summaryrefslogtreecommitdiff
path: root/pkg
Commit message (Collapse)AuthorAge
* Use cleaned destination path for indexing image volumesMatthew Heon2020-02-17
| | | | | | | | | | | | | | We use filepath.Clean() to remove trailing slashes to ensure that when we supercede image mounts with mounts from --volume and --mount, paths are consistent when we compare. Unfortunately, while we used the cleaned path for the destination in the mount, it was accidentally not used to index the maps that we use to identify what to supercede, so our comparisons might be thrown off by trailing slashes and similar. Fixes #5219 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #5217 from mheon/rework_label_parsingOpenShift Merge Robot2020-02-15
|\ | | | | Rework label parsing
| * Rework label parsingMatthew Heon2020-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We attempted to share all logic for parsing labels and environment variables, which on the surface makes lots of sense (both are formatted key=value so parsing logic should be identical) but has begun to fall apart now that we have added additional logic to environment variable handling. Environment variables that are unset, for example, are looked up against environment variables set for the process. We don't want this for labels, so we have to split parsing logic. Fixes #3854 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #5214 from baude/apiv2loglibpodOpenShift Merge Robot2020-02-14
|\ \ | |/ |/| apiv2 libpod container logs
| * apiv2 libpod container logsBrent Baude2020-02-14
| | | | | | | | | | | | wire up containers logs for libpod side of the house, same as compat. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #5216 from baude/bindingstestcacheOpenShift Merge Robot2020-02-14
|\ \ | | | | | | add caching for binding tests
| * | add caching for binding testsBrent Baude2020-02-14
| |/ | | | | | | | | | | | | | | add the ability to cache images instead of pull them. makes tests faster and less network use when we flip on CI. Also added list images with filter test Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #5207 from rhatdan/selinuxOpenShift Merge Robot2020-02-14
|\ \ | | | | | | Fix SELinux labels of volumes
| * | Fix SELinux labels of volumesDaniel J Walsh2020-02-13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we attempt to label a volume and the file system does not support labeling, then just warn. SELinux may or may not work, on the volume. There is no way to setup a private label on a newly created volume without using the container mountlabel. If we don't have a mount label at the time of creation of the volume, the only option we have is to create a shared label. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #5209 from vrothberg/un-dockerOpenShift Merge Robot2020-02-14
|\ \ | | | | | | Undocker part 1)
| * | add pkg/signalValentin Rothberg2020-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add pkg/signal to deal with parts of signal processing and translating signals from string to numeric representations. The code has been copied from docker/docker (and attributed with the copyright) but been reduced to only what libpod needs (on Linux). Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * | add pkg/capabilitiesValentin Rothberg2020-02-14
| |/ | | | | | | | | | | | | | | | | Add pkg/capabibilities to deal with capabilities. The code has been copied from Docker (and attributed with the copyright) but changed significantly to only do what we really need. The code has also been simplified and will perform better due to removed redundancy. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #5203 from QiWang19/disable-detach-keyOpenShift Merge Robot2020-02-14
|\ \ | |/ |/| fix bug "" disable detach keys
| * fix bug "" disable detach keysQi Wang2020-02-13
| | | | | | | | | | | | | | fix #5166 This patch enables `--detach-keys ""` to disable the feature. "ctrl-p, ctrl-q" will not work after this command. Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Merge pull request #5190 from baude/apiv2cockpit3OpenShift Merge Robot2020-02-14
|\ \ | | | | | | filtering behavior correction
| * | filtering behavior correctionBrent Baude2020-02-12
| | | | | | | | | | | | | | | | | | when filtering containers, if a status= is provided as an input filter, then we should override the all to always be true. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | | Merge pull request #5074 from jwhonce/wip/swagger_endpointOpenShift Merge Robot2020-02-14
|\ \ \ | |_|/ |/| | Add /swagger/ endpoint to serve swagger yaml to clients
| * | Add /swagger/ endpoint to serve swagger yaml to clientsJhon Honce2020-02-04
| | | | | | | | | | | | | | | | | | The provided yaml file will describe the current Podman REST API. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | | Merge pull request #5172 from giuseppe/api-fix-cpu-statsOpenShift Merge Robot2020-02-13
|\ \ \ | | | | | | | | api: fix the CPU stats reported
| * | | stats: add SystemUsageGiuseppe Scrivano2020-02-12
| | | | | | | | | | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
| * | | api: fix the CPU stats reportedGiuseppe Scrivano2020-02-11
| | | | | | | | | | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | | | Fix up play kube to use image dataDaniel J Walsh2020-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | podman play kube was ignoring the imageData.Config Volumes WorkingDir Labels StopSignal Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | | Merge pull request #5183 from giuseppe/rootlessport-avoid-hangOpenShift Merge Robot2020-02-13
|\ \ \ \ | | | | | | | | | | rootlessport: fix potential hang
