summaryrefslogtreecommitdiff
path: root/test/system/030-run.bats
Commit message (Collapse)AuthorAge
* Allow users to add host user accounts to /etc/passwdDaniel J Walsh2021-12-23
| | | | | | | | | | | Some containers require certain user account(s) to exist within the container when they are run. This option will allow callers to add a bunch of passwd entries from the host to the container even if the entries are not in the local /etc/passwd file on the host. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Warn on use of --kernel-memoryDaniel J Walsh2021-12-22
| | | | | | | | | It has been deprecated and is no longer supported. Fully remove it and only print a warning if a user uses it. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* support hosts without /etc/hostsValentin Rothberg2021-12-22
| | | | | Fixes: #12667 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* support advanced network configuration via cliPaul Holzinger2021-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | Rework the --network parse logic to support multiple networks with specific network configuration settings. --network can now be set multiple times. For bridge network mode the following options have been added: - **alias=name**: Add network-scoped alias for the container. - **ip=IPv4**: Specify a static ipv4 address for this container. - **ip=IPv6**: Specify a static ipv6 address for this container. - **mac=MAC**: Specify a static mac address address for this container. - **interface_name**: Specify a name for the created network interface inside the container. So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99 for the default bridge network as well as for network names. This is better than using --ip because we can set the ip per network without any confusion which network the ip address should be assigned to. The --ip, --mac-address and --network-alias options are still supported but --ip or --mac-address can only be set when only one network is set. This limitation already existed previously. The ability to specify a custom network interface name is new Fixes #11534 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Semiperiodic cleanup of obsolete Skip()sEd Santiago2021-11-19
| | | | | | | | | | | | | | Found by my find-obsolete-skips script. Let's see which, if any, of these skipped tests can be reenabled. Some Skips are "this will never work", not "this is expected to work one day". Update the message on those to reflect that. Some were real bugs in the test framework. Fix those. And, joy of joys, some work today. Remove those skips. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add --unsetenv & --unsetenv-all to remove def environment variablesDaniel J Walsh2021-11-15
| | | | | | | | | | | | | | | | Podman adds a few environment variables by default, and currently there is no way to get rid of them from your container. This option will allow you to specify which defaults you don't want. --unsetenv-all will remove all default environment variables. Default environment variables can come from podman builtin, containers.conf or from the container image. Fixes: https://github.com/containers/podman/issues/11836 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman run --memory=0 ... should not set memory limitDaniel J Walsh2021-10-19
| | | | | | | | | On Docker this is ignored, and it should be on Podman as well. This is documented in the man page. Fixes: https://github.com/containers/podman/issues/12002 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* libpod: fix race when closing STDINPaul Holzinger2021-10-06
| | | | | | | | | | | | | | | | There is a race where `conn.Close()` was called before `conn.CloseWrite()`. In this case `CloseWrite` will fail and an useless error is printed. To fix this we move the the `CloseWrite()` call to the same goroutine to remove the race. This ensures that `CloseWrite()` is called before `Close()` and never afterwards. Also fixed podman-remote run where the STDIN was never was closed. This is causing flakes in CI testing. [NO TESTS NEEDED] Fixes #11856 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* System tests: tighten 'is' operatorEd Santiago2021-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix day-one sloppiness: when I first wrote this framework it compared strings using 'expr', not '=', to be more forgiving of extra cruft in output. This was a bad decision. It means that warnings or additional text are ignored: is "all is ok, NOT!" "all is ok" <-- this would pass Solution: tighten up the 'is' check. Use '=' (direct compare) first. If it fails, look for wild cards ('*') or character classes ('[') in the expect string. If so, and only then, use 'expr'. And, thanks to a clever suggestion from Luap99, include '(using expr)' in the error message when we do so; this could make it easier for a developer to understand a string mismatch. This change exposes a lot of instances in which we weren't doing proper comparisons. Fix those. Thankfully, there weren't as many as I'd feared. Also, and completely unrelated, add '-T' flag to bats helper, for showing timing results. (I will open this as a separate PR if requested. I too find it offensive to jumble together unrelated commits.) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Support DeviceCgroupRules to actually get added.Daniel J Walsh2021-07-21
| | | | | | Fixes: https://github.com/containers/podman/issues/10302 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* System tests: add :Z to volume mountsEd Santiago2021-06-01
