summaryrefslogtreecommitdiff
path: root/test/apiv2
Commit message (Collapse)AuthorAge
* Fix filters in image http compat/libpod api endpointsJakub Guzik2021-03-25
| | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Fix containers list/prune http api filter behaviourJakub Guzik2021-03-20
| | | | | | | | | | The problem described in #9711 and followed by #9758 affects containers as well. When user provides wrong filter input, error message should occur, not fallback to full list/prune command. This change fixes the issue. Additionally, there are error message fixes for docker http api compat. Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Fix volumes and networks list/prune filters in http apiJakub Guzik2021-03-19
| | | | | | | | | | | This is the continuation work started in #9711. It turns out that list/prune commands for volumes in libpod/compat api have very dangerous error handling when broken filter input is supplied. Problem also affects network list/prune in libpod. This commit unifies filter handling across libpod/compat api and adds sanity apiv2 testcases. Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Merge pull request #9710 from jmguzik/network-prune-filters-http-apiOpenShift Merge Robot2021-03-18
|\ | | | | Network prune filters for http api (compat and libpod)
| * network prune filters for http compat and libpod apiJakub Guzik2021-03-18
| | | | | | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* | Merge pull request #9711 from jmguzik/volume-prune-fix-http-compatOpenShift Merge Robot2021-03-16
|\ \ | | | | | | Fix for volumes prune in http compat api when using filters
| * | Fix for volumes prune in http compat apiJakub Guzik2021-03-15
| |/ | | | | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* | Merge pull request #9695 from jmguzik/array-inspect-network-fixOpenShift Merge Robot2021-03-16
|\ \ | | | | | | Fix array instead of one elem network http api
| * | Fix array instead of one elem network http apiJakub Guzik2021-03-12
| | | | | | | | | | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* | | Merge pull request #9589 from troyready/add_compat_auth_endpointOpenShift Merge Robot2021-03-16
|\ \ \ | | | | | | | | add /auth for docker compatibility
| * | | fix use with localhost (testing)troyready2021-03-12
| | | | | | | | | | | | | | | | Signed-off-by: troyready <troy@troyready.com>
| * | | add /auth for docker compatibilitytroyready2021-03-12
| | |/ | |/| | | | | | | | | | | | | | | | | | | This endpoint just validates credentials: https://github.com/moby/moby/blob/v20.10.4/api/swagger.yaml#L7936-L7977 Fixes: #9564 Signed-off-by: troyready <troy@troyready.com>
* / | System test cleanupEd Santiago2021-03-15
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - cp test: clean up stray image - build test: add workaround for #9567 (ultra-slow ubuntu). We're seeing CI flakes (timeouts) due to ubuntu 2004 being absurdly slow. Workaround: double our timeout on one specific test when ubuntu + remote. - build test: clean up new copy-from test (from #9275). The test was copy-pasted from buildah system tests, without really adapting for podman environment (e.g. it was using images that we don't use here, and would cause pulls, which will cause flakes). Rewrite test so it references only $IMAGE, remove some confusing/unnecessary stuff, selectively run parts of it even when rootless or remote, and add a test to confirm that copy-from succeeded. - load test: add error-message test to new load-invalid (#9672). Basically, make sure the command fails for the right reason. - play test (kube): use $IMAGE, not alpine; and add pause-image cleanup to teardown() - apiv2 mounts test: add a maintainability comment in a tricky section of code; and tighten up the mount point test. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Delete all containers and pods between testsJhon Honce2021-03-11
| | | | | | | | | | | | New tearDown() deletes all pods and containers between tests Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Merge pull request #9686 from edsantiago/apiv2_jsonifyDaniel J Walsh2021-03-11
|\ \ | |/ |/| apiv2 tests: finally fix POST as originally intended
| * apiv2 tests: finally fix POST as originally intendedEd Santiago2021-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I originally wrote this code I had no idea what POST would look like so I did a sloppy job, deferring making it usable. Now that we have some real-world examples in place, I have a better understanding of what params look like and how to make tests more readable/maintainable. (Deferring isn't always bad: one of my early ideas was to separate params using commas; that would've been a disaster because some JSON values, such as arrays, include commas). This commit implements a better way of dealing with POST: * The main concept is still 'key=value' * When value is a JSON object (dictionary, array), it can be quoted. * Multiple params are simply separated by spaces. The 3-digit HTTP code is a prominent, readable separator between POST params and expected results. The parsing code is a little uglier, but test developers need never see that. The important thing is that writing tests is now easier. * POST params can be empty (this removes the need for a useless '') I snuck in one unrelated change: one of the newly-added tests, .NetworkSettings, was failing when run rootless (which is how I test on my setup). I made it conditional. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #9668 from rhatdan/manOpenShift Merge Robot2021-03-10
