summaryrefslogtreecommitdiff
path: root/test/e2e/checkpoint_test.go
Commit message (Collapse)AuthorAge
* fix podman container restore without CreateNetNSPaul Holzinger2022-05-31
| | | | | | | | | | | | | | | | When a container does not use the default podman netns, for example --network none or --network ns:/path a restore would fail because the specgen check validates that c.config.StaticMAC is nil but the unmarshaller sets it to an empty slice. While we could make the check use len() > 0 I feel like it is more common to check with != nil for ip and mac addresses. Adding omitempty tag makes the json marshal/unmarshal work correctly. This should not cause any issues. Fixes #14389 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* enable errcheck linterPaul Holzinger2022-04-29
| | | | | | | | The errcheck linter makes sure that errors are always check and not ignored by accident. It spotted a lot of unchecked errors, mostly in the tests but also some real problem in the code. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Ginkgo: use HaveField() for better error checkingEd Santiago2022-04-28
| | | | | | | | | | | | | This is a very late followup to my ginkgo-improving work of 2021. It has been stuck since December because it requires gomega 1.17, which we've just enabled. This commit is simply a copy-paste of a command I saved in my TODO list many months ago: sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go Signed-off-by: Ed Santiago <santiago@redhat.com>
* enable staticcheck linterPaul Holzinger2022-04-22
| | | | | | | Fix many problems reported by the staticcheck linter, including many real bugs! Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* fix a number of errcheck issuesValentin Rothberg2022-03-22
| | | | | | Numerous issues remain, especially in tests/e2e. Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Fix checkpoint/restore pod testsAdrian Reber2022-02-11
| | | | | | | | | Checkpoint/restore pod tests are not running with an older runc and now that runc 1.1.0 appears in the repositories it was detected that the tests were failing. This was not detected in CI as CI was not using runc 1.1.0 yet. Signed-off-by: Adrian Reber <areber@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Error out early if system does not support pre-copy checkpointingAdrian Reber2021-12-23
| | | | | | | | | | | | | | | | | | | CRIU's pre-copy migration support relies on the soft dirty page tracking in the Linux kernel: https://www.kernel.org/doc/Documentation/vm/soft-dirty.txt This functionality is not implemented for all architectures and it can also be turned off in the kernel. CRIU can check if the combination of architecture/kernel/CRIU supports the soft dirty page tracking and exports this feature checking functionality in go-criu. This commit adds an early check if the user selects pre-copy checkpointing to error out if the system does not support it. Signed-off-by: Adrian Reber <areber@redhat.com>
* e2e: Add dev/shm checkpoint/restore testRadostin Stoyanov2021-12-23
| | | | Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
* Test for checkpoint specific inspect fieldsAdrian Reber2021-12-17
| | | | | | | | This extends one of the checkpoint/restore tests to see if the newly introduced checkpoint specific fields in 'inspect' work as intended. Signed-off-by: Adrian Reber <areber@redhat.com>
* Use HaveLen(x) instead of Expect(len(y)).To(Equal(x))Ed Santiago2021-12-02
| | | | | | sed -i -e 's/Expect(len(\(.*\)))\.To(Equal(\(.*\)))/Expect(\1).To(HaveLen(\2))/' test/e2e/*.go Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e: yet more cleanup of BeTrue/BeFalseEd Santiago2021-11-30
| | | | | | Thanks to Paul for teaching me about HaveKey() Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: more cleanup of BeTrue()sEd Santiago2021-11-30
| | | | | | | | | | Write a BeValidJSON() matcher, and replace IsJSONOutputValid(): sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go (Plus a few manual tweaks) Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: enable golintEd Santiago2021-11-29
| | | | | | ...and fix problems found therewith. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: clean up antihelpful BeTrue()sEd Santiago2021-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Many ginkgo tests have been written to use this evil form: GrepString("foo") Expect(that to BeTrue()) ...which yields horrible useless messages on failure: false is not true Identify those (automatically, via script) and convert to: Expect(output to ContainSubstring("foo")) ...which yields: "this output" does not contain substring "foo" There are still many BeTrue()s left. This is just a start. This is commit 1 of 2. It includes the script I used, and all changes to *.go are those computed by the script. Commit 2 will apply some manual fixes. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add tests for restore runtime verificationAdrian Reber2021-11-19
| | | | | | | | On container restore ensures that the same container runtime is used as during checkpointing and it also ensures that the user does not select a different runtime. Signed-off-by: Adrian Reber <areber@redhat.com>
* test: Update error string for --file-locks testRadostin Stoyanov2021-11-19
| | | | | | | | Use a substring matching the end of the error message. Closes: #12366 Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
* Add test for checkpoint/restore with --file-locksRadostin Stoyanov2021-11-18
| | | | Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
* remote checkpoint/restore: more fixesValentin Rothberg2021-11-18
