summaryrefslogtreecommitdiff
path: root/test/e2e/libpod_suite_test.go
Commit message (Collapse)AuthorAge
* use lookaside storage for remote testsbaude2020-11-16
| | | | | | | | | | in an effort to speed up the remote testing, we should be using lookaside storage to avoid pull images as well as importing multiple images into the RW store. one test was removed and added into system test by Ed in #8325 Signed-off-by: baude <bbaude@redhat.com>
* Make all Skips specify a reasonDaniel J Walsh2020-09-29
| | | | | | Always use CGROUPV2 rather then reading from system all the time. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove some SkipIfRootess flags from testsDaniel J Walsh2020-09-25
| | | | | | | We need to get more tests running in rootless mode. Since cgroupsV2 allows management of cgroups in rootless environments a lot of more tests can be run. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* e2e tests: SkipIfRemote(): add a reasonEd Santiago2020-09-23
| | | | | | | | | | | | | | | | | Now that Dan has added helpful comments to each SkipIfRemote, let's take the next step and include those messages in the Skip() output so someone viewing test results can easily see if a remote test is skipped for a real reason or for a FIXME. This commit is the result of a simple: perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go in the test/e2e directory, with a few minor (manual) changes in wording. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Fix up attach tests for podman remoteDaniel J Walsh2020-09-22
| | | | | | | | | | | When we execute podman-remote attach, we were not checking if the container was in the correct state, this is leading to timeouts and we had turned off remote testing. Also added an IfRemote() function so we can turn on more tests when using the "-l" flag for local, but use container name for remote. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Turn on a bunch more remote testsDaniel J Walsh2020-07-22
| | | | | | We need to be more specific about the remote tests we turn off. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable a bunch of remote testsDaniel J Walsh2020-07-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Error on rootless mac and ip addressesBrent Baude2020-07-15
| | | | | | | | When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125. Fixes: #6972 Signed-off-by: Brent Baude <bbaude@redhat.com>
* Vendor in new version of BuildahDaniel J Walsh2020-07-09
| | | | | | This also pulls in latest runc and containers/common Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* v2 enable remote integration testsBrent Baude2020-05-19
| | | | | | enable remote integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* enable rootless integration testingBrent Baude2020-05-10
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* test: fix exec preserve-fds testGiuseppe Scrivano2020-04-09
| | | | | | | | | | it specifies a fd is passed down but we are not really doing it, and it triggers the wrong fd to be closed by Podman after the OCI runtime invocation. Closes: https://github.com/containers/libpod/issues/5769 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* CI: format cirrus logsEd Santiago2020-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a new cirrus helper script, logformatter. Usage is: [commands...] | logformatter TEST-NAME It reformats its input into a readable, highlighed, linkable form. Some features: - boring stuff (timestamps, standard podman options) is deemphasized - important stuff (warnings, errors) is emphasized - in-page links to the actual failures - active links to source files - jumps to bottom of page on load, because that's where the errors are. (All errors are linked) Add it to select test commands (integration, system) and add a new artifacts_html, run in the 'always' block, which uploads generated *.log.html into Cirrus; from there we generate a live URL that can be viewed in browser. Unfortunately, due to security concerns in Cirrus, it is not currently possible to make the link a live one. Kludge: add a line of dashes after Restoring images; without this, the first test ("systemd PID 1") has no dashes before it, so logformatter doesn't see it. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add podman system reset commandDaniel J Walsh2019-11-29
| | | | | | | This command will destroy all data created via podman. It will remove containers, images, volumes, pods. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Move noCache logic lower in stackChris Evich2019-09-26
| | | | | | | | | | | | | | | | | | | One or more tests are not taking advantage of the local image cache. This has been observed to cause a testing flake in at least one `--sigproxy` test which uses `PodmanTestIntegration.PodmanPID()`. It has a rather short timeout of 15-seconds, which isn't always enough time to pull down a remote image. Fix this by reloacing the `noCache` logic from `PodmanTest.PodmanAsUserBase()` down the stack into `PodmanTestIntegration.makeOptions()`. This also eliminates the need to also check if a remote-client is being used - since it uses a different function. Also reverse the parameter order in `PodmanTest.PodmanBase` so that everywhere is consistently `noEvents` then `noCache`. Signed-off-by: Chris Evich <cevich@redhat.com>
* test: enable all tests for crunGiuseppe Scrivano2019-08-19
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* tests: disable some tests currently failing when not using runcGiuseppe Scrivano2019-08-12
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Use "none" instead of "null" for the null eventerMatthew Heon2019-08-01
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Do not use an events backend when restoring imagesMatthew Heon2019-07-31
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Force tests to use file backend for eventsMatthew Heon2019-07-31
| | | | | | | Podman-in-podman (and possibly ubuntu) have "issues" with journald. Let's just use file instead to be safe. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* use imagecaches for local testsbaude2019-05-29
| | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* enable integration tests for remote-clientbaude2019-05-07
| | | | | | | first pass at enabling a swath of integration tests for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote prune containersbaude2019-04-26