| | | | | | | | | | | | | | | | | | | | | | | selinux-policy-34.9-1.fc34 breaks a behavior we've relied on since (at least) January 2020: - Revert "Add permission open to files_read_inherited_tmp_files() interface" That's probably the correct thing to do, but it breaks our existing tests. Solution: add ':Z' where needed. Tested on Ed's laptop, which has the offending selinux-policy as of 2021-05-31. Tests pass root and rootless. (I mention this because tests will obviously pass in CI, which has a much older selinux-policy). Also: add a 'podman rmi' for cleanup in one test, to avoid noise in test logs. Fixes: #10522 Signed-off-by: Ed Santiago <santiago@redhat.com>
* Improve OCI Runtime errorDaniel J Walsh2021-05-22
| | | | | | | | | | | | | ErrOCIRuntimeNotFound error is misleading. Try to make it more understandable to the user that the OCI Runtime IE crun or runc is not missing, but the command they attempted to run within the container is missing. [NO TESTS NEEDED] Regular tests should handle this. Fixes: https://github.com/containers/podman/issues/10432 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Create the /etc/mtab file if does not existsDaniel J Walsh2021-05-15
| | | | | | | | | | | We should create the /etc/mtab->/proc/mountinfo link so that mount command will work within the container. Docker does this by default. Fixes: https://github.com/containers/podman/issues/10263 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #10157 from edsantiago/batsOpenShift Merge Robot2021-04-28
|\ | | | | System tests: fix two race conditions
| * System tests: fix two race conditionsEd Santiago2021-04-27
| | | | | | | | | | | | | | Basically, add 'podman wait' before 'podman rm'. See if this fixes gating tests run on ppc64le (possibly very very slow hosts) Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Add podman run --timeout optionDaniel J Walsh2021-04-23
|/ | | | | | | | | This option allows users to specify the maximum amount of time to run before conmon sends the kill signal to the container. Fixes: https://github.com/containers/podman/issues/6412 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* system tests: new interactive testsEd Santiago2021-03-25
| | | | | | | | socat can create a dummy PTY that we can manipulate. This lets us run a variety of tests that we couldn't before, involving "run -it", and stty, and even "load" with no args. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Check if stdin is a term in --interactive --tty modeDaniel J Walsh2021-03-24
| | | | | | | | | | | | | | | | If you are attempting to run a container in interactive mode, and want a --tty, then there must be a terminal in use. Docker exits right away when a user specifies to use a --interactive and --TTY but the stdin is not a tty. Currently podman will pull the image and then fail much later. Podman will continue to run but will print an warning message. Discussion in : https://github.com/containers/podman/issues/8916 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* system test image: build it multiarchEd Santiago2021-02-24
| | | | | | | | | | | | | | buildah now supports running under emulation[1] as well as creating manifests. Use those features to create a multiarch testimage that can be used to test podman on other arches. [1] on Fedora 33, this requires the qemu-user-static package We also build a new :00000001 image, replacing :00000000, because (sigh) some tests try to run 'true' in the container. Include instructions on building said image. Signed-off-by: Ed Santiago <santiago@redhat.com>
* do not set empty $HOMEValentin Rothberg2021-02-16
| | | | | | | | | | | Make sure to not set an empty $HOME for containers and let it default to "/". https://github.com/containers/crun/pull/599 is required to fully address #9378. Partially-Fixes: #9378 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* fix logic when not creating a workdirValentin Rothberg2021-02-05
| | | | | | | | | | | When resolving the workdir of a container, we may need to create unless the user set it explicitly on the command line. Otherwise, we just do a presence check. Unfortunately, there was a missing return that lead us to fall through into attempting to create and chown the workdir. That caused a regression when running on a read-only root fs. Fixes: #9230 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* System test for #9096 (truncated stdout)Ed Santiago2021-02-02
| | | | | | | | | | | This actually tests conmon, not podman; but that's the whole point of system tests in the first place: if a problem exists, we want to fail loudly, no matter whose fault it is. (I can't get this to fail on my f33 laptop; OP on #9096 claims it only fails on Ubuntu. We'll see what happens in CI). Signed-off-by: Ed Santiago <santiago@redhat.com>
* workdir presence checksValentin Rothberg2021-01-26
| | | | | | | | | | | | | | | | | | A container's workdir can be specified via the CLI via `--workdir` and via an image config with the CLI having precedence. Since images have a tendency to specify workdirs without necessarily shipping the paths with the root FS, make sure that Podman creates the workdir. When specified via the CLI, do not create the path, but check for its existence and return a human-friendly error. NOTE: `crun` is performing a similar check that would yield exit code 127. With this change, however, Podman performs the check and yields exit code 126. Since this is specific to `crun`, I do not consider it to be a breaking change of Podman. Fixes: #9040 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #8730 from rhatdan/logOpenShift Merge Robot2020-12-16
|\ | | | | Add LogSize to container inspect
| * Add LogSize to container inspectDaniel J Walsh2020-12-15
| | | | | | | | | | | | | | Other log options are available so we need to add ability to look up LogSize. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | system tests: the catch-up gameEd Santiago2020-12-14
