summaryrefslogtreecommitdiff
path: root/test/e2e/run_test.go
Commit message (Collapse)AuthorAge
* Fix file descriptor leaks and add testJhon Honce2021-08-24
| | | | | | | | | | * Add response.Body.Close() where needed to release HTTP connections to API server. * Add tests to ensure no general leaks occur. 100% coverage would be required to ensure no leaks on any call. * Update code comments to be godoc correct Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #11205 from Shivkumar13/shivkumar-tls-fixOpenShift Merge Robot2021-08-23
|\ | | | | Support for --tls-verify flag in podman-run & podman-create
| * Support for --tls-verify flag in podman run & podman createShivkumar132021-08-21
| | | | | | | | Signed-off-by: Shivkumar13 <sople@redhat.com>
* | Fix AVC denials in tests of volume mountsChris Evich2021-08-18
|/ | | | | | | | | This becomes a problem on hosts with upgraded policies. Ref: https://github.com/containers/podman/issues/10522 Also, made a small change to compose-test setup to reduce runtime. Signed-off-by: Chris Evich <cevich@redhat.com>
* personality: Add support for setting execution domain.flouthoc2021-08-06
| | | | | | | | | | Execution domains tell Linux how to map signal numbers into signal actions. The execution domain system allows Linux to provide limited support for binaries compiled under other UNIX-like operating systems. Reference: https://man7.org/linux/man-pages/man2/personality.2.html Signed-off-by: flouthoc <flouthoc.git@gmail.com>
* Merge pull request #11048 from cdoern/heatlhCheckCompatOpenShift Merge Robot2021-07-29
|\ | | | | Fixed Healthcheck formatting, string to []string
| * Fixed Healthcheck formatting, string to []stringcdoern2021-07-28
| | | | | | | | | | | | | | | | | | | | Compat healthcheck tests are of the format []string but podman's were of the format string. Converted podman's to []string at the specgen level since it has the same effect and removed the incorrect parsing of compat healthchecks. fixes #10617 Signed-off-by: cdoern <cdoern@redhat.com>
| * Fixed Healthcheck formatting, string to []stringcdoern2021-07-26
| | | | | | | | | | | | | | | | | | | | Compat healthcheck tests are of the format []string but podman's were of the format string. Converted podman's to []string at the specgen level since it has the same effect and removed the incorrect parsing of compat healthchecks. fixes #10617 Signed-off-by: cdoern <cdoern@redhat.com>
* | e2e tests: use Should(Exit()) and ExitWithError()Ed Santiago2021-07-15
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e2e test failures are rife with messages like: Expected 1 to equal 0 These make me cry. They're anti-helpful, requiring the reader to dive into the source code to figure out what those numbers mean. Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I don't know if it spits out a better diagnostic (I have no way to run e2e tests on my laptop), but I have to fantasize that it will, and given the state of our flakes I assume that at least one test will fail and give me the opportunity to see what the error message looks like. THIS IS NOT REVIEWABLE CODE. There is no way for a human to review it. Don't bother. Maybe look at a few random ones for sanity. If you want to really review, here is a reproducer of what I did: cd test/e2e ! positive assertions. The second is the same as the first, ! with the addition of (unnecessary) parentheses because ! some invocations were written that way. The third is BeZero(). perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go ! Same as above, but handles three non-numeric exit codes ! in run_exit_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go ! negative assertions. Difference is the spelling of 'To(Not)', ! 'ToNot', and 'NotTo'. I assume those are all the same. perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go ! negative, old use of BeZero() perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go Run those on a clean copy of main branch (at the same branch point as my PR, of course), then diff against a checked-out copy of my PR. There should be no differences. Then all you have to review is that my replacements above are sane. UPDATE: nope, that's not enough, you also need to add gomega/gexec to the files that don't have it: perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}')) UPDATE 2: hand-edit run_volume_test.go UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places UPDATE 4: skip a test due to bug #10935 (race condition) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #10451 from giuseppe/test-ENOSYSOpenShift Merge Robot2021-06-16
|\ | | | | tests: update CI images
| * test: drop invalid testGiuseppe Scrivano2021-06-16
| | | | | | | | | | | | | | | | | | runc-1.0-rc95 refuses destination paths that are not absolute. The test was causing a mount with a destination "[/etc/foo]" causing the OCI runtime to fail. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Fix permissions on initially created named volumesDaniel J Walsh2021-06-14
|/ | | | | | | | Permission of volume should match the directory it is being mounted on. Fixes: https://github.com/containers/podman/issues/10188 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Support uid,gid,mode options for secretsAshley Cui2021-05-17
| | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* podman image tree: restore previous behaviorValentin Rothberg2021-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initial version of libimage changed the order of layers which has now been restored to remain backwards compatible. Further changes: * Fix a bug in the journald logging which requires to strip trailing new lines from the message. The system tests did not pass due to empty new lines. Triggered by changing the default logger to journald in containers/common. * Fix another bug in the journald logging which embedded the container ID inside the message rather than the specifid field. That surfaced in a preceeding whitespace of each log line which broke the system tests. * Alter the system tests to make sure that the k8s-file and the journald logging drivers are executed. * A number of e2e tests have been changed to force the k8s-file driver to make them pass when running inside a root container. * Increase the timeout in a kill test which seems to take longer now. Reasons are unknown. Tests passed earlier and no signal-related changes happend. It may be CI VM flake since some system tests but other flaked. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #10221 from ashley-cui/envsecOpenShift Merge Robot2021-05-07
|\ | | | | Add support for environment variable secrets
| * Add support for environment variable secretsAshley Cui2021-05-06
| | | | | | | | | | | | | | | | Env var secrets are env vars that are set inside the container but not commited to and image. Also support reading from env var when creating a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Fix infinite loop in isPathOnVolumeSlava Bacherikov2021-05-06
| | | | | | | | | | | | | | | | | | | | filepath.Dir in some cases returns `.` symbol and calling this function again returns same result. In such cases this function never returns and causes some operations to stuck forever. Closes #10216 Signed-off-by: Slava Bacherikov <slava@bacher09.org>
* | Add filepath glob support to --security-opt unmaskDaniel J Walsh2021-05-04
| | | | | | | | | | | | | | | | Want to allow users to specify --security-opt unmask=/proc/*. This allows us to run podman within podman more securely, then specifing umask=all, also gives the user more flexibilty. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Skip blkio-weight test when no kernel BFQ supportChris Evich2021-04-27
|/ | | | | | | Namely the Ubuntu 21.04 Kernel does not support BFQ. Regardless of the distro. skip this test if the required cgroup node doesn't exist. Signed-off-by: Chris Evich <cevich@redhat.com>
* skip pidfile it on remotechenkang2021-04-17
| | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* add utchenkang2021-04-16
| | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* Add --requires flag to podman run/createMatthew Heon2021-04-06
| | | | | | | | | | | | | | | | | | | | Podman has, for a long time, had an internal concept of dependency management, used mainly to ensure that pod infra containers are started before any other container in the pod. We also have the ability to recursively start these dependencies, which we use to ensure that `podman start` on a container in a pod will not fail because the infra container is stopped. We have not, however, exposed these via the command line until now. Add a `--requires` flag to `podman run` and `podman create` to allow users to manually specify dependency containers. These containers must be running before the container will start. Also, make recursive starting with `podman start` default so we can start these containers and their dependencies easily. Fixes #9250 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix podman build --pull-neverDaniel J Walsh2021-03-27
| | | | | | | | | | | Currently pull policy is set incorrectly when users set --pull-never. Also pull-policy is not being translated correctly when using podman-remote. Fixes: #9573 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Validate passed in timezone from tz optionTomSweeneyRedHat2021-03-21
| | | | | | | | | | | | | | | | | | | | | | | | Erik Sjolund reported an issue where a badly formated file could be passed into the `--tz` option and then the date in the container would be badly messed up: ``` erik@laptop:~$ echo Hello > file.txt erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti docker.io/library/alpine cat /etc/localtime Hello erik@laptop:~$ podman --version podman version 3.0.0-rc1 erik@laptop:~$ ``` This fix checks to make sure the TZ passed in is a valid value and then proceeds with the rest of the processing. This was first reported as a potential security issue, but it was thought not to be. However, I thought closing the hole sooner rather than later would be good. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* test: check for io.stat existence on cgroup v2Giuseppe Scrivano2021-03-17
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* test: fix test for last crun/runcGiuseppe Scrivano2021-03-17
| | | | | | | | | there was a documentation issue for the kernel that reported the range to be different than on cgroup v1. The issue has been fixed in crun/runc. Adapt the test. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* test: simplify cgroup pathGiuseppe Scrivano2021-03-17
| | | | | | with cgroup v2, the cgroupns is enabled by default. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Latest crun/runc should handle blkio-weight testDaniel J Walsh2021-03-17
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable cgroupsv2 rw mount via security-opt unmaskJakub Guzik2021-02-28
| | | | Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* test: ignore named hierarchies for cgroups=splitGiuseppe Scrivano2021-02-23
| | | | | | | | | ignore named hierarchies for the --cgroups=split test as crun does not set it. Closes: https://github.com/containers/podman/pull/9302#issuecomment-784157272 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Do not reset storage when running inside of a containerDaniel J Walsh2021-02-16
| | | | | | | | | | | | | | | | | | | | | | | | Currently if the host shares container storage with a container running podman, the podman inside of the container resets the storage on the host. This can cause issues on the host, as well as causes the podman command running the container, to fail to unmount /dev/shm. podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy Since podman is volume mounting in the graphroot, it will add a flag to /run/.containerenv to tell podman inside of container whether to reset storage or not. Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip reset of storage. Also added tests to make sure /run/.containerenv is runnig correctly. Fixes: https://github.com/containers/podman/issues/9191 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* utils: takes the longest path on cgroup v1Giuseppe Scrivano2021-02-11