| * | | | rootlessport: drop Pdeathsig in favor of KillGiuseppe Scrivano2020-02-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there is a race condition where the child process is immediately killed: [pid 2576752] arch_prctl(0x3001 /* ARCH_??? */, 0x7ffdf612f170) = -1 EINVAL (Invalid argument) [pid 2576752] access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) [pid 2576752] --- SIGTERM {si_signo=SIGTERM, si_code=SI_USER, si_pid=2576742, si_uid=0} --- [pid 2576752] +++ killed by SIGTERM +++ this happens because the parent process here really means the "parent thread". Since there is no way of running it on the main thread, let's skip this functionality altogether and use kill(2). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
| * | | | rootlessport: fix potential hangGiuseppe Scrivano2020-02-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | write to the error pipe only in case of an error. Otherwise we may end up in a race condition in the select statement below as the read from errChan happens before initComplete and the function returns immediately nil. Closes: https://github.com/containers/libpod/issues/5182 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | | | | Merge pull request #5152 from QiWang19/device-cgroup-ruleOpenShift Merge Robot2020-02-13
|\ \ \ \ \ | |_|_|_|/ |/| | | | support device-cgroup-rule
| * | | | support device-cgroup-ruleQi Wang2020-02-12
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | fix #4876 Add `--device-cgroup-rule` to podman create and run. This enables to add device rules after the container has been created. Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | | Merge pull request #5171 from baude/apiv2cockpit2OpenShift Merge Robot2020-02-12
|\ \ \ \ | | | | | | | | | | Fix container filters
| * | | | Fix container filtersBrent Baude2020-02-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | container filters were being double encoded (maybe triple) which resulted in the wrong encoding representation of filters being sent by the go-bindings. Also, on the server side, Filter needed to be changed to Filter to decode properly. Finally, due to the changed return type of List Containers, the go bindings return values needed to be changed. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | | | | Merge pull request #5187 from vrothberg/pkg-seccompOpenShift Merge Robot2020-02-12
|\ \ \ \ \ | | | | | | | | | | | | add pkg/seccomp
| * | | | | add pkg/seccompValentin Rothberg2020-02-12
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pkg/seccomp to consolidate all seccomp-policy related code which is currently scattered across multiple packages and complicating the creatconfig refactoring. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* / | | | api: pull: fix reference parsingValentin Rothberg2020-02-12
|/ / / / | | | | | | | | | | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | | Merge pull request #5175 from baude/apiv2eventsOpenShift Merge Robot2020-02-12
|\ \ \ \ | | | | | | | | | | apiv2 stream events
| * | | | apiv2 stream eventsBrent Baude2020-02-11
| |/ / / | | | | | | | | | | | | | | | | | | | | the events endpoint should be stream-based. it also needed to be registered to answer and not produce 404s. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | / / HTTP 304 (NotModified) is not an error!Ed Santiago2020-02-11
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even after #5169, my test logs kept showing: ERRO[0004] unable to write json: "http: request method or response status code does not allow body" Cause: overly-helpful code trying to treat condition as an error and include a diagnostic message. This is forbidden per rfc2616. This PR fixes the faulty response, as well as three others found via: $ ack 'Error.*NotMod' (4 hits total) $ ack 'Error.*NoCont' (no hits) Signed-off-by: Ed Santiago <santiago@redhat.com>
* | | Merge pull request #5169 from edsantiago/apiv2_pod_status_codesOpenShift Merge Robot2020-02-11
|\ \ \ | | | | | | | | API v2: pods: fix two incorrect return codes
| * | | API v2: pods: fix two incorrect return codesEd Santiago2020-02-11
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) /pods/<X>/exists - is documented to return 204, and that's the correct value, but until now it has been returning 200. 2) /pods/create - return 409 (conflict), not 500, when pod already exists Also: in WriteResponse(), if code is 204 (No Content) or 304 (Not Modified), emit the status code only but no content-type headers nor content. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | | Merge pull request #5083 from vrothberg/v2-libpod-image-endpointsOpenShift Merge Robot2020-02-11
|\ \ \ | | | | | | | | v2 api: /libpod/images/{import,load,pull}
| * | | swagger: fix /libpod/images/{import,load,pull}Valentin Rothberg2020-02-11
| | | | | | | | | | | | | | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * | | v2 api: /libpod/images/importValentin Rothberg2020-02-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the /libpod/images/import endpoint Tested manually with curl: curl -X POST --data-binary "@image.tar" --header "Content-Type: application/x-tar" Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * | | v2 api: /libpod/images/loadValentin Rothberg2020-02-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the /libpod/images/load endpoint. Tested manually with curl: curl -X POST --data-binary "@image.tar" --header "Content-Type: application/x-tar" Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
| * | | v2 api: /libpod/images/pullValentin Rothberg2020-02-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the /libpod/images/pull endpoint and correct the swagger docs. The reference parameter is mandatory and must either be a c/image/docker/reference or a reference to the "docker://" transport as the pull endpoint is meant to only support pulling images from a registry. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | | Merge pull request #5132 from sujil02/testOpenShift Merge Robot2020-02-11
|\ \ \ \ | |_|/ / |/| | | Add test cases to validate remove and list images api.
