from ashley-cui/envsecOpenShift Merge Robot2021-05-07
|\ \ | |/ |/| Add support for environment variable secrets
| * Add support for environment variable secretsAshley Cui2021-05-06
| | | | | | | | | | | | | | | | Env var secrets are env vars that are set inside the container but not commited to and image. Also support reading from env var when creating a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Merge pull request #10185 from rhatdan/volumeOpenShift Merge Robot2021-05-05
|\ \ | | | | | | Add filepath glob support to --security-opt unmask
| * | Add filepath glob support to --security-opt unmaskDaniel J Walsh2021-05-04
| | | | | | | | | | | | | | | | | | | | | | | | Want to allow users to specify --security-opt unmask=/proc/*. This allows us to run podman within podman more securely, then specifing umask=all, also gives the user more flexibilty. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Merge pull request #10220 from giuseppe/rm-volatileOpenShift Merge Robot2021-05-05
|\ \ \ | | | | | | | | podman: set volatile storage flag for --rm containers
| * | | podman: set volatile storage flag for --rm containersGiuseppe Scrivano2021-05-05
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | volatile containers are a storage optimization that disables *sync() syscalls for the container rootfs. If a container is created with --rm, then automatically set the volatile storage flag as anyway the container won't persist after a reboot or machine crash. [NO TESTS NEEDED] Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* / / migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #10119 from rhatdan/timeoutOpenShift Merge Robot2021-04-27
|\ \ | |/ |/| Add podman run --timeout option
| * Add podman run --timeout optionDaniel J Walsh2021-04-23
| | | | | | | | | | | | | | | | | | This option allows users to specify the maximum amount of time to run before conmon sends the kill signal to the container. Fixes: https://github.com/containers/podman/issues/6412 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #10081 from sjug/cdi_device_libOpenShift Merge Robot2021-04-26
|\ \ | |/ |/| Add support for CDI device configuration
| * Add support for CDI device configurationSebastian Jug2021-04-20
| | | | | | | | | | | | | | | | - Persist CDIDevices in container config - Add e2e test - Log HasDevice error and add additional condition for safety Signed-off-by: Sebastian Jug <seb@stianj.ug>
* | Fixes from make codespellDaniel J Walsh2021-04-21
|/ | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #10041 from chenk008/add_pidfile_flagOpenShift Merge Robot2021-04-19
|\ | | | | Add flag "--pidfile" for podman create/run
| * add flag "--pidfile" for podman create/runwuhua.ck2021-04-16
| | | | | | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* | Ensure mount destination is clean, no trailing slashEduardo Vega2021-04-18
|/ | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* podman play kube apply correct log driverPaul Holzinger2021-04-15
| | | | | | | | | | The --log-driver flag was silently ignored by podman play kube. This regression got introduced during the play kube rework. Unfortunately the test for this was skipped for no good reason. Fixes #10015 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #9754 from mheon/add_depOpenShift Merge Robot2021-04-06
|\ | | | | Add --requires flag to podman run/create
| * Add --requires flag to podman run/createMatthew Heon2021-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman has, for a long time, had an internal concept of dependency management, used mainly to ensure that pod infra containers are started before any other container in the pod. We also have the ability to recursively start these dependencies, which we use to ensure that `podman start` on a container in a pod will not fail because the infra container is stopped. We have not, however, exposed these via the command line until now. Add a `--requires` flag to `podman run` and `podman create` to allow users to manually specify dependency containers. These containers must be running before the container will start. Also, make recursive starting with `podman start` default so we can start these containers and their dependencies easily. Fixes #9250 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Ensure that `--userns=keep-id` sets user in configMatthew Heon2021-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the side-effects of the `--userns=keep-id` command is switching the default user of the container to the UID of the user running Podman (though this can still be overridden by the `--user` flag). However, it did this by setting the UID and GID in the OCI spec, and not by informing Libpod of its intention to switch users via the `WithUser()` option. Because of this, a lot of the code that should have triggered when the container ran with a non-root user was not triggering. In the case of the issue that this fixed, the code to remove capabilities from non-root users was not triggering. Adjust the keep-id code to properly inform Libpod of our intention to use a non-root user to fix this. Also, fix an annoying race around short-running exec sessions where Podman would always print a warning that the exec session had already stopped. Fixes #9919 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Fix pod infra container cni network setupPaul Holzinger2021-04-01
| | | | | | | | | | | | | | | | For rootless users the infra container used the slirp4netns net mode even when bridge was requested. We can support bridge networking for rootless users so we have allow this. The default is not changed. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Add rootless support for cni and --uidmapPaul Holzinger2021-04-01