| | | | | | | enable the ability to prune containers from the remote-command. this also includes the system prune command. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote pause|unpausebaude2019-04-18
| | | | | | | | Add the ability to pause and unpause containers with the remote client. Also turned on the pause tests! Signed-off-by: baude <bbaude@redhat.com>
* Implement podman-remote rmJhon Honce2019-04-09
| | | | | | | | | * refactor command output to use one function * Add new worker pool parallel operations * Implement podman-remote umount * Refactored podman wait to use printCmdOutput() Signed-off-by: Jhon Honce <jhonce@redhat.com>
* test: fix SkipIfRootless() helperGiuseppe Scrivano2019-03-19
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Enable rootless integration testsbaude2019-03-19
| | | | Signed-off-by: baude <bbaude@redhat.com>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* tests, rootless: use relative path for export testGiuseppe Scrivano2019-02-22
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* tests: allow to override the OCI runtimeGiuseppe Scrivano2019-02-05
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #2184 from baude/remotemaskcommandsOpenShift Merge Robot2019-01-20
|\ | | | | Mask unimplemeted commands for remote client
| * Mask unimplemeted commands for remote clientbaude2019-01-19
| | | | | | | | | | | | | | | | | | | | | | Masking main level, image, and container commands that are not yet implemented for the remote client. As each command is completed, be sure to unmask it. Also, masking podman command line switches that are not applicable to the remote client. Signed-off-by: baude <bbaude@redhat.com>
* | podman-remote inspectbaude2019-01-18
|/ | | | | | base enablement of the inspect command. Signed-off-by: baude <bbaude@redhat.com>
* podman remote integrations testsbaude2019-01-15
| | | | | | add exists and rmi tests back in ... Signed-off-by: baude <bbaude@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Cirrus: Migrate PAPR testing of F28 to CirrusChris Evich2018-12-14
| | | | | | | | | | | Since the most recent TWO versions of Fedora are officially supported upstream, both need to be tested. Implement the concept of a 'prior' Fedora release in both base-image and cache-image production. Utilize the produced cache-image to test libpod. Remove F28 testing from PAPR. Much thanks to @baude @giuseppe for help with this. Signed-off-by: Chris Evich <cevich@redhat.com>
* Tests for podman volume commandsUrvashi Mohnani2018-12-06
| | | | Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* tests: change return type for PodmanAsUser to PodmanTestIntegrationGiuseppe Scrivano2018-11-27
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* allow ppc64le to pass libpod integration testsbaude2018-10-31
| | | | | | | | | | | | | | this pr allows the libpod integration suite to pass on the ppc64le architecture. in some cases, I had to skip tests. eventually, these tests need to be fixed so that they properly pass. of note for this PR is: * changed the ppc64le default container os to be overlay (over vfs) as vfs seems non-performant on ppc64le * still run vfs for rootless operations * some images names for ppc64le had to change because they don't exist. * this should help getting our CI to run on the platform Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #1638 from baude/fastpsOpenShift Merge Robot2018-10-23
|\ | | | | Make podman ps fast
| * Make podman ps fastbaude2018-10-23
| | | | | | | | | | | | Like Ricky Bobby, we want to go fast. Signed-off-by: baude <bbaude@redhat.com>
* | tests: use existing CRIU version checkAdrian Reber2018-10-23
|/ | | | | | | Do not re-implement the CRIU version check in the test suite, use it from libpod/pkg/criu. Signed-off-by: Adrian Reber <areber@redhat.com>
* tests: add checkpoint/restore testAdrian Reber2018-10-03
| | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* Add ability for ubuntu to be testedbaude2018-10-03
| | | | | | | | unfortunately the papr CI system cannot test ubuntu as a VM; therefore, this PR still keeps travis. but it does include fixes that will be required for running on modern versions of ubuntu. Signed-off-by: baude <bbaude@redhat.com>
* Add container runlabel commandbaude2018-09-28
| | | | | | | | | | | | | Execute the command as described by a container image. The value of the label is processed into a command by: 1. Ensuring the first argument of the command is podman. 2. Substituting any variables with those defined by the environment or otherwise. If no label exists in the container image, nothing is done. podman container runlabel LABEL IMAGE extra_args Signed-off-by: baude <bbaude@redhat.com>
* rework CI tests to test on VMsbaude2018-09-26
| | | | | | | | | | | | | | | | | | | | | This PR makes several key changes to our CI testing. Firstly, we now test podman on fedora 28, fedora 29, and centos VMS (rather than containers). Any of these that having failing tests are not marked as required yet. We still preserve the podman in podman and podman in docker tests as well and they are marked as required. The lint and validate work is now done on a openshift container. We also removed the rpm verification on papr and perform this test under the "images" test on the openshift ci. This PR exposes integration test fails on some of our OSs. My expectation is we will fix those in additional PRs and as they are fixed, we should be flipping the boolean bit to required. Signed-off-by: baude <bbaude@redhat.com> Closes: #1492 Approved by: mheon
* run different cgroup tests depending on conditionsbaude2018-09-12
| | | | | | | | | | | | | | when running podman's integration tests, we need to be able to understand our environment because the podman command will differ as will the results. there is no 100% way to know if we are in a container, but using a combination of container= and checking /proc seemed reasonable for our test suite. non of this code is run in podman proper. Signed-off-by: baude <bbaude@redhat.com> Closes: #1441 Approved by: mheon
* Update WaitForTimeOut to output OutputString to help with debugging.Daniel J Walsh2018-09-06
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1416 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-26 21:10:14 +0000