| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changes:
- use --timestamp option to produce 'created' stamps
that can be reliably tested in the image-history test
- podman now supports manifest & multiarch run, so we
no longer need buildah
- bump up base alpine & busybox images
This turned out to be WAY more complicated than it should've been,
because:
- alpine 3.14 fixed 'date -Iseconds' to include a colon in
the TZ offset ("-07:00", was "-0700"). This is now consistent
with GNU date's --iso-8601 format, yay, so we can eliminate
a minor workaround.
- with --timestamp, all ADDed files are set to that timestamp,
including the custom-reference-timestamp file that many tests
rely on. So we need to split the build into two steps. But:
- ...with a two-step build I need to use --squash-all, not --squash, but:
- ... (deep sigh) --squash-all doesn't work with --timestamp (#14536)
so we need to alter existing tests to deal with new image layers.
- And, long and sordid story relating to --rootfs. TL;DR that option
only worked by a miracle relating to something special in one
specific test image; it doesn't work with any other images. Fix
seems to be complicated, so we're bypassing with a FIXME (#14505).
And, unrelated:
- remove obsolete skip and workaround in run-basic test (dating
back to varlink days)
- add a pause-image cleanup to avoid icky red warnings in logs
Fixes: #14456
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit e133a06d2f4a3e94bfbd60b647046f2f515c9c24.
@nalind found a proper fix in c/storage [1] to address the performance
issue. So we really don't need the flag anymore. Note the flag has
never made it into any release.
[1] https://github.com/containers/storage/commit/d76b3606fc9ca975bf436379f91105f0fac1555f
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Add a --size option to podman images to allow for disabling computing
the size of listed images. If listing images is critical to
performance, user may chose to turn off size computation to speed things
up.
Context: #13755
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Make sure to ignore local {container,docker}ignore files when building a
local pause image. Otherwise, we may mistakenly not be able to copy
catatonit into the build container.
Fixes: #13529
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Add a fix for RHEL8 gating tests. This resolves yet another
journald/file events/logger mismatch bug.
Also, while I'm at it, more log cleanup: a recently-added test was
missing final rm/rmi, resulting in big red scary output in test logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Force removal of images will also remove associated containers.
Historically, infra containers have been excluded resulting in
rather annoying errors, for instance, when running `rmi -af`.
Since there is not reasons to exclude infra containers, allow for
removing the entire pod when an infra image is force removed.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Leverage new report.Formatter allowing better compatibility from
podman command output.
Follow on PR's will cover containers, etc.
See #10974
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix day-one sloppiness: when I first wrote this framework
it compared strings using 'expr', not '=', to be more
forgiving of extra cruft in output. This was a bad decision.
It means that warnings or additional text are ignored:
is "all is ok, NOT!" "all is ok" <-- this would pass
Solution: tighten up the 'is' check. Use '=' (direct
compare) first. If it fails, look for wild cards ('*')
or character classes ('[') in the expect string. If
so, and only then, use 'expr'. And, thanks to a clever
suggestion from Luap99, include '(using expr)' in the
error message when we do so; this could make it easier
for a developer to understand a string mismatch.
This change exposes a lot of instances in which we weren't
doing proper comparisons. Fix those. Thankfully, there
weren't as many as I'd feared.
Also, and completely unrelated, add '-T' flag to bats
helper, for showing timing results. (I will open this
as a separate PR if requested. I too find it offensive
to jumble together unrelated commits.)
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refactor podman commands that have drifted from using
c/common report pkg. Report pkg is needed to implement
go template functions.
Removed obsolete code from podman which exists in c/common.
Latest template library added default newlines and method to
remove them. Incorporated needed changes in c/common PR below.
Depends on https://github.com/containers/common/pull/624
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1855983
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes: https://github.com/containers/podman/issues/10393
Currently if a user specifies a --root flag to override the location of
the container storage, we still enforce the storage-opts from
storage.conf. This causes issues with people trying to intereact with
the additional stores feature, and then forces them to use the obscure
--storage-opt="" option. I belive this should be the default and we
already do this when the user specifies the --storage-driver option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
| |
Handle empty/bare manifest lists when listing images.
Fixes: #8931
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
| |
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- run test : tweaks to recently-added network-conflict test:
* remove "-d" in run
* confirm exact warning text, and also that container
runs successfully
* test multiple --net options (regression #8057)
- images, run, build, exec tests: add multiple-flag
testing for various flags, confirming as appropriate
whether options are overridden or accumulated.
- ps test : add --filter and --sort tests
- pod test: run 'ping' inside container (confirms that
container gets PING capability)
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- images: confirm that 'podman images' emits headings
even if there are no images present. Intended to
replace e2e test which is difficult to get working
under podman-remote.
- build: add test for #8092, podman-build gobbling stdin.
Workaround needed for issues #8342 and #8343, in which
podman-remote output differs from podman local.
- volumes: add test for #8307, double-lock on same volume.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- images test: add test for 'table' and '\t' formatting
- image mount test: check output from 'umount', test
repeat umount (NOP), and test invalid-umount
- kill test: remove kludgy workaround for crun signal bug
ref: #5004 -- code is no longer needed (fingers crossed),
and the workaround involved pulling an expensive image.
