aboutsummaryrefslogtreecommitdiff
path: root/test/e2e/pod_infra_container_test.go
Commit message (Collapse)AuthorAge
* patch for pod host networking & other host namespace handlingcdoern2022-06-09
| | | | | | | | | this patch included additonal host namespace checks when creating a ctr as well as fixing of the tests to check /proc/self/ns/net see #14461 Signed-off-by: cdoern <cdoern@redhat.com>
* fix pod network handling with a host networkcdoern2022-06-02
| | | | | | | | | | | | | the function `GetDefaultNamespaceMode` for pods checks if we are sharing each namespace and if not, returns the default which in the case of a network is slirp. add a switch case for explicitly checking if the pod's network mode is host and if so, return specgen.Host for the container resolves #13763 Signed-off-by: cdoern <cbdoer23@g.holycross.edu> Signed-off-by: cdoern <cdoern@redhat.com>
* enable errcheck linterPaul Holzinger2022-04-29
| | | | | | | | The errcheck linter makes sure that errors are always check and not ignored by accident. It spotted a lot of unchecked errors, mostly in the tests but also some real problem in the code. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Robustify nginx testsEd Santiago2022-04-25
| | | | | | | | | | | | | | | | | | | | [skip ci] While chasing a flake, I discovered that our alpine_nginx image is broken: it returns 404 on all requests. We never caught this because--surprise!--curl exits 0 even when server returns 4xx/5xx status. Let's be strict: add -f (--fail) option to all invocations of curl. And, although I couldn't identify the root cause of the flake (in "run two containers with the same IP" test), I can at least fix the broken wait-for-nginx loop, bump up the number of retries, and improve diagnostics on failure. And add a strict error-message check. Signed-off-by: Ed Santiago <santiago@redhat.com>
* shared netns and --add-host should conflictPaul Holzinger2022-04-22
| | | | | | | | Because /etc/hosts is shared for all containers with a shared network namespace you should not be able to add hosts from a joined container. Only the primary netns container can set the hosts. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Standardize on capatalized CgroupsDaniel J Walsh2022-01-14
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Use HaveLen(x) instead of Expect(len(y)).To(Equal(x))Ed Santiago2021-12-02
| | | | | | sed -i -e 's/Expect(len(\(.*\)))\.To(Equal(\(.*\)))/Expect(\1).To(HaveLen(\2))/' test/e2e/*.go Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: clean up antihelpful BeTrue()sEd Santiago2021-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Many ginkgo tests have been written to use this evil form: GrepString("foo") Expect(that to BeTrue()) ...which yields horrible useless messages on failure: false is not true Identify those (automatically, via script) and convert to: Expect(output to ContainSubstring("foo")) ...which yields: "this output" does not contain substring "foo" There are still many BeTrue()s left. This is just a start. This is commit 1 of 2. It includes the script I used, and all changes to *.go are those computed by the script. Commit 2 will apply some manual fixes. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: use Should(Exit()) and ExitWithError()Ed Santiago2021-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e2e test failures are rife with messages like: Expected 1 to equal 0 These make me cry. They're anti-helpful, requiring the reader to dive into the source code to figure out what those numbers mean. Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I don't know if it spits out a better diagnostic (I have no way to run e2e tests on my laptop), but I have to fantasize that it will, and given the state of our flakes I assume that at least one test will fail and give me the opportunity to see what the error message looks like. THIS IS NOT REVIEWABLE CODE. There is no way for a human to review it. Don't bother. Maybe look at a few random ones for sanity. If you want to really review, here is a reproducer of what I did: cd test/e2e ! positive assertions. The second is the same as the first, ! with the addition of (unnecessary) parentheses because ! some invocations were written that way. The third is BeZero(). perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go ! Same as above, but handles three non-numeric exit codes ! in run_exit_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go ! negative assertions. Difference is the spelling of 'To(Not)', ! 'ToNot', and 'NotTo'. I assume those are all the same. perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go ! negative, old use of BeZero() perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go Run those on a clean copy of main branch (at the same branch point as my PR, of course), then diff against a checked-out copy of my PR. There should be no differences. Then all you have to review is that my replacements above are sane. UPDATE: nope, that's not enough, you also need to add gomega/gexec to the files that don't have it: perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}')) UPDATE 2: hand-edit run_volume_test.go UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places UPDATE 4: skip a test due to bug #10935 (race condition) Signed-off-by: Ed Santiago <santiago@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Disable incompatible rootless + CGroupsV1 testsChris Evich2020-12-15