|\ \ | | | | | | Document CONTAINERS_CONF/CONTAINERS_STORAGE_CONF Env variables
| * | Document CONTAINERS_CONF/CONTAINERS_STORAGE_CONF Env variablesDaniel J Walsh2021-03-10
| |/ | | | | | | | | | | | | Also Switch to using CONTAINERS_REGISTRIES_CONF for registries.conf overrides. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #9681 from rhatdan/rmOpenShift Merge Robot2021-03-10
|\ \ | |/ |/| Removing a non existing container API should return 404
| * Removing a non existing container API should return 404Daniel J Walsh2021-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we were overwrapping error returned from removal of a non existing container. $ podman rm bogus -f Error: failed to evict container: "": failed to find container "bogus" in state: no container with name or ID bogus found: no such container Removal of wraps gets us to. ./bin/podman rm bogus -f Error: no container with name or ID "bogus" found: no such container Finally also added quotes around container name to help make it standout when you get an error, currently it gets lost in the error. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | apiv2 tests: add helpers to start/stop a local registryEd Santiago2021-03-08
|/ | | | | | | | | | | | | | | | | | | ...and a rudimentary set of /auth tests for PR#9589 (disabled). This simply adds a new start_registry() helper function that allocates a random unused port, pulls a registry image, creates a local certificate + random username + random password, and fires everything up. Since none of this is (yet) used in CI, this is very low risk. The only infinitessimally-risky change is using a dedicated subdirectory of $WORKDIR (instead of $WORKDIR itself) as the podman root. This fixes a dumb oversight on my part: the workdir has grown to be used for much more than just podman root; this change removes clutter and makes it easier for humans to debug in cases of problems. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Correct compat images/{name}/push responseMilivoje Legenovic2021-03-07
| | | | Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
* Merge pull request #9607 from mheon/fix_9523OpenShift Merge Robot2021-03-04
|\ | | | | Respect NanoCpus in Compat Create
| * Respect NanoCpus in Compat CreateMatthew Heon2021-03-04
| | | | | | | | | | | | | | | | | | | | The NanoCpus field in HostConfig was not wired up. It conflicts with CPU period and quota (it hard-codes period to a specific value and then sets the user-specified value as Quota). Fixes #9523 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #9604 from mheon/fix_9510OpenShift Merge Robot2021-03-04
|\ \ | | | | | | Compat API: create volume source dirs on the host
| * | Compat API: create volume source dirs on the hostMatthew Heon2021-03-03
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It took a lot to figure out exactly how this should work, but I think I finally have it. My initial versions of this created the directory with the same owner as the user the container was run with, which was rather complicated - but after review against Docker, I have determined that is incorrect, and it's always made as root:root 0755 (Ubuntu's Docker, which I was using to try and test, is a snap - and as such it was sandboxed, and not actually placing directories it made in a place I could find?). This makes things much easier, since I just need to parse out source directories for binds and ensure they exist. Fixes #9510 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* / Use version package to track all versionsJhon Honce2021-03-03
|/ | | | | | | | | | | | * Server, bindings, and CLI all now pull version information from version package. * Current /libpod API version slaved to podman/libpod Version * Bindings validate against libpod API Minimal version * Remove pkg/bindings/bindings.go and updated tests Fixes: #9207 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #9581 from baude/issue9529OpenShift Merge Robot2021-03-03
|\ | | | | Add network summary to compat ps
| * Add network summary to compat psbaude2021-03-03
| | | | | | | | | | | | | | | | | | The compatibility endpoint for listing containers should have the summarized network configuration with it. Fixes: #9529 Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #9583 from ashley-cui/secOpenShift Merge Robot2021-03-03