|/ | | | | | This is supported with the new rootless cni logic. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #9516 from rhatdan/shrinkOpenShift Merge Robot2021-03-29
|\ | | | | [NO TESTS NEEDED] Shrink the size of podman bindings
| * [NO TESTS NEEDED] Shrink the size of podman-remoteDaniel J Walsh2021-03-29
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #9842 from AlbanBedel/play-kube-env-from-secretsOpenShift Merge Robot2021-03-29
|\ \ | |/ |/| Add support for env from secrets in play kube
| * play kube: add support for env vars defined from secretsAlban Bedel2021-03-28
| | | | | | | | | | | | | | | | | | | | Add support for secretRef and secretKeyRef to allow env vars to be set from a secret. As K8S secrets are dictionaries the secret value must be a JSON dictionary compatible with the data field of a K8S secret object. The keys must consist of alphanumeric characters, '-', '_' or '.', and the values must be base64 encoded strings. Signed-off-by: Alban Bedel <albeu@free.fr>
| * play kube: support optional/mandatory env var from config mapAlban Bedel2021-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | In K8S the pod creation fails if an env var reference a non existing config map key. It can be marked as optional, but per default it is mandatory. Podman on the other hand always treat such references as optional. Rework envVarsFrom() and envVarValue() to additionaly return an error and add support for the optional attribute in configMapRef and configMapKeyRef. Signed-off-by: Alban Bedel <albeu@free.fr>
| * play kube: prepare supporting other env source than config mapsAlban Bedel2021-03-28
| | | | | | | | | | | | | | | | | | | | | | Rework envVarsFromConfigMap() and envVarValue() to simplify supporting other env sources than config maps. For this we pass the whole spec generator options struct as parameter instead of just the config maps list. Then we rename envVarsFromConfigMap() to envVarsFrom() and in envVarValue() we reposition the loop over the config maps to only run it when a configMapRef element exists. Signed-off-by: Alban Bedel <albeu@free.fr>
* | Add problematic volume name to kube play error messagesJordan Christiansen2021-03-27
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When kube play fails to create a volume, it should say which volume had the problem so the user doesn't have to guess. For the following pod spec: apiVersion: v1 kind: Pod metadata: name: mypod spec: containers: - name: myfrontend image: nginx volumeMounts: - mountPath: "/var/www/html" name: mypd volumes: - name: mypd hostPath: path: /var/blah podman will now report: Error: failed to create volume "mypd": error in parsing HostPath in YAML: error checking path "/var/blah": stat /var/blah: no such file or directory Signed-off-by: Jordan Christiansen <xordspar0@gmail.com>
* Merge pull request #9816 from jwhonce/wip/namespaceOpenShift Merge Robot2021-03-25
|\ | | | | Correct json encoding field name for Namespace type
| * Correct json field nameJhon Honce2021-03-25
| | | | | | | | | | | | | | | | | | [NO TESTS NEEDED] * When using the Namespace type, the field Value was json encoded with the name "string" vs "value". Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Improvements for machinebaude2021-03-25
| | | | | | | | | | | | clean up ci failures and add appropriate arch,os exclusion tags Signed-off-by: baude <bbaude@redhat.com>
* | introduce podman machinebaude2021-03-25
|/ | | | | | | | | | | | | | | podman machine allows podman to create, manage, and interact with a vm running some form of linux (default is fcos). podman is then configured to be able to interact with the vm automatically. while this is usable on linux, the real push is to get this working on both current apple architectures in macos. Ashley Cui contributed to this PR and was a great help. [NO TESTS NEEDED] Signed-off-by: baude <bbaude@redhat.com>
* security: use the bounding caps with --privilegedGiuseppe Scrivano2021-03-19
| | | | | | | | | when --privileged is used, make sure to not request more capabilities than currently available in the current context. [NO TESTS NEEDED] since it fixes existing tests. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* replace local mount consts with libpod/defineJakub Guzik2021-03-07
| | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Enable cgroupsv2 rw mount via security-opt unmaskJakub Guzik2021-02-28
| | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Add U volume flag to chown source volumesEduardo Vega2021-02-22
| | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Ignore entrypoint=[\"\"]Daniel J Walsh2021-02-17
| | | | | | | | | | | | | We recieved an issue with an image that was built with entrypoint=[""] This blows up on Podman, but works on Docker. When we setup the OCI Runtime, we should drop entrypoint if it is == [""] https://github.com/containers/podman/issues/9377 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable more golangci-lint lintersPaul Holzinger2021-02-12
| | | | | | | | | | | | | | | | | Cleanup the golangci.yml file and enable more linters. `pkg/spec` and `iopodman.io` is history. The vendor directory is excluded by default. The dependencies dir was listed twice. Fix the reported problems in `pkg/specgen` because that was also excluded by `pkg/spec`. Enable the structcheck, typecheck, varcheck, deadcode and depguard linters. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Support annotations from containers.confDaniel J Walsh2021-02-09
| | | | | | | Currently podman does not use the annotations specified in the containers.conf. This PR fixes this. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>