| * | | Add test cases to validate remove and list images api.Sujil022020-02-10
| |/ / | | | | | | | | | | | | | | | | | | Includes testcase to validate list image api count as we create and delete images Include testcase to validate remove image api responses with container instance, etc. Signed-off-by: Sujil02 <sushah@redhat.com>
* / / Rewire ListContainers for APIv2 libpodBrent Baude2020-02-11
|/ / | | | | | | | | | | | | | | | | | | consumers of the api remarked how they would prefer a more strongly typed data structure from list containers oon the libpod side of things. for example, events should be consumable and consistent timestamps. also, for the sake of compatibility, it is helpful to have the json named atttributes for Id to not be ID. listcontainers on the libpod side no longer strongly uses the the ps cli to obtain information but we do benefit from turning on the ability to list the last X containers, something CLI does not have yet. we also flipped the bit on defaulting to truncated output in the return. thanks to the efforts of the cockpit team to help us here. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | LibpodAPI.BuildImage: don't require a name for the new imageNalin Dahyabhai2020-02-06
| | | | | | | | | | | | | | | | | | | | When we finish building an image, we try to look up its ID by looking up the image using the name that we were asked to assign to the image. If we weren't asked to assign a name to the image, that would produce an error. The BuildImage() API we're using returns the image's ID anyway, so we can skip the lookup and just return the ID directly. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* | fix swagger docs and make sure docs validation runsBrent Baude2020-02-05
|/ | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #5082 from baude/specOpenShift Merge Robot2020-02-04
|\ | | | | [CI:DOCS] Spec proposal
| * [CI:DOCS]addition of specgen packageBrent Baude2020-02-04
| | | | | | | | | | | | | | | | | | | | warning: the naming of this might change as well as the location. this is a build on a PR from mheon from last year that proposes a shift from our current approach of creating containers based on the arbitrarily made createconfig. the new approach would be to have a specification that is detached from the podman cli. the spec could then be generated and used to make a container. this theoretically is the beginning of a long-needed refactor involving how we get from the cli -> libpod | apiv2 -> libpod with code re-use and less duplication. the intent is to build the apiv2 container creation based on this approach only. wiring to the podman cli will happen after the fact. Signed-off-by: Brent Baude <bbaude@redhat.com>
| * Initial implementation of a spec generator packageMatthew Heon2020-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current Libpod pkg/spec has become a victim of the better part of three years of development that tied it extremely closely to the current Podman CLI. Defaults are spread across multiple places, there is no easy way to produce a CreateConfig that will actually produce a valid container, and the logic for generating configs has sprawled across at least three packages. This is an initial pass at a package that generates OCI specs that will supersede large parts of the current pkg/spec. The CreateConfig will still exist, but will effectively turn into a parsed CLI. This will be compiled down into the new SpecGenerator struct, which will generate the OCI spec and Libpod create options. The preferred integration point for plugging into Podman's Go API to create containers will be the new CreateConfig, as it's less tied to Podman's command line. CRI-O, for example, will likely tie in here. Signed-off-by: Matthew Heon <mheon@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 15:10:08 +0000