aboutsummaryrefslogtreecommitdiff
path: root/test/e2e/run_networking_test.go
Commit message (Collapse)AuthorAge
* Correct port range logic for port generationMatthew Heon2020-12-08
| | | | | | | | | | | | | The existing logic (Range > 0) always triggered, because range is guaranteed to be at least 1 (a single port has a range of 1, a two port range (e.g. 80-81) has a range of 2, and so on). As such this could cause ports that had a host port assigned to them by the user to randomly assign one instead. Fixes #8650 Fixes #8651 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Support --network=default as if it was privateDaniel J Walsh2020-12-02
| | | | | | | | | | | | Docker defines an option of "default" which means to use the default network. We should support this with the same code path as --network="". This is important for compatibility with the Docker API. Fixes: https://github.com/containers/podman/issues/8544 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Revert "Allow multiple --network flags for podman run/create"Luap992020-11-30
| | | | | | | | | As described in issue #8507 this commit contains a breaking change which is not wanted in v2.2. We can discuss later if we want this in 3.0 or not. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Allow multiple --network flags for podman run/createPaul Holzinger2020-11-20
| | | | | | | | | | | | | | We allow a container to be connected to several cni networks but only if they are listed comma sperated. This is not intuitive for users especially since the flag parsing allows multiple string flags but only would take the last value. see: spf13/pflag#72 Also get rid of the extra parsing logic for pods. The invalid options are already handled by `pkg/specgen`. A test is added to prevent a future regression. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Make sure /etc/hosts populated correctly with networksDaniel J Walsh2020-11-16
| | | | | | | | | | | The --hostname and containername should always be added to containers. Added some tests to make sure you can always ping the hostname and container name from within the container. Fixes: https://github.com/containers/podman/issues/8095 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* make network name uniq for dnsname testsbaude2020-11-09
| | | | | | | | ed identified that the dnsname integration test does not use a unique name and therefore cannot be cleaned up. this was made worse by a improper defer statement to remove the network should the test fail. Signed-off-by: baude <bbaude@redhat.com>
* Fix dnsname when joining a different network namespace in a podPaul Holzinger2020-10-30
| | | | | | | | | | When creating a container in a pod the podname was always set as the dns entry. This is incorrect when the container is not part of the pods network namespace. This happend both rootful and rootless. To fix this check if we are part of the pods network namespace and if not use the container name as dns entry. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #8053 from rhatdan/detachkeysOpenShift Merge Robot2020-10-22
|\ | | | | podman create doesn't support creating detached containers
| * podman create doesn't support creating detached containersDaniel J Walsh2020-10-21
| | | | | | | | | | | | | | | | | | | | | | | | Detached containers and detach keys are only created with the podman run, i exec, and start commands. We do not store the detach key sequence or the detach flags in the database, nor does Docker. The current code was ignoreing these fields but documenting that they can be used. Fix podman create man page and --help output to no longer indicate that --detach and --detach-keys works. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Add hostname to /etc/hosts for --net=noneMatthew Heon2020-10-21
|/ | | | | | | | | This does not match Docker, which does not add hostname in this case, but it seems harmless enough. Fixes #8095 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Ensure that hostname is added to hosts with net=hostMatthew Heon2020-10-20
| | | | | | | | | | | | | | | | | | When a container uses --net=host the default hostname is set to the host's hostname. However, we were not creating any entries in `/etc/hosts` despite having a hostname, which is incorrect. This hostname, for Docker compat, will always be the hostname of the host system, not the container, and will be assigned to IP 127.0.1.1 (not the standard localhost address). Also, when `--hostname` and `--net=host` are both passed, still use the hostname from `--hostname`, not the host's hostname (we still use the host's hostname by default in this case if the `--hostname` flag is not passed). Fixes #8054 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Ports given only by number should have random host portMatthew Heon2020-10-08
| | | | | | | | | | | | | | | In Podman 1.9.3, `podman run -p 80` would assign port 80 in the container to a random port on the host. In Podman 2.0 and up, it assigned Port 80 in the container to Port 80 on the host. This is an easy fix, fortunately - just need to remove the bit that assumed host port, if not given, should be set to container port. We also had a test for the bad behavior, so fix it to test for the correct way of doing things. Fixes #7947 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Populate /etc/hosts file when run in a user namespaceDaniel J Walsh2020-10-07
