aboutsummaryrefslogtreecommitdiff
path: root/test/e2e/libpod_suite_test.go
Commit message (Collapse)AuthorAge
...
* Change pause container to infra containerhaircommander2018-08-23
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Added option to share kernel namespaces in libpod and podmanhaircommander2018-08-23
| | | | | | | | | A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* Further fix testsMatthew Heon2018-08-11
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Fix typo breaking testsMatthew Heon2018-08-10
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Only use cgroupfs for containerized testsMatthew Heon2018-08-10
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Temporarily force all tests to use cgroupfs driverMatthew Heon2018-08-10
| | | | | | | TODO: Change this to only force cgroupfs if if we are in a container. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* add podman pod inspectbaude2018-08-09
| | | | | | | | | first pass of podman pod inspect Signed-off-by: baude <bbaude@redhat.com> Closes: #1236 Approved by: rhatdan
* Use REGISTRIES_CONFIG_PATH for all testsbaude2018-08-02
| | | | | | | | | | | | | | | We should not be using the test systems registries.conf file for integration tests. We should always use a constructed file created specifically for the integration tests or we stand to have unpredictable results. The beforeTest function now sets an environment variable pointing to a registries.conf file in the test's tempdir. That file will container docker.io as a default. The afterTest function then clears the environment variable. Signed-off-by: baude <bbaude@redhat.com> Closes: #1197 Approved by: rhatdan
* Integration Test Improvements #3baude2018-08-01
| | | | | | | | | Third round of speed improvements to the integration tests. Signed-off-by: baude <bbaude@redhat.com> Closes: #1193 Approved by: rhatdan
* Integration Test Improvements #2baude2018-07-30
| | | | | | | | | | This is the second round of performance improvements for out integration tests. Signed-off-by: baude <bbaude@redhat.com> Closes: #1190 Approved by: rhatdan
* avoid spewing fds do to restore of cached imagesbaude2018-07-30
| | | | | | | | | | | due to how cstorage is designed, we were spewing thousands of fds when we restored cached images causing unwieldy rlimits. we now use podman load to restore the images thereby not tripping the issue. Signed-off-by: baude <bbaude@redhat.com> Closes: #1188 Approved by: baude
* Speed up test resultsbaude2018-07-30
| | | | | | | | | | | | Stop all containers with a zero timeout prior to trying to rm -fa. This results in quicker teardown times by not waiting for timeouts. Also, with wait tests, no need to wait the full 10 second sleep. 1 will do. Signed-off-by: baude <bbaude@redhat.com> Closes: #1181 Approved by: rhatdan
* Podman pod create/rm commands with man page and tests.haircommander2018-07-13
| | | | | | Includes a very stripped down version of podman pod ps, just for testing Signed-off-by: haircommander <pehunt@redhat.com>
* test: add env variables to the debug outputGiuseppe Scrivano2018-06-27
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #936 Approved by: rhatdan
* Update the version of conmon used in testDaniel J Walsh2018-06-22
| | | | | | | | | Also start using podmin in /usr/libexec/podman rather then crio. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #979 Approved by: baude
* Add --all,-a flag to podman imagesumohnani82018-06-18
| | | | | | | | | | | podman images will not show intermediate images by default. To view all images, including intermediate images created during a build, use the --all flag. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #947 Approved by: rhatdan
* Added --tls-verify functionality to podman search, with testshaircommander2018-06-15
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #932 Approved by: baude
* test: add test for running a rootless containerGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* Add a function for e2e test to write json fileYiqiao Pu2018-06-04
| | | | | | | | | This function is used to write json format configure files. Signed-off-by: Yiqiao Pu <ypu@redhat.com> Closes: #837 Approved by: rhatdan
* save and load should support multi-tag for docker-archiveumohnani82018-05-25
| | | | | | | | | | | | The docker-archive tar files can have multiple tags for the same image stored in it. Load pulls all the tags found in the archive when loading a tar file. Save can oush multiple tags of the same image to a tar archive. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #819 Approved by: rhatdan
* Spell check strings and commentsJhon Honce2018-05-25
| | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com> Closes: #831 Approved by: rhatdan
* enable no test cachebaude2018-04-21
| | | | | | | | | | | | | been meaning to do this for a while. add an environment variable that disables the caching and restoring of images before integration tests are run. this is useful for developers only ... when testing specific integration tests where caching and restoring the images is not worth the benefit. Signed-off-by: baude <bbaude@redhat.com> Closes: #650 Approved by: rhatdan
* Vendor in latest containers/image and contaners/storageumohnani82018-04-19
| | | | | | | | | Made necessary changes to functions to include contex.Context wherever needed Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #640 Approved by: baude
* Fix a typoYiqiao Pu2018-04-19
| | | | | | | | | Update LineInOuputContains to LineInOutputContains. Signed-off-by: Yiqiao Pu <ypu@redhat.com> Closes: #642 Approved by: rhatdan
* Add a function for check if command existYiqiao Pu2018-04-16
| | | | | | | Use this function to check if command exist before execute it in our test. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* Add WaitContainerReady for wait for docker registry readyYiqiao Pu2018-04-16