|\ \ | | | | | | Add version field to secret compat list/inspect api
| * | Add version field to secret compat list/inspect apiAshley Cui2021-03-02
| |/ | | | | | | | | | | | | | | | | Docker api expects secrets endpoint to have a version field. So, the version field is added into the compat endpoint only. The version field is always 1, since Docker uses the version to keep track of updates to the secret, and currently we cannot update a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Merge pull request #9512 from mheon/fix_9511OpenShift Merge Robot2021-03-02
|\ \ | |/ |/| Fix parsing of Tmpfs field in compat create
| * Fix parsing of Tmpfs field in compat createMatthew Heon2021-02-25
| | | | | | | | | | | | | | | | | | | | | | Create is not formatted as `key=value` but rather `key:value` (technically `path:option1,option2`). As such we can't use the stringMapToArray function, and instead need to generate it manually. Fixes #9511 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Compat api containers/json Ports field is nullMilivoje Legenovic2021-03-02
| | | | | | | | | | | | Fixes #9553 Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
* | Refactor python tests to run against python3.9Jhon Honce2021-03-01
| | | | | | | | | | | | | | | | * Introduce sub-package compat to meet packaging and import requirements * Update documenation for running tests * Add requirements.txt to improve IDE support Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | APIv2 tests: make more maintainableEd Santiago2021-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While I wasn't looking, some completely unreadable cruft crept in here, and it's totally my fault: I never knew you could pass JSON to a GET query. Everyone who DID know that, did so, but had to URL-escape it into a completely gobbledygook mess to make curl happy. Solution: trivial, do the URL-escaping in 't' itself. I just never realized that was needed. I'm so sorry. I hope this helps. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #9531 from Luap99/fix-9526OpenShift Merge Robot2021-03-01
|\ \ | | | | | | compat api network ls accept both format options
| * | compat api network ls accept both format optionsPaul Holzinger2021-02-26
| |/ | | | | | | | | | | | | | | | | | | Docker allows both the old `map[string]map[string]bool` and the newer `map[string][]string` for the filter param so we should too. Fixes #9526 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* / Correct compat images/create?fromImage responseMilivoje Legenovic2021-02-26
|/ | | | Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
* Quote URLNikolay Edigaryev2021-02-18
| | | | Signed-off-by: Nikolay Edigaryev <edigaryev@gmail.com>
* API: fix libpod's container wait endpoint condition conversionNikolay Edigaryev2021-02-18
| | | | Signed-off-by: Nikolay Edigaryev <edigaryev@gmail.com>
* images/create: always pull imageValentin Rothberg2021-02-16
| | | | | | | | | The `images/create` endpoint should always attempt to pull a newer image. Previously, the local images was used which is not compatible with Docker and caused issues in the Gitlab CI. Fixes: #9232 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #9311 from deadNightTiger/fix-pull-dockerjavaOpenShift Merge Robot2021-02-12
|\ | | | | apiv2: handle docker-java clients pulling
| * apiv2: handle docker-java clients pullingIgor Korolev2021-02-11
| | | | | | | | | | | | | | | | | | When docker-java calls images/create?fromImage=x, it expects two things for a successful response: that both "error" and "errorDetail" are not set, and that the "progress" message contains one of five hard-coded strings ("Download complete" being one of them). Signed-off-by: Igor Korolev <missterr@gmail.com>
* | Correct compat network prune responsebaude2021-02-10
|/ | | | | | | | | Correcting the structure of the compat network prune response. They should follow {"NetworksDeleted": [<network_name>",...]} Fixes: #9310 Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #9297 from matejvasek/apiv2_push_get_digestOpenShift Merge Robot2021-02-10
|\ | | | | Docker [APIv2] push sends digest in response body
| * Docker APIv2 push sends digest in response bodyMatej Vasek2021-02-10
| | | | | | | | Signed-off-by: Matej Vasek <mvasek@redhat.com>
* | Merge pull request #9295 from Luap99/fix-9293OpenShift Merge Robot2021-02-10
|\ \ | |/ |/| Fix compat networks endpoint for a empty result
| * Fix compat networks endpoint for a empty resultPaul Holzinger2021-02-09
| | | | | | | | | | | | | | | | | | The networks list compat api endpoint must return `[]` and not `null` if no networks are found. Fixes #9293 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Merge pull request #9289 from edsantiago/apiv2_test_fixesOpenShift Merge Robot2021-02-09
|\ \ | | | | | | apiv2 test fixes
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 20:16:37 +0000