summaryrefslogtreecommitdiff
path: root/pkg/varlinkapi/containers.go
Commit message (Collapse)AuthorAge
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* log API: add context to allow for cancellingValentin Rothberg2020-07-09
| | | | | | | | | Add a `context.Context` to the log APIs to allow for cancelling streaming (e.g., via `podman logs -f`). This fixes issues for the remote API where some go routines of the server will continue writing and produce nothing but heat and waste CPU cycles. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Allow recursive dependency start with Init()Matthew Heon2020-06-18
| | | | | | | | | | | | | | | | | | | | As part of APIv2 Attach, we need to be able to attach to freshly created containers (in ContainerStateConfigured). This isn't something Libpod is interested in supporting, so we use Init() to get the container into ContainerStateCreated, in which attach is possible. Problem: Init() will fail if dependencies are not started, so a fresh container in a fresh pod will fail. The simplest solution is to extend the existing recursive start code from Start() to Init(), allowing dependency containers to be started when we initialize the container (optionally, controlled via bool). Also, update some comments in container_api.go to make it more clear how some of our major API calls work. Fixes #6646 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Fix remote integration for healthchecksBrent Baude2020-05-20
| | | | | | the one remaining test that is still skipped do to missing exec function Signed-off-by: Brent Baude <bbaude@redhat.com>
* v2 podman statsbaude2020-05-05
| | | | Signed-off-by: baude <bbaude@redhat.com>
* Podman V2 birthBrent Baude2020-04-16
| | | | | | remote podman v1 and replace with podman v2. Signed-off-by: Brent Baude <bbaude@redhat.com>
* V2 podman system serviceJhon Honce2020-04-07
| | | | | | | | | | | | | | | * Added support for system service * Enabled linting on the varlinkapi source, needed to support V2 service command * Added support for PODMAN_SOCKET Skip linting deprecated code Rather than introduce bugs by correcting deprecated code, linting the code is being skipped. Code that is being ported into V2 is being checked. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* V2 Move varlink homeJhon Honce2020-03-30
| | | | | | | | * move cmd/podman/varlink/* to pkg/varlink to support podmanV2 refactor * update Makefile * reformatted all impacted code Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add structure for new exec session tracking to DBMatthew Heon2020-03-18
| | | | | | | | | | | | | | | | | | | | | | | As part of the rework of exec sessions, we need to address them independently of containers. In the new API, we need to be able to fetch them by their ID, regardless of what container they are associated with. Unfortunately, our existing exec sessions are tied to individual containers; there's no way to tell what container a session belongs to and retrieve it without getting every exec session for every container. This adds a pointer to the container an exec session is associated with to the database. The sessions themselves are still stored in the container. Exec-related APIs have been restructured to work with the new database representation. The originally monolithic API has been split into a number of smaller calls to allow more fine-grained control of lifecycle. Support for legacy exec sessions has been retained, but in a deprecated fashion; we should remove this in a few releases. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* logs: support --tail 0Giuseppe Scrivano2019-10-31
| | | | | | | | | change the default to -1, so that we can change the semantic of "--tail 0" to not print any existing log line. Closes: https://github.com/containers/libpod/issues/4396 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* rm: add containers eviction with `rm --force`Marco Vedovati2019-09-25
| | | | | | | | | Add ability to evict a container when it becomes unusable. This may happen when the host setup changes after a container creation, making it impossible for that container to be used or removed. Evicting a container is done using the `rm --force` command. Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* Report errors when trying to pause rootless containersDaniel J Walsh2019-09-13
| | | | | | | | If you are running a rootless container on cgroupV1 you can not pause the container. We need to report the proper error if this happens. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Implement healthcheck for remote clientAshley Cui2019-08-19
| | | | | | Previously unimplemented. Works the same way the local one does, except its remote. Signed-off-by: Ashley Cui <ashleycui16@gmail.com>
* varlink endpoint for containerstats requires rootbaude2019-08-12
| | | | | | | | | | | obtaining containerstats requires the use of cgroups. at present, rootless users do not have privileges to create cgroups. add an error message that catches this for the varlink endpoint and return a proper error. Fixes: #3749 Signed-off-by: baude <bbaude@redhat.com>