| | | | | | | | | | Sometime podman push local registry still failed caused by the docker registry is not start yet after sleep 5s in the test. So add this function to check the container status by its output and skip the test when the docker registry can not start normally instead of failed the case. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* HACK temporary fix for test suiteMatthew Heon2018-04-13
| | | | | | | | | | | | | We leak open files when creating new c/storage stores (locks do not close themselves, so the open FDs in the test suite increase every time we use c/storage to load cached images for the tests). Fix this temporarily by increasing rlimits on open files until we can create a permanent fix next release. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #615 Approved by: baude
* Fix leaking files in GinkgoMatthew Heon2018-04-13
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #612 Approved by: rhatdan
* Add hooks support to podmanDaniel J Walsh2018-04-05
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #155 Approved by: mheon
* Fix Travis tests for sig-proxyMatthew Heon2018-03-16
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #511 Approved by: rhatdan
* Add signal proxying to podman run, start, and attachMatthew Heon2018-03-15
| | | | | | | Also removes sig-proxy from 'podman create', where is does not make sense. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Fix test buildMatthew Heon2018-03-15
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #482 Approved by: baude
* Fix gofmtMatthew Heon2018-03-15
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #482 Approved by: baude
* Add extra E2E test for restarting containersMatthew Heon2018-03-15
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #482 Approved by: baude
* sleep does not catch SIGTERMbaude2018-03-14
| | | | | | | | | | | | As Matt pointed out, when running sleep in a container, the clean up was taking a full ten seconds to stop container because sleep does not catch SIGTERM which is the default podman stop signal and it had to wait for SIGKILL. Changing sleep to top should result in better test times. Signed-off-by: baude <bbaude@redhat.com> Closes: #492 Approved by: rhatdan
* Modify E2E tests to use alternate Conmon path if presentMatthew Heon2018-03-14
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #474 Approved by: rhatdan
* test/e2e/images_test.go: test with multiple tagsValentin Rothberg2018-03-14
| | | | | | | | | | | As podman-images(1) had some issues correctly reporting all RepoTags of an image (in the default format), extend the e2e tests to avoid running into similar in the future. Signed-off-by: Valentin Rothberg <vrothberg@suse.com> Closes: #477 Approved by: rhatdan
* Address review commentsbaude2018-02-24
| | | | | | | | | Review comments to delete WithNoNew function and its append. Signed-off-by: baude <bbaude@redhat.com> Closes: #369 Approved by: rhatdan
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Run podman inside a podman containerbaude2018-02-16
| | | | | | | | | | | | | | | | | We should be able to run nested podman containers in particular for our testing environment. i.e. eat our own dog food. Some privileges had to be corrected in order for this to work correctly. Added a third papr target that runs podman tests inside podman. I marked the test as not required right now as we get more confident in the results Signed-off-by: baude <bbaude@redhat.com> Closes: #340 Approved by: rhatdan
* Honor ENTRYPOINT in imagebaude2018-02-11
| | | | | | | | | | | | | When an image has an ENTRYPOINT defined, we should be honoring it. The problem is described in issue #321. Also, added buildah binary to test runtimes for testing entrypoint and will also allow us to test podman build as well. Signed-off-by: baude <bbaude@redhat.com> Closes: #322 Approved by: rhatdan
* Update pause tests per QE suggestions and move to gingkoTomSweeneyRedHat2018-02-08
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #285 Approved by: mheon
* Final ginkgo migrationbaude2018-02-08
| | | | | | | | | | | | | | | Completion of the migration from bats to ginkgo. This includes: * load * mount * pause * port * run_networking * search Note: build will be done within a different PR Signed-off-by: baude <bbaude@redhat.com>
* More ginkgo migrationbaude2018-02-07
| | | | | | | | | | | * attach * run_exit * save * tag * version * run_privileged -> privileged Signed-off-by: baude <bbaude@redhat.com>
* Migrate more tests to ginkgobaude2018-02-06
| | | | | | | | | | | | | | | Migrate the following to the ginkgo integration tests: * images * import * inspect * logs * run_dns Signed-off-by: baude <bbaude@redhat.com> Closes: #295 Approved by: mheon
* Migrate Create|Commit to ginkgobaude2018-02-02
| | | | | | | | | | | | Migrate create and commit bats tests to the ginkgo test suite. In doing so, some structures had to be moved to pkg/podmanstructs/podmanstructs.go so we could do better verification of test results. Signed-off-by: baude <bbaude@redhat.com> Closes: #286 Approved by: rhatdan
* Migrate kill tests to ginkgobaude2018-02-01
| | | | | | | | | | Migrate kill tests to the ginkgo suite and remove the podman_kill bats. Signed-off-by: baude <bbaude@redhat.com> Closes: #281 Approved by: baude
* Implment network == nonebaude2018-01-31
| | | | | | | | | | When network == none, the container should only have a loopback interface and that's it. Signed-off-by: baude <bbaude@redhat.com> Closes: #176 Approved by: baude
* Ginkgo Tests: ps, pull, push and rmbaude2018-01-31
| | | | | | | | | | | | | Migrate ps, pull, push, and rm from bats to ginkgo. Also, fixed a conditional issue with adding ports when an image defines the port and the user wants to override it. Signed-off-by: baude <bbaude@redhat.com> Closes: #277 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-20 08:28:42 +0000