summaryrefslogtreecommitdiff
path: root/test/e2e/commit_test.go
Commit message (Collapse)AuthorAge
* Eighty-six eighty-eightyEd Santiago2021-09-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Sorry, couldn't resist). CI flakes have been coming down - thank you to everyone who has been making them a priority. This leaves a noisy subset that I've just been ignoring for months: Running: podman ... -p 8080:something ...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use Sometimes these are one-time errors resolved on 2nd try; sometimes they fail three times, forcing CI user to hit Rerun. In all cases they make noise in my flake logs, which costs me time. My assumption is that this has to do with ginkgo running random tests in parallel. Since many e2e tests simplemindedly use 8080, collisions are inevitable. Solution: simplemindedly replace 8080 with other (also arbitrarily picked) numbers. This is imperfect -- it requires human developers to pick a number NNNN and 'grep NNNN test/e2e/*' before adding new tests, which I am 100% confident ain't gonna happen -- but it's better than what we have now. Side note: I considered writing and using a RandomAvailablePort() helper, but that would still be racy. Plus, it would be a pain to interpolate strings into so many places. Finally, with this hand-tooled approach, if/when we _do_ get conflicts on port NNNN, it should be very easy to grep for NNNN, find the offending tests that reuse that port, and fix one of them. Signed-off-by: Ed Santiago <santiago@redhat.com>
* podman inspect show exposed portsPaul Holzinger2021-08-24
| | | | | | | | | | | | | | Podman inspect has to show exposed ports to match docker. This requires storing the exposed ports in the container config. A exposed port is shown as `"80/tcp": null` while a forwarded port is shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`. Also make sure to add the exposed ports to the new image when the container is commited. Fixes #10777 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* e2e tests: use Should(Exit()) and ExitWithError()Ed Santiago2021-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e2e test failures are rife with messages like: Expected 1 to equal 0 These make me cry. They're anti-helpful, requiring the reader to dive into the source code to figure out what those numbers mean. Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I don't know if it spits out a better diagnostic (I have no way to run e2e tests on my laptop), but I have to fantasize that it will, and given the state of our flakes I assume that at least one test will fail and give me the opportunity to see what the error message looks like. THIS IS NOT REVIEWABLE CODE. There is no way for a human to review it. Don't bother. Maybe look at a few random ones for sanity. If you want to really review, here is a reproducer of what I did: cd test/e2e ! positive assertions. The second is the same as the first, ! with the addition of (unnecessary) parentheses because ! some invocations were written that way. The third is BeZero(). perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go ! Same as above, but handles three non-numeric exit codes ! in run_exit_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go ! negative assertions. Difference is the spelling of 'To(Not)', ! 'ToNot', and 'NotTo'. I assume those are all the same. perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go ! negative, old use of BeZero() perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go Run those on a clean copy of main branch (at the same branch point as my PR, of course), then diff against a checked-out copy of my PR. There should be no differences. Then all you have to review is that my replacements above are sane. UPDATE: nope, that's not enough, you also need to add gomega/gexec to the files that don't have it: perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}')) UPDATE 2: hand-edit run_volume_test.go UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places UPDATE 4: skip a test due to bug #10935 (race condition) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add support for environment variable secretsAshley Cui2021-05-06
| | | | | | | | Env var secrets are env vars that are set inside the container but not commited to and image. Also support reading from env var when creating a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* e2e tests: SkipIfRemote(): add a reasonEd Santiago2020-09-23
| | | | | | | | | | | | | | | | | Now that Dan has added helpful comments to each SkipIfRemote, let's take the next step and include those messages in the Skip() output so someone viewing test results can easily see if a remote test is skipped for a real reason or for a FIXME. This commit is the result of a simple: perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go in the test/e2e directory, with a few minor (manual) changes in wording. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Examine all SkipIfRemote functionsDaniel J Walsh2020-09-22
| | | | | | | | Remove ones that are not needed. Document those that should be there. Document those that should be fixed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* e2e tests: use actual temp dirs, not "/tmp/dir"Ed Santiago2020-08-18
| | | | | | | | | | | | | | | | One of the --iidfile tests was flaking: Error: failed to write image ID to file "/tmp/dir/idFile": open /tmp/dir/idFile: no such file or directory Root cause: test was actually not mkdir'ing /tmp/dir. Test was mostly passing because _other_ tests in the suite were mkdir'ing it, but once in a while this test ran before the others. Solution: fixed this test to use CreateTempDirInTempDir(). And, since hardcoded tempdirs are bad practice, grepped for '"dir"' and fixed all other instances too. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Handle single character imagesDaniel J Walsh2020-07-30
| | | | | | | | | | | | | | | | Currently you can only specify multiple character for image names when executing podman-remote commit podman-remote commit a b Will complete, but will save the image without a name. podman-remote commit a bb Works. This PR fixes and now returns an error if the user doees not specify an image name to commit to. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* govern remote attach and startBrent Baude2020-05-20
