summaryrefslogtreecommitdiff
path: root/pkg/varlinkapi
Commit message (Collapse)AuthorAge
* Merge pull request #2903 from baude/remotegenkubeOpenShift Merge Robot2019-04-12
|\ | | | | podman-remote generate kube
| * podman-remote generate kubebaude2019-04-12
| | | | | | | | | | | | Allow the ability to generate kube YAML from the podman remote-client. Signed-off-by: baude <bbaude@redhat.com>
* | Fixes for podman-remote run and attachbaude2019-04-11
|/ | | | | | | | Fixes the ability to run (create,start) a container and attach to its console correctly. We can now also exit from the console without hanging the remote client. Signed-off-by: baude <bbaude@redhat.com>
* Add the ability to attach remotely to a containerbaude2019-04-10
| | | | | | | | | | | | | | | | | | | | | Also, you can now podman-remote run -it. There are some bugs that need to be ironed out but I would prefer to merge this so we can make both progress on start and exec as well as the bugs. * when doing podman-remote run -it foo /bin/bash, you have to press enter to get the prompt to display. with the localized podman, we had to teach it connect to the console first and then start the container so we did not miss anything. * when executing "exit" in the console, we get a hard lockup likely because nobody knows what to do. * custom detach keys are not supported * podman-remote run -it alpine ls does not currently work. only dropping to a shell works. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote psbaude2019-04-09
| | | | | | add the ability to run ps on containers using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2861 from baude/varlinkimagepanicOpenShift Merge Robot2019-04-08
|\ | | | | Correct varlink pull panic
| * Correct varlink pull panicbaude2019-04-08
| | | | | | | | | | | | | | | | | | | | when pulling a non-existent image via varlink, we had a panic because when we detected a pull error we sent the error over a channel but still tried to deduce the image id on a nil object. Fixes: #2860 Signed-off-by: baude <bbaude@redhat.com>
* | podman-remote create|runbaude2019-04-08
|/ | | | | | | | | | | | | | add the ability to create and run containers via the podman-remote client. we now create an intermediate layer from the the create/run cli flags. the intermediate layer can be converted into a createconfig or into a varlink struct. Once transported, the varlink struct can be converted back to an intermediate layer and then to a createconfig. remote terminals are not supported yet. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote image treebaude2019-04-04
| | | | | | | add the ability for the podman-remote client to be able to print an image tree. Signed-off-by: baude <bbaude@redhat.com>
* add remote-client diffbaude2019-04-03
| | | | | | | the remote client now can run the diff command to report changes, modifications, and deletions in an image or container. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2784 from QiWang19/digestOpenShift Merge Robot2019-03-28
|\ | | | | fix bug remote-podman images --digests
| * fix bug remote-podman images --digestsQi Wang2019-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add `digest` field to Image struct and update API.md Show image digests when using --digests in podman-remote. ``` $ PODMAN_VARLINK_ADDRESS="tcp:127.0.0.1:1234" sudo bin/podman-remote images --digests REPOSITORY TAG DIGEST IMAGE ID CREATED SIZE docker.io/library/alpine latest sha256:d05ecd4520cab5d9e5d877595fb0532aadcd6c90f4bbc837bc11679f704c4c82 5cb3aa00f899 2 weeks ago 5.79 MB docker.io/library/busybox latest sha256:4415a904b1aca178c2450fd54928ab362825e863c0ad5452fd020e92f7a6a47e d8233ab899d4 5 weeks ago 1.42 MB ``` Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Remove ulele/deepcopier in favor of JSON deep copyMatthew Heon2019-03-27
|/ | | | | | | | | | | | | We have a very high performance JSON library that doesn't need to perform code generation. Let's use it instead of our questionably performant, reflection-dependent deep copy library. Most changes because some functions can now return errors. Also converts cmd/podman to use jsoniter, instead of pkg/json, for increased performance. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* size is optional for container inspectionbaude2019-03-26
| | | | | | | | | | on the remote client, if a user wants to know the rootfs size of a container, a -s should be passed. this corrects a behavior where size was shown by default. Fixes #2765 Signed-off-by: baude <bbaude@redhat.com>
* Add "died" eventbaude2019-03-25
| | | | | | | | | | We have a new event for container 'Exited' which has been renamed to 'died'. also removed the stream bool from the varlink endpoint for events because it can be determined by the varlink more value. Signed-off-by: baude <bbaude@redhat.com>
* display logs for multiple containers at the same timebaude2019-03-15
| | | | | | | | | | | | | | add the ability for users to specify more than one container at a time while using podman logs. If more than one container is being displayed, podman will also prepend a shortened container id of the container on the log line. also, enabled the podman-remote logs command during the refactoring of the above ability. fixes issue #2219 Signed-off-by: baude <bbaude@redhat.com>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* Initialize field in InfoHost structJhon Honce2019-03-11
| | | | | | Fixes #2016 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #2534 from jwhonce/wip/remote_waitOpenShift Merge Robot2019-03-06
|\ | | | | Implement podman-remote wait command and container subcommand
| * Implement podman-remote wait command and container subcommandJhon Honce2019-03-06
| | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | podman-remote pod top|statsbaude2019-03-06
|/ | | | | | | this is the final enablement for the pod subcommand. it includes the ability to run podman-remote pod top and stats. Signed-off-by: baude <bbaude@redhat.com>
* Support podman-remote stop container(s)Jhon Honce2019-03-02
| | | | | | | | | | * Clean up adapter code * Add GetContainersByContext to Varlink API * Add missing comments * Restore save command * Restore error type mapping when using varlink Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #2422 from baude/remotepodcreateOpenShift Merge Robot2019-02-25