| | | | | | | | | | These tests simply will not work under these conditions. Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04 (prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and Ubuntu 20.10 were updated to always use CGroupsV2 with crun. Signed-off-by: Chris Evich <cevich@redhat.com>
* Use ping from alpineChris Evich2020-11-04
| | | | | | | | | | | As of this commit, in Fedora 33, without without `CAP_NET_ADMIN` and `CAP_NET_RAW`, require setting `net.ipv3.ping_group_range` in order for the `ping` command to work inside a container. However, not all images `ping` are created equal. For whatever reason, the busybox version in the busybox container image, does not function. Switch to the Alpine image's busybox ping, which seems to work fine. Signed-off-by: Chris Evich <cevich@redhat.com>
* Attempt to turn on some more remote testsDaniel J Walsh2020-10-07
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix podman-remote ps --ns brokenzhangguanzhang2020-10-04
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* e2e tests: SkipIfRemote(): add a reasonEd Santiago2020-09-23
| | | | | | | | | | | | | | | | | Now that Dan has added helpful comments to each SkipIfRemote, let's take the next step and include those messages in the Skip() output so someone viewing test results can easily see if a remote test is skipped for a real reason or for a FIXME. This commit is the result of a simple: perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go in the test/e2e directory, with a few minor (manual) changes in wording. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Examine all SkipIfRemote functionsDaniel J Walsh2020-09-22
| | | | | | | | Remove ones that are not needed. Document those that should be there. Document those that should be fixed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Turn on a bunch more remote testsDaniel J Walsh2020-07-22
| | | | | | We need to be more specific about the remote tests we turn off. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* v2 enable remote integration testsBrent Baude2020-05-19
| | | | | | enable remote integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* test: enable all pod testsGiuseppe Scrivano2020-04-27
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Refactor tests when checking for error exit codesJhon Honce2019-10-16
| | | | | | | Rather than checking for non-zero, we need to check for >0 to distinguish between timeouts and error exit codes. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* add test to verify hostname is shared in a podPeter Hunt2019-08-07
| | | | Signed-off-by: Peter Hunt <pehunt@redhat.com>
* use imagecaches for local testsbaude2019-05-29
| | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2590 from haircommander/pause_entry_cmdOpenShift Merge Robot2019-03-08
|\ | | | | Default to image entrypoint for infra container
| * Default to image entrypoint for infra containerPeter Hunt2019-03-08
| | | | | | | | | | | | | | If the pod infra container is overriden, we want to run the entry point of the image, instead of the default infra command. This allows users to override the infra-image with greater ease. Also use process environment variables from image Signed-off-by: Peter Hunt <pehunt@redhat.com>
* | ginkgo status improvementsbaude2019-03-08
|/ | | | | | | a series of improvements to our ginkgo test framework so we can get better ideas of whats going on when run in CI Signed-off-by: baude <bbaude@redhat.com>
* Append hosts to dependency container's /etc/hosts filePeter Hunt2019-03-05
| | | | | | Before, any container with a netNS dependency simply used its dependency container's hosts file, and didn't abide its configuration (mainly --add-host). Fix this by always appending to the dependency container's hosts file, creating one if necessary. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* pod infra container is started before a container in a pod is run, started, ↵Peter Hunt2019-02-15
| | | | | | | | | | or attached. Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod. Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* Make podman ps fastbaude2018-10-23
| | | | | | Like Ricky Bobby, we want to go fast. Signed-off-by: baude <bbaude@redhat.com>
* Pass on securityOpts from podInfraContainer to container added to pod.Daniel J Walsh2018-09-11
| | | | | | | | | | This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way. Signed-off-by: haircommander <pehunt@redhat.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1347 Approved by: mheon
* Change pause container to infra containerhaircommander2018-08-23
Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 12:22:23 +0000