* Add new exit codes to rm & rmi for running containers & dependenciesDaniel J Walsh2019-08-01
| | | | | | | | | | | | This enables programs and scripts wrapping the podman command to handle 'podman rm' and 'podman rmi' failures caused by paused or running containers or due to images having other child images or dependent containers. These errors are common enough that it makes sense to have a more machine readable way of detecting them than parsing the standard error output. Signed-off-by: Ondrej Zoder <ozoder@redhat.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* refactor to reduce duplicated error parsingPeter Hunt2019-07-23
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* remove unnecessary conversionsPeter Hunt2019-07-23
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* add detach keys support for remotePeter Hunt2019-07-23
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* move editing of exitCode to runtimePeter Hunt2019-07-23
| | | | | | | | | There's no way to get the error if we successfully get an exit code (as it's just printed to stderr instead). instead of relying on the error to be passed to podman, and edit based on the error code, process it on the varlink side instead Also move error codes to define package Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Update e2e tests for remote execPeter Hunt2019-07-23
| | | | | | | including changing -l to the container id and separating a case of setting the env that remote can't handle Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Finish up remote exec implementationPeter Hunt2019-07-23
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Implement conmon execPeter Hunt2019-07-22
| | | | | | | | | | | | | | | | | | | | | | This includes: Implement exec -i and fix some typos in description of -i docs pass failed runtime status to caller Add resize handling for a terminal connection Customize exec systemd-cgroup slice fix healthcheck fix top add --detach-keys Implement podman-remote exec (jhonce) * Cleanup some orphaned code (jhonce) adapt remote exec for conmon exec (pehunt) Fix healthcheck and exec to match docs Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error Use these different errors in branching for exit code in healthcheck and exec Set conmon to use new api version Signed-off-by: Jhon Honce <jhonce@redhat.com> Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Merge pull request #3584 from QiWang19/pssizeOpenShift Merge Robot2019-07-18
|\ | | | | podman-remote make --size optional in ps
| * podman-remote make --size optional in psQi Wang2019-07-18
| | | | | | | | | | | | Close #3578 Add `size` field to PsOpts in podman remote to receive size as an option. Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Move the HostConfig portion of Inspect inside libpodMatthew Heon2019-07-17
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we first began writing Podman, we ran into a major issue when implementing Inspect. Libpod deliberately does not tie its internal data structures to Docker, and stores most information about containers encoded within the OCI spec. However, Podman must present a CLI compatible with Docker, which means it must expose all the information in 'docker inspect' - most of which is not contained in the OCI spec or libpod's Config struct. Our solution at the time was the create artifact. We JSON'd the complete CreateConfig (a parsed form of the CLI arguments to 'podman run') and stored it with the container, restoring it when we needed to run commands that required the extra info. Over the past month, I've been looking more at Inspect, and refactored large portions of it into Libpod - generating them from what we know about the OCI config and libpod's (now much expanded, versus previously) container configuration. This path comes close to completing the process, moving the last part of inspect into libpod and removing the need for the create artifact. This improves libpod's compatability with non-Podman containers. We no longer require an arbitrarily-formatted JSON blob to be present to run inspect. Fixes: #3500 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* libpod removal from main (phase 2)baude2019-06-27
| | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* enable integration tests for remote-clientbaude2019-05-07
| | | | | | | first pass at enabling a swath of integration tests for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* Add an InvalidState varlink error for InitMatthew Heon2019-05-02
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add basic structure of podman init commandMatthew Heon2019-05-01
| | | | | | | | | | | | | As part of this, rework the number of workers used by various Podman tasks to match original behavior - need an explicit fallthrough in the switch statement for that block to work as expected. Also, trivial change to Podman cleanup to work on initialized containers - we need to reset to a different state after cleaning up the OCI runtime. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* enable podman remote topbaude2019-04-25