| | | | | | | | | We do not populate the hostname field with the IP Address when running within a user namespace. Fixes https://github.com/containers/podman/issues/7490 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make all Skips specify a reasonDaniel J Walsh2020-09-29
| | | | | | Always use CGROUPV2 rather then reading from system all the time. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove SkipIfRootless if possible, document other callsDaniel J Walsh2020-09-27
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Examine all SkipIfRemote functionsDaniel J Walsh2020-09-22
| | | | | | | | Remove ones that are not needed. Document those that should be there. Document those that should be fixed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* run_networking e2e test: add cleanup to some testsEd Santiago2020-09-10
| | | | | | | | | | | | | | | Problem: if either of the two "podman network create" tests fail, all subsequent retries will also fail because the created network has not been cleaned up (so "network create" will fail with EEXIST). Solution: run "podman network rm" as deferred cleanup instead of in each test. This is NOT a fix for #7583 - it is just a way to allow ginkgo to retry a failing test. Signed-off-by: Ed Santiago <santiago@redhat.com>
* fix pod creation with "new:" syntax followup + allow hostnamePaul Holzinger2020-08-20
| | | | | | | | | | | | | | | | | | | | | Fixes: 4c75fe3f70ed ("fix pod creation with "new:" syntax") Commit 4c75fe3f70ed passes all net options to the pod but forgot to unset the options for the container creation. This leads to erros when using flags like `--ip` since we tried setting the ip on the pod and container which obviously fails. I didn't notice the bug because we don't throw an error when specifing port bindings on a container which joins the pods network namespace. (#7373) Also allow the use of `--hostname` and pass that option to the pod and unset it for the container. The container has to use the pods hostname anyway. This would error otherwise. Added tests to prevent regression. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add support for setting the CIDR when using slirp4netnsAdis Hamzić2020-08-12
| | | | | | | | This adds support for the --cidr parameter that is supported by slirp4netns since v0.3.0. This allows the user to change the ip range that is used for the network inside the container. Signed-off-by: Adis Hamzić <adis@hamzadis.com>
* Merge pull request #7216 from 5eraph/masterOpenShift Merge Robot2020-08-09
|\ | | | | support outbound-addr
| * changes to support outbound-addr5eraph2020-08-07
| | | | | | | | | | | | Fixes #6064 Signed-off-by: Bohumil Cervenka <5eraph@protonmail.com>
* | Do not set host IP on ports when 0.0.0.0 requestedMatthew Heon2020-08-03
|/ | | | | | | | | | | | | | | | Docker and CNI have very different ideas of what 0.0.0.0 means. Docker takes it to be 0.0.0.0/0 - that is, bind to every IPv4 address on the host. CNI (and, thus, root Podman) take it to mean the literal IP 0.0.0.0. Instead, CNI interprets the empty string ("") as "bind to all IPs". We could ask CNI to change, but given this is established behavior, that's unlikely. Instead, let's just catch 0.0.0.0 and turn it into "" when we parse ports. Fixes #7014 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Binding the same container port to >1 host port is OKMatthew Heon2020-07-29
| | | | | | | | | | | The initial version of the new port code mistakenly restricted this, so un-restrict it. We still need to maintain the map of container ports, unfortunately (need to verify if the port in question is a duplicate, for example). Fixes #7062 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Turn on a bunch more remote testsDaniel J Walsh2020-07-22
| | | | | | We need to be more specific about the remote tests we turn off. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #6965 from giuseppe/followup-pr6324OpenShift Merge Robot2020-07-17
|\ | | | | allow switching of port-forward approaches in rootless/using slirp4netns
| * network, slirp4netns: add option to allow host loopbackGiuseppe Scrivano2020-07-16
| | | | | | | | | | | | Closes: https://github.com/containers/podman/issues/6912 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
| * libpod: pass down network optionsGiuseppe Scrivano2020-07-16
| | | | | | | | | | | | do not pass network specific options through the network namespace. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Fix "Error: unrecognized protocol \"TCP\" in port mapping"Akihiro Suda2020-07-15
|/ | | | | | | | "TCP" in upper characters was not recognized as a valid protocol name. Fix #6948 Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
* Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Allow empty host port in --publish flagMatthew Heon2020-06-29
| | | | | | | | | | | | | | | | | I didn't believe that this was actually legal, but it looks like it is. And, unlike our previous understanding (host port being empty means just use container port), empty host port actually carries the same meaning as `--expose` + `--publish-all` (that is, assign a random host port to the given container port). This requires a significant rework of our port handling code to handle this new case. I don't foresee this being commonly used, so I optimized having a fixed port number as fast path, which this random assignment code running after the main port handling code only if necessary. Fixes #6806 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Reformat inspect network settingsQi Wang2020-06-23