|/ | | | | | | | | | | | | | | | | | | | | | | | | - run test: minor cleanup to .containerenv test. Basically, make it do only two podman-runs (they're expensive) and tighten up the results checks - ps test: add ps -a --storage. Requires small tweak to run_podman helper, so we can have "timeout" be an expected result - sdnotify test: workaround for #8718 (seeing MAINPID=xxx as last output line instead of READY=1). As found by the newly-added debugging echos, what we are seeing is: MAINPID=103530 READY=1 MAINPID=103530 It's not supposed to be that way; it's supposed to be just the first two. But when faced with reality, we must bend to accommodate it, so let's accept READY=1 anywhere in the output stream, not just as the last line. Signed-off-by: Ed Santiago <santiago@redhat.com>
* RHEL gating tests: more journald exceptionsEd Santiago2020-12-14
| | | | | | | | | | | | | | | | | | | | Followup to #8284, due to my not having noticed #8096. RHEL gating tests are failing again due to rhbz#1895105, the one where we can't run journalctl rootless on RHEL. #8284 fixed this for some RHEL builds of older podman, but I missed #8096 which added yet another logs test. This brings us to three journalctl exceptions, which means it gets complicated because I have to refactor it all. **THIS IS NOT SUSTAINABLE**. We need some way to have a similar setup in CI, with a permission-less rootless login, so we don't add yet another logs test some day and discover, months later, that it doesn't work on RHEL and then have to go into crisis mode. Signed-off-by: Ed Santiago <santiago@redhat.com>
* add comment to #8558 regression testValentin Rothberg2020-12-07
| | | | | | | As suggested by @edsantiago, add a comment to the regression test of #8558 to better document the context. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* container create: do not clear image nameValentin Rothberg2020-12-07
| | | | | | | | When creating a container, do not clear the input-image name before looking up image names. Also add a regression test. Fixes: #8558 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add containerenv information to /run/.containerenvDaniel J Walsh2020-12-03
| | | | | | | | | | | | | We have been asked to leak some information into the container to indicate: * The name and id of the container * The version of podman used to launch the container * The image name and ID the container is based on. * Whether the container engine is running in rootless mode. Fixes: https://github.com/containers/podman/issues/6192 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* BATS: add ping testEd Santiago2020-12-01
| | | | | | | | | | | | | | | | | | | - run test : tweaks to recently-added network-conflict test: * remove "-d" in run * confirm exact warning text, and also that container runs successfully * test multiple --net options (regression #8057) - images, run, build, exec tests: add multiple-flag testing for various flags, confirming as appropriate whether options are overridden or accumulated. - ps test : add --filter and --sort tests - pod test: run 'ping' inside container (confirms that container gets PING capability) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #8230 from mheon/port_net_host_conflictOpenShift Merge Robot2020-11-30
|\ | | | | Ensure that --net=host/pod/container conflicts with -p
| * Ensure that --net=host/pod/container/none warn with -pMatthew Heon2020-11-04
| | | | | | | | | | | | | | | | | | | | | | | | Setting port mappings only works when CNI is configuring our network (or slirp4netns, in the rootless case). This is not the case with `--net=host`, `--net=container:`, and joining the network namespace of the pod we are part of. Instead of allowing users to do these things and then be confused why they do nothing, let's match Docker and return a warning that your port mappings will do nothing. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | system tests: skip journald tests on RHEL8Ed Santiago2020-11-09
| | | | | | | | | | | | | | | | (actually, on any system exhibiting the symptom wherein journalctl fails due to insufficient permissions, which for all practical purposes means only RHEL8) Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Podman often reports OCI Runtime does not exist, even if it doesDaniel J Walsh2020-10-29
|/ | | | | | | | | | | | | | | | | | | When the OCI Runtime tries to set certain settings in cgroups it can get the error "no such file or directory", the wrapper ends up reporting a bogus error like: ``` Request Failed(Internal Server Error): open io.max: No such file or directory: OCI runtime command not found error {"cause":"OCI runtime command not found error","message":"open io.max: No such file or directory: OCI runtime command not found error","response":500} ``` On first reading of this, you would think the OCI Runtime (crun or runc) were not found. But the error is actually reporting message":"open io.max: No such file or directory Which is what we want the user to concentrate on. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* System tests: cleanup, make more robustEd Santiago2020-10-26
| | | | | | | | | | | | - run test: preserve --runtime test: use a random executable path. And, clean up better. - run test: "look up correct image name" test: use random strings; test both without and with a :tag - events test: use random label strings, add more filter tests Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #8096 from ypu/log-driver-testOpenShift Merge Robot2020-10-25
|\ | | | | Tests: Check different log driver can work with podman logs
| * Tests: Check different log driver can work with podman logsYiqiao Pu2020-10-22