| | | | | | | | | | | | | | | | | * Support `checkpoint --pre-checkpoint` * Support `checkpoint --with-previous` * Disable `restore --import-previous` for the remote client since we had to send two files which in turn would require to tar them up and hence be a breaking change. Podman 4.0 would be the chance and I hope we'll find time before that to remote-restore prettier. Note that I did not run over swagger yet to check whether all parameters are actually documented due to time constraints. Fixes: #12334 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* fix remote checkpoint/restoreValentin Rothberg2021-11-16
| | | | | | | | | Nothing was working before, and it's too much to summarize. To make sure we're not regressing in the future again, enable the remote e2e tests. Fixes: #12007 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Added test for checkpoint/restore --print-statsAdrian Reber2021-11-15
| | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* Test to check for presence of 'stats-dump' in exported checkpointsAdrian Reber2021-11-05
| | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* Allow 'container restore' with '--ipc host'Adrian Reber2021-10-26
| | | | | | | | | | | | | | | | | | Trying to restore a container that was started with '--ipc host' fails with: Error: error creating container storage: ProcessLabel and Mountlabel must either not be specified or both specified We already fixed this exact same error message for containers started with '--privileged'. The previous fix was to check if the to be restored container is a privileged container (c.config.Privileged). Unfortunately this does not work for containers started with '--ipc host'. This commit changes the check for a privileged container to check if both the ProcessLabel and the MountLabel is actually set and only then re-uses those labels. Signed-off-by: Adrian Reber <areber@redhat.com>
* Merge pull request #11955 from adrianreber/2021-10-13-f35-checkpoint-test-fixOpenShift Merge Robot2021-10-15
|\ | | | | Checkpoint/Restore test fixes
| * Checkpoint/Restore test fixesAdrian Reber2021-10-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving to Fedora 35 showed test failures (time outs) in the test "podman checkpoint and restore container with different port mappings" The test starts a container and maps the internal port 6379 to the local port 1234 ('-p 1234:6379') and then tries to connect to localhost:1234 On Fedora 35 this failed and blocked the test because the container was not yet ready. The test was trying to connect to localhost:1234 but nothing was running there. So the error was not checkpointing related. Before trying to connect to the container the test is now waiting for the container to be ready. Another problem with this test and running ginkgo in parallel was that it was possible that the port was already in use. Now for each run a random port is selected to decrease the chance of collisions. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Test-hang fix: Wait for ready + timeout on connect.Chris Evich2021-10-14
|/ | | | | | | | | | | | It was observed during initial F35 testing, this test can cause Ginkgo to "hang" by attempting to connect before the redis is up/listening. Fix this by confirming the ready-state before attempting to connect. Also, force IPv4 and timeout on any connection fault - to allow other tests to run. Thanks to Adrian Reber for help on this and related fixes. Signed-off-by: Chris Evich <cevich@redhat.com>
* Add --time out for podman * rm -f commandsDaniel J Walsh2021-10-04
| | | | | | | | | Add --time flag to podman container rm Add --time flag to podman pod rm Add --time flag to podman volume rm Add --time flag to podman network rm Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add Checkpointed bool to InspectMatthew Heon2021-09-07
| | | | | | | | When inspecting a container, we now report whether the container was stopped by a `podman checkpoint` operation via a new bool in the State portion of inspected, `Checkpointed`. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Added tests for out of and into pod checkpoint and restore supportAdrian Reber2021-07-27
| | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* Prepare CRIU version check to work with multiple versionsAdrian Reber2021-07-27
| | | | | | | | The upcoming commit to support checkpointing out of Pods requires CRIU 3.16. This changes the CRIU version check to support checking for different versions. Signed-off-by: Adrian Reber <areber@redhat.com>
* e2e tests: use Should(Exit()) and ExitWithError()Ed Santiago2021-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e2e test failures are rife with messages like: Expected 1 to equal 0 These make me cry. They're anti-helpful, requiring the reader to dive into the source code to figure out what those numbers mean. Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I don't know if it spits out a better diagnostic (I have no way to run e2e tests on my laptop), but I have to fantasize that it will, and given the state of our flakes I assume that at least one test will fail and give me the opportunity to see what the error message looks like. THIS IS NOT REVIEWABLE CODE. There is no way for a human to review it. Don't bother. Maybe look at a few random ones for sanity. If you want to really review, here is a reproducer of what I did: cd test/e2e ! positive assertions. The second is the same as the first, ! with the addition of (unnecessary) parentheses because ! some invocations were written that way. The third is BeZero(). perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go ! Same as above, but handles three non-numeric exit codes ! in run_exit_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go ! negative assertions. Difference is the spelling of 'To(Not)', ! 'ToNot', and 'NotTo'. I assume those are all the same. perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go ! negative, old use of BeZero() perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go Run those on a clean copy of main branch (at the same branch point as my PR, of course), then diff against a checked-out copy of my PR. There should be no differences. Then all you have to review is that my replacements above are sane. UPDATE: nope, that's not enough, you also need to add gomega/gexec to the files that don't have it: perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}')) UPDATE 2: hand-edit run_volume_test.go UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places UPDATE 4: skip a test due to bug #10935 (race condition) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #10381 from adrianreber/2021-05-18-publishOpenShift Merge Robot2021-06-07