| | | | | | Reformat ports of inspect network settings to compatible with docker inspect. Close #5380 Signed-off-by: Qi Wang <qiwan@redhat.com>
* Enable IPv6 port bindingMatthew Heon2020-06-10
| | | | | | | | | | | | | | | | | | | | | | | | Two areas needed tweaking to accomplish this: port parsing and binding ports on the host. Parsing is an obvious problem - we have to accomodate an IPv6 address enclosed by [] as well as a normal IPv4 address. It was slightly complicated by the fact that we previously just counted the number of colons in the whole port definition (a thousand curses on whoever in the IPv6 standard body decided to reuse colons for address separators), but did not end up being that bad. Libpod also (optionally) binds ports on the host to prevent their reuse by host processes. This code was IPv4 only for TCP, and bound to both for UDP (which I'm fairly certain is not correct, and has been adjusted). This just needed protocols adjusted to read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to bind to. Fixes #5715 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* test: enable networking test for rootlessGiuseppe Scrivano2020-05-12
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* enable rootless integration testingBrent Baude2020-05-10
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* Rework port parsing to support --expose and -PMatthew Heon2020-05-04
| | | | | | | | | | | | | | | | | | | | | As part of this, make a major change to the type we use to represent port mappings in SpecGen (from using existing OCICNI structs to using our own custom one). This struct has the advantage of supporting ranges, massively reducing traffic over the wire for Podman commands using them (for example, the `podman run -p 5000-6000` command will now send only one struct instead of 1000). This struct also allows us to easily validate which ports are in use, and which are not, which is necessary for --expose. Once we have parsed the ports from the new struct, we can produce an accurate map including all currently requested ports, and use that to determine what ports need to be exposed (some requested exposed ports may already be included in a mapping from --publish and will be ignored) and what open ports on the host we can map them to. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* spec: allow container alias name in lookupGiuseppe Scrivano2020-02-26
| | | | | | | | Previously --uts=container: expected the full container ID. Closes: https://github.com/containers/libpod/issues/5289 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Allow --ip and --mac to be set when joining a CNI netMatthew Heon2019-11-26
| | | | | | | | | | These only conflict when joining more than one network. We can still set a single CNI network and set a static IP and/or static MAC. Fixes #4500 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Refactor tests when checking for error exit codesJhon Honce2019-10-16
| | | | | | | Rather than checking for non-zero, we need to check for >0 to distinguish between timeouts and error exit codes. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* rootless: add an entry to /etc/hosts when using slirp4netnsGiuseppe Scrivano2019-06-24
| | | | | | Closes: https://github.com/containers/libpod/issues/3405 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* use imagecaches for local testsbaude2019-05-29
| | | | | | | | | when doing localized tests (not varlink), we can use secondary image stores as read-only image caches. this cuts down on test time significantly because each test does not need to restore the images from a tarball anymore. Signed-off-by: baude <bbaude@redhat.com>
* Enable rootless integration testsbaude2019-03-19
| | | | Signed-off-by: baude <bbaude@redhat.com>
* ginkgo status improvementsbaude2019-03-08
| | | | | | | a series of improvements to our ginkgo test framework so we can get better ideas of whats going on when run in CI Signed-off-by: baude <bbaude@redhat.com>
* Fix SystemExec completion raceChris Evich2019-03-01
| | | | | | | | | | | | | Some callers assume when SystemExec returns, the command has completed. Other callers explicitly wait for completion (as required). However, forgetting to do that is an incredibly easy mistake to make. Fix this by adding an explicit parameter to the function. This requires every caller to deliberately state whether or not a completion-check is required. Also address **many** resource naming / cleanup completion-races. Signed-off-by: Chris Evich <cevich@redhat.com>
* Fix up handling of user defined network namespacesDaniel J Walsh2019-02-23
| | | | | | | | | If user specifies network namespace and the /etc/netns/XXX/resolv.conf exists, we should use this rather then /etc/resolv.conf Also fail cleaner if the user specifies an invalid Network Namespace. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Add test for sharing resolv and hosts with netnsMatthew Heon2018-12-12
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-01-19 06:25:15 +0000