summaryrefslogtreecommitdiff
path: root/test/e2e/create_test.go
Commit message (Collapse)AuthorAge
* Add support for the unless-stopped restart policyMatthew Heon2020-06-17
| | | | | | | | | | | | | | | | | | We initially believed that implementing this required support for restarting containers after reboot, but this is not the case. The unless-stopped restart policy acts identically to the always restart policy except in cases related to reboot (which we do not support yet), but it does not require that support for us to implement it. Changes themselves are quite simple, we need a new restart policy constant, we need to remove existing checks that block creation of containers when unless-stopped was used, and we need to update the manpages. Fixes #6508 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* {create,run} --replaceValentin Rothberg2020-06-15
| | | | | | | | | | | | | Add a `--replace` flag to the `container {create,run}` commands. If another container with the same name already exists, it will be replaced and removed. Adding this flag is motivated by #5485 to make running Podman in systemd units (or any other scripts/automation) more robust. In case of a crash, a container may not be removed by a sytemd unit anymore. The `--replace` flag allows for supporting crashes. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* container-{create,run}: add `--pod-id-file`Valentin Rothberg2020-06-11
| | | | | | | | Allow containers to join an existing pod via the `--pod-id-file` which is already supported by a number of `podman-pod` subcommands. Also add tests to make sure it's working and to prevent future regressions. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add more Remote testsDaniel J Walsh2020-06-03
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #6280 from mheon/switch_off_noexecOpenShift Merge Robot2020-05-21
|\ | | | | Turn off 'noexec' option by default for named volumes
| * Turn off 'noexec' option by default for named volumesMatthew Heon2020-05-20
| | | | | | | | | | | | | | | | | | We previously enforced this for security reasons, but as Dan has explained on several occasions, it's not very valuable there (it's trivially easy to bypass) and it does seriously annoy folks trying to use named volumes. Flip the default from 'on' to 'off'. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Merge pull request #6284 from baude/v2remotetestfixesOpenShift Merge Robot2020-05-21
|\ \ | | | | | | Test fixes for remote integration
| * | Test fixes for remote integrationBrent Baude2020-05-20
| | | | | | | | | | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* | | Fix create_test for remote integrationBrent Baude2020-05-20
|/ / | | | | | | | | | | fixes tests to pass for remote integration. the two remaining tests that are skipped are due to lack of logs command. Signed-off-by: Brent Baude <bbaude@redhat.com>
* / v2 enable remote integration testsBrent Baude2020-05-19
|/ | | | | | enable remote integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add small fixes for 'podman run' from diffing inspectMatthew Heon2020-05-05
| | | | | | | | | | | | | | | | | | | | | | | | To try and identify differences between Podman v1.9 and master, I ran a series of `podman run` commands with various flags through each, then inspecting the resulting containers and diffed the inspect JSON between each. This identified a number of issues which are fixed in this PR. In order of discovery: - Podman v2 gave short names for images, where Podman v1 gave the fully-qualified name. Simple enough fix (get image tags and use the first one if they're available) - The --restart flag was not being parsed correctly when a number of retries was specified. Parsing has been corrected. - The -m flag was not setting the swap limit (simple fix to set swap in that case if it's not explicitly set by the user) - The --cpus flag was completely nonfunctional (wired in its logic) Tests have been added for all of these to catch future regressions. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* test: enable create testsGiuseppe Scrivano2020-04-30
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Rework label parsingMatthew Heon2020-02-14
| | | | | | | | | | | | | | | We attempted to share all logic for parsing labels and environment variables, which on the surface makes lots of sense (both are formatted key=value so parsing logic should be identical) but has begun to fall apart now that we have added additional logic to environment variable handling. Environment variables that are unset, for example, are looked up against environment variables set for the process. We don't want this for labels, so we have to split parsing logic. Fixes #3854 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* build(deps): bump github.com/containers/image/v5 from 5.0.0 to 5.1.0Daniel J Walsh2019-12-20
| | | | | | | | | Bumps [github.com/containers/image/v5](https://github.com/containers/image) from 5.0.0 to 5.1.0. - [Release notes](https://github.com/containers/image/releases) - [Commits](https://github.com/containers/image/compare/v5.0.0...v5.1.0) Signed-off-by: dependabot-preview[bot] <support@dependabot.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* fix bug check nonexist authfileQi Wang2019-11-05
| | | | | | | | | Use GetDefaultAuthFile() from buildah. For podman command(except login), if authfile does not exist returns error. close #4328 Signed-off-by: Qi Wang <qiwan@redhat.com>