|\ | | | | podman-remote create|ps
| * podman-remote create|psbaude2019-02-25
| | | | | | | | | | | | | | enable the podman-remote client to be able to create and list pods on a remote system. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #2413 from baude/remotepodstopOpenShift Merge Robot2019-02-24
|\| | | | | Enable more podman-remote pod commands
| * Enable more podman-remote pod commandsbaude2019-02-22
| | | | | | | | | | | | enable pod start, stop, and kill subcommands for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #2404 from baude/remoteerrorsOpenShift Merge Robot2019-02-23
|\ \ | |/ |/| make remote-client error messaging more robust
| * make remote-client error messaging more robustbaude2019-02-22
| | | | | | | | | | | | | | | | | | the remote-client is currently weak for carrying error messages over the varlink interface and displaying something useful to users and developers for the purposes of debug. this is a starting point to improve that user experience. Signed-off-by: baude <bbaude@redhat.com>
* | podman-remote pod inspect|existsbaude2019-02-22
|/ | | | | | | | enable the remote client to be able to inspect a pod. also, bonus of enabling the podman pod exists command which returns a 0 or 1 depending on whether the given pod exists. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote load imagebaude2019-02-21
| | | | | | | enable the ability to load an image into remote storage using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* enable podman-remote pod rmbaude2019-02-21
| | | | | | add the ability to delete a pod from the remote client. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote save [image]baude2019-02-20
| | | | | | | Add the ability to save an image from the remote-host to the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* iopodman.SearchImages: add ImageSearchFilter to Varlink APIValentin Rothberg2019-02-20
| | | | | | | | | | | | Also add some argument checks to the Varlink function to avoid referencing nil pointers, and complement the API.md descriptions. The varlink endpoint can be tested via varlink CLI: $ varlink call -m unix:/run/podman/io.podman/io.podman.SearchImages \ '{"query": "ruby", "limit": 0, "tlsVerify": false, "filter": {}}' Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* image.SearchImages: use SearchFilter typeValentin Rothberg2019-02-20
| | | | | | | Use an `image.SearchFilter` instead of a `[]string` in the SearchImages API. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* SearchImages: extend API with filter parameterValentin Rothberg2019-02-20
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podman-search: refactor code to libpod/image/search.goValentin Rothberg2019-02-20
| | | | | | | | Refactor the image-search logic from cmd/podman/search.go to libpod/image/search.go and update podman-search and the Varlink API to use it. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podman-remote pullbaude2019-02-19
| | | | | | Add status for remote users and podman remote-client pull. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2354 from rhatdan/varlinkOpenShift Merge Robot2019-02-18
|\ | | | | Add registry name to fields returned by varlink image search
| * Add registry name to fields returned by varlink image searchDaniel J Walsh2019-02-15
| | | | | | | | | | | | | | | | | | | | | | Cockpit team wants to list the registry name where the image was found. Also fix up SearchImages code to check if the user specified a registry in his call to use that rather then all the registries, This matches podman search command. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | pod infra container is started before a container in a pod is run, started, ↵Peter Hunt2019-02-15
|/ | | | | | | | | | or attached. Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod. Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Merge pull request #2305 from rhatdan/tlsverifyOpenShift Merge Robot2019-02-15
|\ | | | | Add tlsVerify bool to SearchImage for varlink
| * Add tlsVerify bool to SearchImage for varlinkDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | | | Cockpit wants to be able to search images on systems without tlsverify turned on. tlsverify should be an optional parameter, if not set then we default to the system defaults defined in /etc/containers/registries.conf. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #2332 from baude/remotevolumepruneOpenShift Merge Robot2019-02-14
|\ \ | | | | | | volume prune
| * | enable podman-remote volume prunebaude2019-02-14
| |/ | | | | | | | | | | | | | | | | | | | | | | | | allow users to remotely prune volumes. this is the last volume command for remote enablement. as such, the volume commands are being folded back into main because they are supported for both local and remote clients. also, enable all volume tests that do not use containers as containers are not enabled for the remote client yet. Signed-off-by: baude <bbaude@redhat.com>
* / Fix volume handling in podmanDaniel J Walsh2019-02-14
|/ | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman-remote buildbaude2019-02-13
| | | | | | | add the ability to build images using files local to the remote-client but over a varlink interface to a "remote" server. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote volume inspect|lsbaude2019-02-13
| | | | | | | add the ability to list and inspect volumes using the remote client and varlink Signed-off-by: baude <bbaude@redhat.com>
* podman-remote pushbaude2019-02-13
| | | | | | | | | | enable podman-remote push so that users can push images from a remote client. change in push API to deal with the need to see output over the varlink connection. Signed-off-by: baude <bbaude@redhat.com>
* varlink: Rename `SearchImage` to `SearchImages`Lars Karlitski2019-02-12
| | | | | | | Also rename image result struct to `ImageSearchResult` and make `limit` parameter optional. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Rename `ContainerInList` to `Container`Lars Karlitski2019-02-12
| | | | | | Container more clearly describes what the type represents. Signed-off-by: Lars Karlitski <lars@karlitski.net>