|\ | | | | Add --publish to container restore
| * Add test for restore --publishAdrian Reber2021-06-04
| | | | | | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* | Added tests for different checkpoint archive compressionsAdrian Reber2021-06-07
|/ | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Initial implementation of volume pluginsMatthew Heon2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements support for mounting and unmounting volumes backed by volume plugins. Support for actually retrieving plugins requires a pull request to land in containers.conf and then that to be vendored, and as such is not yet ready. Given this, this code is only compile tested. However, the code for everything past retrieving the plugin has been written - there is support for creating, removing, mounting, and unmounting volumes, which should allow full functionality once the c/common PR is merged. A major change is the signature of the MountPoint function for volumes, which now, by necessity, returns an error. Named volumes managed by a plugin do not have a mountpoint we control; instead, it is managed entirely by the plugin. As such, we need to cache the path in the DB, and calls to retrieve it now need to access the DB (and may fail as such). Notably absent is support for SELinux relabelling and chowning these volumes. Given that we don't manage the mountpoint for these volumes, I am extremely reluctant to try and modify it - we could easily break the plugin trying to chown or relabel it. Also, we had no less than *5* separate implementations of inspecting a volume floating around in pkg/infra/abi and pkg/api/handlers/libpod. And none of them used volume.Inspect(), the only correct way of inspecting volumes. Remove them all and consolidate to using the correct way. Compat API is likely still doing things the wrong way, but that is an issue for another day. Fixes #4304 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* add pre checkpointunknown2021-01-10
| | | | Signed-off-by: Zhuohan Chen <chen_zhuohan@163.com>
* test: Add checkpoint/restore with volumesRadostin Stoyanov2021-01-07
| | | | Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
* Remove build \!remote flags from testDaniel J Walsh2020-11-18
| | | | | | | | Add some more tests, document cases where remote will not work Add FIXMEs for tests that should work on podman-remote but currently do not. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make all Skips specify a reasonDaniel J Walsh2020-09-29
| | | | | | Always use CGROUPV2 rather then reading from system all the time. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove SkipIfRootless if possible, document other callsDaniel J Walsh2020-09-27
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* e2e: disable checkpoint test on UbuntuValentin Rothberg2020-06-08
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable Ubuntu tests in CIBrent Baude2020-06-08
| | | | | | Add updates required for ubuntu and run integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* checkpoint: change runtime checkpoint support testAdrian Reber2020-04-03
| | | | | | | | | | | | | | | | | Podman was checking if the runtime support checkpointing by running 'runtime checkpoint -h'. That works for runc. crun, however, does not use '-h, --help' for help output but, '-?, --help'. This commit switches both checkpoint support detection from 'runtime checkpoint -h' to 'runtime checkpoint --help'. Podman can now correctly detect if 'crun' also support checkpointing. Signed-off-by: Adrian Reber <areber@redhat.com>
* Correctly export the root file-system changesAdrian Reber2019-12-09
| | | | | | | | | | | | | | | | When doing a checkpoint with --export the root file-system diff was not working as expected. Instead of getting the changes from the running container to the highest storage layer it got the changes from the highest layer to that parent's layer. For a one layer container this could mean that the complete root file-system is part of the checkpoint. With this commit this changes to use the same functionality as 'podman diff'. This actually enables to correctly diff the root file-system including tracking deleted files. This also removes the non-working helper functions from libpod/diff.go. Signed-off-by: Adrian Reber <areber@redhat.com>
* Disable checkpointing of containers started with --rmAdrian Reber2019-11-28
| | | | | | | | | | | | | Trying to checkpoint a container started with --rm works, but it makes no sense as the container, including the checkpoint, will be deleted after writing the checkpoint. This commit inhibits checkpointing containers started with '--rm' unless '--export' is used. If the checkpoint is exported it can easily be restored from the exported checkpoint, even if '--rm' is used. To restore a container from a checkpoint it is even necessary to manually run 'podman rm' if the container is not started with '--rm'. Signed-off-by: Adrian Reber <areber@redhat.com>
* podman: add support for specifying MACJakub Filak2019-11-06
| | | | | | | | I basically copied and adapted the statements for setting IP. Closes #1136 Signed-off-by: Jakub Filak <jakub.filak@sap.com>