| | | | | | | | | | | | | | | | | | | | | | now getCgroupProcess takes the longest path on cgroup v1, instead of complaining if the paths are different. This should help when --cgroups=split is used on cgroup v1 and the process cgroups look like: $ cat /proc/self/cgroup 11:pids:/user.slice/user-0.slice/session-4.scope 10:blkio:/ 9:cpuset:/ 8:devices:/user.slice 7:freezer:/ 6:memory:/user.slice/user-0.slice/session-4.scope 5:net_cls,net_prio:/ 4:hugetlb:/ 3:cpu,cpuacct:/ 2:perf_event:/ Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Restart service when CONTAINERS_CONF changesDaniel J Walsh2021-02-09
| | | | | | | | | | Service needs to be restarted in order to read the CONTAINERS_CONF file. Not resetting this can lead to lots of flakes, since the test will use whatever the host system has to be set in it's containers.conf. Fixes: https://github.com/containers/podman/issues/9286 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* Pass DefaultMountsFile to podman buildDaniel J Walsh2021-01-25
| | | | | | | The --default-mounts-file path was not being handled in podman build. This will enable it to use for testing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Containers should not get inheritable caps by defaultDaniel J Walsh2021-01-07
| | | | | | | | | | | | When I launch a container with --userns=keep-id the rootless processes should have no caps by default even if I launch the container with --privileged. It should only get the caps if I specify by hand the caps I want leaked to the process. Currently we turn off capeff and capamb, but not capinh. This patch treats capinh the same way as capeff and capamb. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure that user-specified HOSTNAME is honoredMatthew Heon2021-01-06
| | | | | | | | | | | When adding the HOSTNAME environment variable, only do so if it is not already present in the spec. If it is already present, it was likely added by the user, and we should honor their requested value. Fixes #8886 Signed-off-by: Matthew Heon <mheon@redhat.com>
* SpellingJosh Soref2020-12-22
| | | | Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
* Disable blkio.weight test on UbuntuChris Evich2020-12-15
| | | | | | | | | | | | | | These tests fail with `Error: opening file `io.bfq.weight` for writing: Permission denied: OCI permission denied`. Upon examination of the VMs, it was found the kernel and OS lacks support for the `BFQ` scheduler (which supplies the `weight` option). The only available schedulers are `none` and `mq-deadline`. Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04 (prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and Ubuntu 20.10 were updated to always use CGroupsV2 with crun. Signed-off-by: Chris Evich <cevich@redhat.com>
* security: honor systempaths=unconfined for ro pathsGiuseppe Scrivano2020-12-09
| | | | | | | | | we must honor systempaths=unconfined also for read-only paths, as Docker does: proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #8630 from umohnani8/sec-optOpenShift Merge Robot2020-12-08
|\ | | | | Add systempaths=unconfined option
| * Add systempaths=unconfined optionUrvashi Mohnani2020-12-08
| | | | | | | | | | | | | | | | | | Add the systempaths=unconfined option to --security-opt to match the docker options for unmasking all the paths that are masked by default. Add the mask and unmask options to the podman create doc. Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* | Merge pull request #8561 from mheon/fix_gatingOpenShift Merge Robot2020-12-07
|\ \ | |/ |/| Do not mount sysfs as rootless in more cases
| * Do not mount sysfs as rootless in more casesMatthew Heon2020-12-04
| | | | | | | | | | | | | | | | | | | | | | | | We can't mount sysfs as rootless unless we manage the network namespace. Problem: slirp4netns is now creating and managing a network namespace separate from the OCI runtime, so we can't mount sysfs in many circumstances. The `crun` OCI runtime will automatically handle this by falling back to a bind mount, but `runc` will not, so we didn't notice until RHEL gating tests ran on the new branch. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Add mask and unmask option to --security-optUrvashi Mohnani2020-12-02
|/ | | | | | | | | Add the mask and unmask option to the --security-opt flag to allow users to specify paths to mask and unmask in the container. If unmask=ALL, this will unmask all the paths we mask by default. Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Allow containers to --restart on-failure with --rmDaniel J Walsh2020-11-20
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* use lookaside storage for remote testsbaude2020-11-16
| | | | | | | | | | in an effort to speed up the remote testing, we should be using lookaside storage to avoid pull images as well as importing multiple images into the RW store. one test was removed and added into system test by Ed in #8325 Signed-off-by: baude <bbaude@redhat.com>
* specgen: keep capabilities with --userns=keep-idGiuseppe Scrivano2020-11-02
| | | | | | | | if --userns=keep-id is specified and not --user is specified, take the unprivileged capabilities code path so that ambient capabilities are honored in the container. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* specgen: fix check for root userGiuseppe Scrivano2020-11-02
| | | | | | | if the username is specified in the USER:GROUP form, make sure we only check for USER. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>