| | | | | | fixes a race where container would start before attach could occur resulting in an error. Signed-off-by: Brent Baude <bbaude@redhat.com>
* v2 enable remote integration testsBrent Baude2020-05-19
| | | | | | enable remote integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* V2 tests: enables commit testsQi Wang2020-04-24
| | | | | | V2 tests enables commit tests Signed-off-by: Qi Wang <qiwan@redhat.com>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Implemented --iidfile for podman commitSujil022020-03-19
| | | | | | | Added flag to Write the image ID to the file with podman commit command. Fix to issue #5461 Signed-off-by: Sujil02 <sushah@redhat.com>
* Remove incorrect validation of --change for commitMatthew Heon2020-02-10
| | | | | | | | | | The validation logic was failing on properly-formatted changes. There's already validation in Commit itself, so no need to duplicate. Fixes #5148 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #3081 from baude/remotecommitOpenShift Merge Robot2019-06-03
|\ | | | | podman remote-client commit
| * podman remote-client commitbaude2019-05-30
| | | | | | | | | | | | | | add the ability to commit a container to an image using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* | use imagecaches for local testsbaude2019-05-29
|/ | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* Minor fix splitting env vars in podman-commitDivyansh Kamboj2019-05-19
| | | | | | | | | `string.Split()` splits into slice of size greater than 2 which may result in loss of environment variables fixes #3132 Signed-off-by: Divyansh Kamboj <kambojdivyansh2000@gmail.com>
* Fix podman command --change CMDDaniel J Walsh2019-04-17
| | | | | | | | | | | | | | | | | | Currently in Docker if you commit with --change 'CMD a b c' The command that gets added is [/bin/sh -c "a b c"] If you commit --change 'CMD ["a","b","c"]' You get [a b c] This patch set makes podman match this behaviour. Similar change required for Entrypoint. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --include-volumes flag to 'podman commit'Matthew Heon2019-04-11
| | | | | | | | | | | | | The 'docker commit' will never include a container's volumes when committing, without an explicit request through '--change'. Podman, however, defaulted to including user volumes as image volumes. Make this behavior depend on a new flag, '--include-volumes', and make the default behavior match Docker. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix E2E testsMatthew Heon2019-04-04
| | | | | | | | | | | | | | | | The Commit test is blatantly wrong and testing buggy behavior. We should be commiting the destination, if anything - and more likely nothing at all. When force-removing volumes, don't remove the volumes of containers we need to remove. This can lead to a chicken and the egg problem where the container removes the volume before we can. When we re-add volume locks this could lead to deadlocks. I don't really want to deal with this, and this doesn't seem a particularly harmful quirk, so we'll let this slide until we get a bug report. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Usability cleanup for 'inspect'Ed Santiago2019-03-13
| | | | | | | | | | | | | | | | | Make the usage messages (and options) different between podman inspect, podman image inspect, and podman container inspect. Disable inapplicable options (-l, -s) for podman image inspect Disable -t (type) when the type is implicit through the subcommand. Update man page to reflect differences in usage. Fix broken test. Uglier than desirable due to Go and Cobra limitations Signed-off-by: Ed Santiago <santiago@redhat.com>
* ginkgo status improvementsbaude2019-03-08
| | | | | | | a series of improvements to our ginkgo test framework so we can get better ideas of whats going on when run in CI Signed-off-by: baude <bbaude@redhat.com>
* Add tests to make sure podman container and podman image commands workDaniel J Walsh2019-03-02
| | | | | | | | | We have little to no testing to make sure we don't break podman image and podman container commands that wrap traditional commands. This PR adds tests for each of the commands. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Switch all referencs to image.ContainerConfig to image.ConfigDaniel J Walsh2018-12-21
| | | | | | This will more closely match what Docker is doing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* Integration Test Improvements #3baude2018-08-01
| | | | | | | | | Third round of speed improvements to the integration tests. Signed-off-by: baude <bbaude@redhat.com> Closes: #1193 Approved by: rhatdan
* Show duration for each ginkgo test and test speed improvementsbaude2018-07-28
| | | | | | | | | | | | | | Because our tests are getting so long, we want to be able to audit which tests are taking the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore should be auditable. Also, make speed improvements to tests by making sure we only unpack caches images that actually get used. Signed-off-by: baude <bbaude@redhat.com> Closes: #1178 Approved by: mheon
* do not commit default volumes from containerbaude2018-04-30
| | | | | | | | | | | when performing a container commit, we should not add the default list of volumes for a container to the resulting image. it will cause the resulting image to crash when run subsequently. Signed-off-by: baude <bbaude@redhat.com> Closes: #699 Approved by: mheon
* Use buildah commit and bud in podmanbaude2018-04-27
| | | | | | | | | | | Vendor in buildah and use as much of commit and bug as possible for podman build and commit. Resolves #586 Signed-off-by: baude <bbaude@redhat.com> Closes: #681 Approved by: mheon
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* More ginkgo migrationbaude2018-02-07
| | | | | | | | | | | * attach * run_exit * save * tag * version * run_privileged -> privileged Signed-off-by: baude <bbaude@redhat.com>
* Migrate Create|Commit to ginkgobaude2018-02-02
Migrate create and commit bats tests to the ginkgo test suite. In doing so, some structures had to be moved to pkg/podmanstructs/podmanstructs.go so we could do better verification of test results. Signed-off-by: baude <bbaude@redhat.com> Closes: #286 Approved by: rhatdan
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 15:43:41 +0000