aboutsummaryrefslogtreecommitdiff
path: root/test/e2e/pod_create_test.go
Commit message (Collapse)AuthorAge
* Fix podman pod create --infra-command and --infra-imageDaniel J Walsh2020-09-16
| | | | | | | | Currently infr-command and --infra-image commands are ignored from the user. This PR instruments them and adds tests for each combination. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* e2e tests: use actual temp dirs, not "/tmp/dir"Ed Santiago2020-08-18
| | | | | | | | | | | | | | | | One of the --iidfile tests was flaking: Error: failed to write image ID to file "/tmp/dir/idFile": open /tmp/dir/idFile: no such file or directory Root cause: test was actually not mkdir'ing /tmp/dir. Test was mostly passing because _other_ tests in the suite were mkdir'ing it, but once in a while this test ran before the others. Solution: fixed this test to use CreateTempDirInTempDir(). And, since hardcoded tempdirs are bad practice, grepped for '"dir"' and fixed all other instances too. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Error on rootless mac and ip addressesBrent Baude2020-07-15
| | | | | | | | When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125. Fixes: #6972 Signed-off-by: Brent Baude <bbaude@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* pod create --replaceValentin Rothberg2020-06-15
| | | | | | | | | | | | | | | Add a `--replace` flag to the `pod create` command. If another pod with the same name already exists, it will be replaced and removed. Adding this flag is motivated by #5485 to make running Podman in systemd units (or any other scripts/automation) more robust. In case of a crash, a pod may not be removed by a sytemd unit anymore. The `--replace` flag allows for supporting crashes. Note that the `--replace` flag does not require the `--name` flag to be set, so it can be set unconditionally in `podman generate systemd`. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add more Remote testsDaniel J Walsh2020-06-03
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #6313 from sujil02/pod-create-idOpenShift Merge Robot2020-05-21
|\ | | | | Fixes podman pod create --pod-id-file #6292
| * Fixes podman pod create --pod-id-file #6292Sujil022020-05-21
| | | | | | | | | | | | Prints pod id to file and adds relevant test case Signed-off-by: Sujil02 <sushah@redhat.com>
* | enable pod_create remote integration testsBrent Baude2020-05-20
|/ | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* v2 enable remote integration testsBrent Baude2020-05-19
| | | | | | enable remote integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* test: enable pod create testsGiuseppe Scrivano2020-04-27
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add network options to podman pod createMatthew Heon2020-02-19
| | | | | | | | | | | | | | | | | Enables most of the network-related functionality from `podman run` in `podman pod create`. Custom CNI networks can be specified, host networking is supported, DNS options can be configured. Also enables host networking in `podman play kube`. Fixes #2808 Fixes #3837 Fixes #4432 Fixes #4718 Fixes #4770 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* use imagecaches for local testsbaude2019-05-29
| | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* enable integration tests for remote-clientbaude2019-05-07
| | | | | | | first pass at enabling a swath of integration tests for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* tests: re-enable some tests for rootless modeGiuseppe Scrivano2019-03-19
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Enable rootless integration testsbaude2019-03-19
| | | | Signed-off-by: baude <bbaude@redhat.com>
* ginkgo status improvementsbaude2019-03-08
| | | | | | | a series of improvements to our ginkgo test framework so we can get better ideas of whats going on when run in CI Signed-off-by: baude <bbaude@redhat.com>
* Fix SystemExec completion raceChris Evich2019-03-01
| | | | | | | | | | | | | Some callers assume when SystemExec returns, the command has completed. Other callers explicitly wait for completion (as required). However, forgetting to do that is an incredibly easy mistake to make. Fix this by adding an explicit parameter to the function. This requires every caller to deliberately state whether or not a completion-check is required. Also address **many** resource naming / cleanup completion-races. Signed-off-by: Chris Evich <cevich@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Allow users to expose ports from the pod to the hostbaude2018-11-20
| | | | | | | | | | we need to allow users to expose ports to the host for the purposes of networking, like a webserver. the port exposure must be done at the time the pod is created. strictly speaking, the port exposure occurs on the infra container. Signed-off-by: baude <bbaude@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* Make podman ps fastbaude2018-10-23
| | | | | | Like Ricky Bobby, we want to go fast. Signed-off-by: baude <bbaude@redhat.com>
* Added option to share kernel namespaces in libpod and podmanhaircommander2018-08-23
| | | | | | | | | A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Show duration for each ginkgo test and test speed improvementsbaude2018-07-28
| | | | | | | | | | | | | | Because our tests are getting so long, we want to be able to audit which tests are taking the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore should be auditable. Also, make speed improvements to tests by making sure we only unpack caches images that actually get used. Signed-off-by: baude <bbaude@redhat.com> Closes: #1178 Approved by: mheon
* Podman pod create/rm commands with man page and tests.haircommander2018-07-13
Includes a very stripped down version of podman pod ps, just for testing Signed-off-by: haircommander <pehunt@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-26 04:22:40 +0000