| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Followup to #14957, which added a new test that doesn't
actually belong in the 250-systemd.bats file. It was
copy-pasted from another test that doesn't belong there.
Move both tests to a new .bats file, because (1) they
need a custom cleanup, and (2) one of the tests should
very definitely run under podman-remote, and the 250
bats file has a global skip_if_remote().
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Docker supports -H and --host for specify the listening socket. Podman
should support them also in order to match the CLI.
These will not be documented since Podman defaults to using the
--url option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
With the upcoming plans of introducing a podman-kube command with
various subcommands, rename the podman-play-kube systemd template
to podman-kube before releasing it.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
I noticed 'rmi -a' in a test. I tried to fix it. Hilarity ensued.
'rmi -a' is evil: it forces a fresh pull of our test image,
which in turn almost guarantees a flake some day. We avoid
it, but once in a while it slips in.
While fixing it, I noticed a bevy of other problems that
needed cleanup.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 1951ff168a63157fa2f4711fde283edfc4981ed3 introduced a check so
that conmon is not moved to a new cgroup when podman is running inside
of a systemd service. This is helpful to integrate podman in systemd
so that the spawned conmon lives in the same cgroup as the service
that created it.
Unfortunately this breaks when podman daemon is running in a systemd
service since the same check is in place thus all the conmon processes
end up in the same cgroup as the podman daemon. When the podman
daemon systemd service stops the conmon processes are also terminated
as well as the containers they monitor.
Improve the check to exclude podman running as a daemon.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2052697
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
`podman auto-update` is now properly exercised in the system tests, so
we can safely remove the outdated TODO.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support running `podman play kube` in systemd by exploiting the
previously added "service containers". During `play kube`, a service
container is started before all the pods and containers, and is stopped
last. The service container communicates its conmon PID via sdnotify.
Add a new systemd template to dispatch such k8s workloads. The argument
of the template is the path to the k8s file. Note that the path must be
escaped for systemd not to bark:
Let's assume we have a `top.yaml` file in the home directory:
```
$ escaped=$(systemd-escape ~/top.yaml)
$ systemctl --user start podman-play-kube@$escaped.service
```
Closes: https://issues.redhat.com/browse/RUN-1287
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: the system test 'is()' checker was poorly thought out.
For example, there is no way to check for inequality or for
absence of a substring.
Solution, step 1: introduce new assert(), copied almost verbatim
from buildah, where it has been successful in addressing the
gaps in is().
The logical next step is to search the tests for 'die' and
for 'run', looking for negative assertions which we can
replace with assert(). There were a lot, and in the process
I found a number of ugly bugs in the tests themselves. I've
taken the liberty of fixing these.
Important note: at this time we have both assert() and is().
Replacing all instances of is() would be impossible to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
systemd expects the container_uuid environment variable be set
when it is running in a container.
Fixes: https://github.com/containers/podman/issues/13187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When running podman inside systemd user units, it is possible that
systemd kills the rootless netns slirp4netns process because it was
started in the default unit cgroup. When the unit is stopped all
processes in that cgroup are killed. Since the slirp4netns process is
run once for all containers it should not be killed. To make sure
systemd will not kill the process we move it to the user.slice.
Fixes #13153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
move the check after the cgroup manager is set, so to correctly detect
--cgroup-manager=cgroupfs and do not raise a warning about dbus not
being present.
Closes: https://github.com/containers/podman/issues/12802
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
Make sure to preserve the quoting of entrypoint JSON strings.
Fixes: #12477
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Replace `multi-user.target` with `default.target` across the code base.
It seems like the multi-user one is not available for (rootless) users
on F35 anymore is causing issues in all kinds of ways, for instance,
enabling the podman.service or generated systemd units.
Fixes: #12438
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
| |
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
|
| |
|
|
| |
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
|
| |
|
|
| |
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Handle custom restart policies of containers when generating the unit
files; those should be set on the unit level and removed from ExecStart
flags.
Fixes: #11438
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make sure that Podman passes the LISTEN_* environment into containers.
Similar to runc, LISTEN_PID is set to 1.
Also remove conditionally passing the LISTEN_FDS as extra files.
The condition was wrong (inverted) and introduced to fix #3572 which
related to running under varlink which has been dropped entirely
with Podman 3.0. Note that the NOTIFY_SOCKET and LISTEN_* variables
are cleared when running `system service`.
Fixes: #10443
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 9ac5267 changed the type of the generated systemd units from
`forking` to `notify`. It further stopped using `--cidfile` and instead
intended systemd to take care of stopping the container, which turned
out to be a bad idea.
Systemd will send the stop/kill signals to conmon which in turn may exit
non-zero, depending on the signal, and ultimately breaking container
cleanup.
Hence, we need to use --cidfile again and let podman stop and remove the
container to make sure that everything's in order.
Fixes: #11304
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 70801b3d714b067d64744697433c5841926dad4d.
It turns out that letting systemd handle stopping the container is not
working as I thought it will. Conmon is receiving the stop/kill signals
and may exit non-zero, which in turn lets the systemd service transition
into the `failed` state.