* Merge pull request #4369 from baude/golandautocodecorrectionsOpenShift Merge Robot2019-10-30
|\ | | | | goland autocorrections
| * goland autocorrectionsbaude2019-10-29
| | | | | | | | | | | | | | just ran the autocorrect code corrections from goland and it found a few nits. Signed-off-by: baude <bbaude@redhat.com>
* | Add e2e tests for manifest list supportNalin Dahyabhai2019-10-29
|/ | | | | | | | | | Test that when we pull using tag or digest references from locations that are manifest lists, that we can inspect using the references that we used for pulling, that the tags show up in the RepoTag list when we inspect an image that was pulled using a tag, and that the list and instance digests always both show up in the RepoDigest list. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* Refactor tests when checking for error exit codesJhon Honce2019-10-16
| | | | | | | Rather than checking for non-zero, we need to check for >0 to distinguish between timeouts and error exit codes. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* add --pull flag for podman create&runQi Wang2019-08-09
| | | | | | | | | | | Requirement from https://github.com/containers/libpod/issues/3575#issuecomment-512238393 Added --pull for podman create and pull to match the newly added flag in docker CLI. `missing`: default value, podman will pull the image if it does not exist in the local. `always`: podman will always pull the image. `never`: podman will never pull the image. Signed-off-by: Qi Wang <qiwan@redhat.com>
* Add a test for verifying ENTRYPOINT and CMDMatthew Heon2019-08-07
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* use imagecaches for local testsbaude2019-05-29
| | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* enable integration tests for remote-clientbaude2019-05-07
| | | | | | | first pass at enabling a swath of integration tests for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* create: fix segfault if container name already existsGiuseppe Scrivano2019-04-12
| | | | | | | | | do not try to use ctr if there was an error. It fixes a segfault when there is already a container with the same name. regression introduced by: ba65301c955454e47c3893ca548f18a845a4c4a9 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* ginkgo status improvementsbaude2019-03-08
| | | | | | | a series of improvements to our ginkgo test framework so we can get better ideas of whats going on when run in CI Signed-off-by: baude <bbaude@redhat.com>
* Add tests to make sure podman container and podman image commands workDaniel J Walsh2019-03-02
| | | | | | | | | We have little to no testing to make sure we don't break podman image and podman container commands that wrap traditional commands. This PR adds tests for each of the commands. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove a lot of '--rm' options from unit testsMatthew Heon2019-02-12
| | | | | | | | | | | | Previously, 'podman create --rm' did not work - it wouldn't error but it did nothing. It is now fixed, but unfortunately the unit tests used it a lot, in ways that just do not work when it actually functions. Begin the process of fixing now-failing tests. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* create pod on the flybaude2018-12-03
| | | | | | | | | | when a user specifies --pod to podman create|run, we should create that pod automatically. the port bindings from the container are then inherited by the infra container. this signicantly improves the workflow of running containers inside pods with podman. the user is still encouraged to use podman pod create to have more granular control of the pod create options. Signed-off-by: baude <bbaude@redhat.com>
* Add create test with --mount flagYiqiao Pu2018-11-29
| | | | Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* allow specification of entrypoint in the form of a sliceDaniel J Walsh2018-08-28
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1352 Approved by: mheon
* Show duration for each ginkgo test and test speed improvementsbaude2018-07-28
| | | | | | | | | | | | | | Because our tests are getting so long, we want to be able to audit which tests are taking the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore should be auditable. Also, make speed improvements to tests by making sure we only unpack caches images that actually get used. Signed-off-by: baude <bbaude@redhat.com> Closes: #1178 Approved by: mheon
* Add flag to add annotations to a containerMatthew Heon2018-06-04
| | | | | | | | | | Also add annotations from the image the container was created from. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #886 Approved by: rhatdan
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Match podman inspect output to docker inspectumohnani82018-02-06
| | | | | | | | | | | | Made a change to make sure that the output paths of podman inspect matches that of docker inspect. For example to get the stop signal you should be able to do podman inspect ctr --format {{.Config.StopSignal}} and the same thing in docker will give the same results. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #292 Approved by: rhatdan
* Migrate Create|Commit to ginkgobaude2018-02-02
Migrate create and commit bats tests to the ginkgo test suite. In doing so, some structures had to be moved to pkg/podmanstructs/podmanstructs.go so we could do better verification of test results. Signed-off-by: baude <bbaude@redhat.com> Closes: #286 Approved by: rhatdan