| | | | | | | add the ability for the remote client to display a container's running processes. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote pause|unpausebaude2019-04-18
| | | | | | | | Add the ability to pause and unpause containers with the remote client. Also turned on the pause tests! Signed-off-by: baude <bbaude@redhat.com>
* Add the ability to attach remotely to a containerbaude2019-04-10
| | | | | | | | | | | | | | | | | | | | | Also, you can now podman-remote run -it. There are some bugs that need to be ironed out but I would prefer to merge this so we can make both progress on start and exec as well as the bugs. * when doing podman-remote run -it foo /bin/bash, you have to press enter to get the prompt to display. with the localized podman, we had to teach it connect to the console first and then start the container so we did not miss anything. * when executing "exit" in the console, we get a hard lockup likely because nobody knows what to do. * custom detach keys are not supported * podman-remote run -it alpine ls does not currently work. only dropping to a shell works. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote psbaude2019-04-09
| | | | | | add the ability to run ps on containers using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote create|runbaude2019-04-08
| | | | | | | | | | | | | | add the ability to create and run containers via the podman-remote client. we now create an intermediate layer from the the create/run cli flags. the intermediate layer can be converted into a createconfig or into a varlink struct. Once transported, the varlink struct can be converted back to an intermediate layer and then to a createconfig. remote terminals are not supported yet. Signed-off-by: baude <bbaude@redhat.com>
* size is optional for container inspectionbaude2019-03-26
| | | | | | | | | | on the remote client, if a user wants to know the rootfs size of a container, a -s should be passed. this corrects a behavior where size was shown by default. Fixes #2765 Signed-off-by: baude <bbaude@redhat.com>
* display logs for multiple containers at the same timebaude2019-03-15
| | | | | | | | | | | | | | add the ability for users to specify more than one container at a time while using podman logs. If more than one container is being displayed, podman will also prepend a shortened container id of the container on the log line. also, enabled the podman-remote logs command during the refactoring of the above ability. fixes issue #2219 Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2534 from jwhonce/wip/remote_waitOpenShift Merge Robot2019-03-06
|\ | | | | Implement podman-remote wait command and container subcommand
| * Implement podman-remote wait command and container subcommandJhon Honce2019-03-06
| | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | podman-remote pod top|statsbaude2019-03-06
|/ | | | | | | this is the final enablement for the pod subcommand. it includes the ability to run podman-remote pod top and stats. Signed-off-by: baude <bbaude@redhat.com>
* Support podman-remote stop container(s)Jhon Honce2019-03-02
| | | | | | | | | | * Clean up adapter code * Add GetContainersByContext to Varlink API * Add missing comments * Restore save command * Restore error type mapping when using varlink Signed-off-by: Jhon Honce <jhonce@redhat.com>
* make remote-client error messaging more robustbaude2019-02-22
| | | | | | | | | the remote-client is currently weak for carrying error messages over the varlink interface and displaying something useful to users and developers for the purposes of debug. this is a starting point to improve that user experience. Signed-off-by: baude <bbaude@redhat.com>
* pod infra container is started before a container in a pod is run, started, ↵Peter Hunt2019-02-15
| | | | | | | | | | or attached. Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod. Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Fix volume handling in podmanDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* varlink: Rename `ContainerInList` to `Container`Lars Karlitski2019-02-12
| | | | | | Container more clearly describes what the type represents. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Remove `NotImplemented` typeLars Karlitski2019-02-12
| | | | | | | | Remove the `NotImplemented` type and comment out the methods that use it. This way we can keep track of the methods that still need to be implemented without committing them to stable API. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* podman-remote import|exportbaude2019-02-05
| | | | | | | | addition of import and export for the podman-remote client. This includes the ability to send and receive files between the remote-client and the "podman" host using an upgraded varlink connection. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote inspectbaude2019-01-18
| | | | | | base enablement of the inspect command. Signed-off-by: baude <bbaude@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-08 00:37:41 +0000