We need to get back to letting Podman stop the containers and do a
partial revert of commit 9ac5267 which removed using --cidfile.
Happening in a following commit.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 9ac5267598c3 changed the type of the generated systemd units from
forking to notify. Parts of these changes was also removing the need to
pass any information via the file system (e.g., PIDFILE, container ID).
That in turn implies that systemd takes care of stopping the container.
By default, systemd first sends a SIGTERM and after a certain timeout,
it'll send a SIGKILL. That's pretty much what Podman is doing, unless
the container was created with a custom stop signal which is the case
when the --stop-signal flag was used or systemd is mounted.
Account for that by using systemd's KillSignal option which allows for
changing SIGTERM to another signal. Also make sure that we're using the
correct timeout for units generated with --new.
Fixes: #11304
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First and foremost: use ephemeral (/run, $XDG) directories
for systemd unit files, so as not to vandalize a working system.
Second, refactor common systemd-related functionality into
a new helper file, loaded by the systemd-related tests.
Shared functionality includes:
* setting $XDG_RUNTIME_DIR if unset and rootless
* setting $UNIT_DIR for use by tests
* new systemctl() and journalctl() functions, which
include "--user" when rootless (why can't systemd
figure this out on its own?)
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The rather raw and scarce output of `podman auto-update` has been a
thorn in my eyes for a longer while. So far, Podman would only print
updated systemd units, one per line, without further formatting.
Motivated by issue #9949 which is asking for some more useful
information in combination with a dry-run feature, I sat down and
reflected which information may come in handy.
Running `podman auto-update` will now look as follows:
```
$ podman auto-update
Trying to pull [...]
UNIT CONTAINER IMAGE POLICY UPDATED
container-test.service 08fd34e533fd (test) localhost:5000/busybox registry false
```
Also refactor the spaghetti code in the backend a bit to make it easier
to digest and maintain.
For easier testing and for the sake of consistency with other commands
listing output, add a `--format` flag.
The man page will get an overhaul in a follow up commit.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The with --new generated systemd unit loses the environment variables
when the create command only contains the key without the value. Since
podman tries to lookup those values from the environment the unit can
fail.
This commits ensures that we will add the environment variables to the
unit file when this is the case. The container environment variables are
looked up in the container spec.
Fixes #10101
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
changed struct to policyMapper
change "image" to "registry" in multiple locations
Updated documentation with registry alias & autoupdate local
Added relevant test
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Record the user-specified "raw" image name in the SpecGenerator, so we
can pass it along to the config when creating a container. We need a
separate field as the image name in the generator may be set to the
ID of the previously pulled image - ultimately the cause of #7404.
Reverting the image name from the ID to the user input would not work
since "alpine" for pulling iterates over the search registries in the
registries.conf but looking up "alpine" normalizes to
"localhost/alpine".
Recording the raw-image name directly in the generator was the best of
the options I considered as no hidden magic from search registries or
normalizations (that may or may not change in the future) can interfere.
The auto-update backend enforces that the raw-image name is a
fully-qualified reference, so we need to worry about that in the front
end.
Fixes: #7407
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
info, images, run, networking tests: remove some skip_if_remote()s
that were added in the varlink days. All of these tests now seem
to work with APIv2.
help test: check that first output line from 'podman --help'
is the program description (regression check for #7273).
load test: clean up stray images, rewrite test to make it conform
to existing convention. In the process, discover and file #7337
exec test (and networking): file #7360, and add FIXME comment
to skip()s suggesting evaluating those tests once that is fixed.
pod test: now that #6328 is fixed, use 'podman pod inspect --format'
instead of relying on jq
Various other tests: add an explanation of why test is disabled
so we can more easily distinguish "this will never be meaningful
under remote" vs "hey, doesn't work for now, but maybe someday".
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Run `podman auto-update` in the systemd system tests. Note that this is
a first step to at least exercise parts of `auto-update` in the CI. The
service won't get updated just yet as we need to set up a local
registry, and push a new image. I do not have enough time at the moment
to do that but consider this change already as an improvement.
We are experiencing some issues in #6793 w.r.t. to auto-updates but
couldn't track down the root cause yet.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Three small fixes for breaking tests on rawhide:
1) run test: looks like runc changed the format of
an error message, adding a colon in one place.
runc is used on rawhide when booted in cgroups v1
2) volumes test: difference in exit status and error
message between runc and crun.
3) systemd test: define XDG_RUNTIME_DIR if unset.
podman helpfully sets this to a reasonable default,
but the 'systemctl' commands used in this test do not.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
run test: run positive test before negative; and actually
implement real negative tests. Also, add confirmation tests for
cidfile/pidfile, not just 'exit status is good'.
systemd test: enable rootless, and again add actual content
testing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
|
|
The systemd unit test never ran in CI and was broken for various
reasons. Fix the test to execute Podman in systemd units and to also
run generated units files.
Note: more tests will be added in the future. The simple check for now
will prevent regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