- selinux test: add new tests for shared context in:
* pods , w/ and w/o infra container (ref: #7902)
* containers with namespace sharing: --ipc, --pid, --net
- selinux test: new test for --pid=host (disabled pending
propagation of container-selinux-2.146, ref: #7939)
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- podman network create: new test
- podman pull by-sha + podman images -a (#7651)
- podman image mount: new test
- podman pod: --infra-image and --infra-command (#7167)
For convenience and robustness, build a new testimage
containing a custom file /home/podman/testimage-id
with contents YYYYMMDD (same as image tag). The
image-mount test checks that this file exists and
has the desired content. New testimage also includes
a dummy 'pause' executable, for testing pod infra.
Updates from testimage:20200902 to :20200917
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CI and system tests currently pull some images from docker.io.
Eliminate that, by:
- building a custom image containing much of what we need
for testing; and
- copying other needed images to quay.io
(Reason: effective 2020-11-01 docker.io will limit the
number of image pulls).
The principal change is to create a new quay.io/libpod/testimage,
using the new test/system/build-testimage script, instead of
relying on quay.io/libpod/alpine_labels. We also switch to
using a hardcoded :YYYYMMDD tag, instead of :latest, in an
attempt to futureproof our CI. This image includes 'httpd'
from busybox-extras, which we use in our networking test
(previously we had to pull and run busybox from docker.io).
The testimage can and should be extended as needed for future
tests, e.g. adding test file content or other useful tools.
For the '--pull' tests which require actually pulling from
the registry, I've created an image with the same name but
tagged :00000000 so it will never be pulled by default.
Since this image is only used minimally, it's just busybox.
Unfortunately there remain two cases we cannot solve in
this tiny alpine-based image:
1) docker registry
2) systemd
For those, I've (manually) run:
podman pull [ docker.io/library/registry:2.7 | registry.fedoraproject.org/fedora:31 ]
podman tag !$ quay.io/...
podman push !$
...and amended the calling tests accordingly.
I've tried to make the the smallest reasonable diff, not the
smallest possible one. I hope it's a reasonable tradeoff.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
info, images, run, networking tests: remove some skip_if_remote()s
that were added in the varlink days. All of these tests now seem
to work with APIv2.
help test: check that first output line from 'podman --help'
is the program description (regression check for #7273).
load test: clean up stray images, rewrite test to make it conform
to existing convention. In the process, discover and file #7337
exec test (and networking): file #7360, and add FIXME comment
to skip()s suggesting evaluating those tests once that is fixed.
pod test: now that #6328 is fixed, use 'podman pod inspect --format'
instead of relying on jq
Various other tests: add an explanation of why test is disabled
so we can more easily distinguish "this will never be meaningful
under remote" vs "hey, doesn't work for now, but maybe someday".
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
| |
$ cd test/apiv2
$ python -m unittest -v test_rest_v1_0_0.TestApi
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
| |
Changes made in json output to improve readability of
podman images output.
Signed-off-by: Kunal Kushwaha <kunal.kushwaha@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Looks like a bit of a misunderstanding from early on.
Docker implements --filter=since=IMAGE. Podman implements 'after'
instead of 'since'. Add an equivalent case statement to handle
both, keeping 'after' because we have no way of knowing if it
is used in the field.
Update documentation ... and fix what looks like a complete
misinterpretation of what the code actually does: the man page
claimed that these were time fields, but I don't see any
possible incantation in which a time value works or could
work. Updated docs to reflect IMAGE usage. Also changed
nonworking '==' to single '='.
Added tests. [UPDATE: skip with broken podman-remote]
Fixes: #5040
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As initially written the test does not work other than in
a CI environment because it relies on an empty tag history.
Rewrite so we can guarantee that, by creating a new image.
Also add slightly more helpful tests: the initial tests
would just show "expected 0, got 1" which is unhelpful.
Tweak so we test on actual history contents, which will
show more informative messages on failure.
And, finally, clean up after ourselves.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
| |
We leverage the containers/storage image history tracking feature to
show the previously used image names when running:
`podman images --history`
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
podman-remote now supports rm! That's what we needed to start
running BATS tests.
Although most tests don't actually work, some do, and maybe
the rest will start working over time. For now, disable them.
The only significant difference found is that podman-remote
strips fractional seconds from timestamps in JSON output.
Probably not something worth caring about.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- document a recommended convention for fail-fast tests
- document the requirement for jq. (And, add a fail-fast
test for its presence; remove the duplicated checks
in subtests)
- add further sanity checks to 'help' test. Add missing
documentation. Remove a no-longer-needed workaround for
usage-message bug fixed in #2486
- add a documented TEMPLATE
- and, since we're at 1.1, enable 'Remote API' check in
version test
- better diagnostics in setup/teardown; add vim filetype hint;
better formatting of actual-vs-expect errors
- new pod-top, logs, build tests
- improve error messages
- add $IMAGE alias for ridiculous $PODMAN_TEST_IMAGE_FQN
- final cleanup, in prep for merge
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
|
|
Initial attempt at writing a framework for podman system tests.
The idea is to define a useful set of primitives that will
make it easy to write actual tests and to interpret results
of failing ones.
This is a proof-of-concept right now; only a small number of
tests, by no means comprehensive. I am requesting review in
order to find showstopper problems: reasons why this approach
cannot work. Should there be none, we can work toward running
these as gating tests for Fedora and RHEL8.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