| | | | | | | | | | | | | | | | Add a check step in podman run --log-driver test. Prefer to add it here as it already has a loop to cover all different drivers in this test. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* | container create: record correct image nameValentin Rothberg2020-10-21
|/ | | | | | | | | | Record the correct image name when creating a container by using the resolved image name if present. Otherwise, default to using the first available name or an empty string in which case the image must have been referenced by ID. Fixes: #8082 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add a system test to verify --runtime is preservedMatthew Heon2020-10-20
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* System tests: remove some misleading 'run'sEd Santiago2020-10-19
| | | | | | | | | | | | | | | The BATS 'run' directive is really quite obnoxious; for the most part we really don't want to use it. Remove some uses that snuck in last week, and remove one test (exists) that can more naturally be piggybacked into an rm test. While we're at it: in setup(), look for and delete stray external (buildah) containers. This will be important if any of the external-container tests fails; this way we don't leave behind a state that causes subsequent tests to fail. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add support for external containerDaniel J Walsh2020-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | External containers are containers created outside of Podman. For example Buildah and CRI-O Containers. $ buildah from alpine alpine-working-container $ buildah run alpine-working-container touch /test $ podman container exists --external alpine-working-container $ podman container diff alpine-working-container C /etc A /test Added --external flag to refer to external containers, rather then --storage. Added --external for podman container exists and modified podman ps to use --external rather then --storage. It was felt that --storage would confuse the user into thinking about changing the storage driver or options. --storage is still supported through the use of aliases. Finally podman contianer diff, does not require the --external flag, since it there is little change of users making the mistake, and would just be a pain for the user to remember the flag. podman container exists --external is required because it could fool scripts that rely on the existance of a Podman container, and there is a potential for a partial deletion of a container, which could mess up existing users. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* fix podman container exists and diff for storage containersDaniel J Walsh2020-10-15
| | | | | | | | | | | | Current these commands only check if a container exists in libpod. With this fix, the commands will also check if they are in containers/storage. This allows users to look at differences within a buildah or CRI-O container. Currently buildah diff does not exists, so this helps out in that situation as well as in CRI-O since the cri does not implement a diff command. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* System test additionsEd Santiago2020-10-14
| | | | | | | | | | | | | | | | | | | | | | | | - run --userns=keep-id: confirm that $HOME gets set (#8013) - inspect: confirm that JSON output is a sane number of lines (10 or more), not an unreadable one-liner (#8011 and #8021). Do so with image, pod, network, volume because the code paths might be different. - cgroups: confirm that 'run' preserves cgroup manager (#7970) - sdnotify: reenable tests, and hope CI doesn't hang. This test was disabled on August 18 because CI jobs were hanging and timing out. My suspicion was that it was #7316, which in turn seems to have hinged on conmon #182. The latter was merged on Sep 16, so let's cross our fingers and see what happens. Also: remove inaccurate warning from a networking test. And, wow, fix is_cgroupsv2(), it has never actually worked. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #7820 from giuseppe/fix-capabilities-not-rootOpenShift Merge Robot2020-09-30
|\ | | | | capabilities: always set ambient and inheritable
| * capabilities: always set ambient and inheritableGiuseppe Scrivano2020-09-30
| | | | | | | | | | | | | | | | | | | | | | | | change capabilities handling to reflect what docker does. Bounding: set to caplist Inheritable: set to caplist Effective: if uid != 0 then clear; else set to caplist Permitted: if uid != 0 then clear; else set to caplist Ambient: clear Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #7832 from edsantiago/bats_run_tzOpenShift Merge Robot2020-09-30
|\ \ | | | | | | System tests: add podman run --tz
| * | System tests: add podman run --tzEd Santiago2020-09-29
| |/ | | | | | | | | | | | | | | New tests for podman run --tz=EXPLICIT and =local. Requires updating our testimage by adding a fixed reference timestamp to a known file path. Signed-off-by: Ed Santiago <santiago@redhat.com>
* / System tests: corner case for run --pullEd Santiago2020-09-29
|/ | | | | | | | | | | | | | | | Obscure corner case in which 'podman run --pull=never alpine' will actually pass *with no alpine image* if there's an image named "myalpine". (i.e. a substring match, not full string match). Fixed in #7770 but the tests that were added there do not actually test that. This adds a double-duty test for that as well as making sure that 'run --pull=never SHORTNAME' (implicit :latest) does not match our existing :YYYYMMDD image; then one more quick test to make sure that if we tag as :latest, the same --pull=never succeeds. Signed-off-by: Ed Santiago <santiago@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-08 09:03:06 +0000