summaryrefslogtreecommitdiff
path: root/test/system
Commit message (Collapse)AuthorAge
* Add --preservefds to podman runQi Wang2020-06-19
| | | | | | Add --preservefds to podman run. close https://github.com/containers/libpod/issues/6458 Signed-off-by: Qi Wang <qiwan@redhat.com>
* CI: force registry:2.6Valentin Rothberg2020-06-19
| | | | | | | | | | | For using the `registry:2.6` image. 2.7 and beyond dropped the `htpasswd` binary from the rootfs which parts of our CI depends on. While this is not a sustainable solution (assuming `htpasswd` is gone for ever), it unblocks the CI for now. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Handle dropping capabilties correctly when running as non root userDaniel J Walsh2020-06-17
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* BATS and APIv2: more tests and tweaksEd Santiago2020-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - (minor): apiv2 tests: check for full ID Observation made while reviewing #6461: tests were checking only for a 12-character container/image ID in return value. It's actually 64, and we should test for that. This should also minimize confusion in a future maintainer. - podman pause/unpause: new test Runs a 'date/sleep' loop, pauses container, sleeps 3s, restarts, then confirms that there's a 3- to 6-second gap in the logs for the container. - podman healthcheck: new test run a container with healthcheck, test both healthy and unhealthy conditions - podman pod: check '{{.Pod}}' field in podman ps Hey, as long as we have a pod with two running containers, might as well confirm that 'podman ps' returns the expected pod ID. Signed-off-by: Ed Santiago <santiago@redhat.com>
* system tests : more testsEd Santiago2020-06-01
| | | | | | | | | | | | | | - exec: add test for #5046, in which conmon swallowed chars on a large byte transfer - pod: add 'pod exists' tests, both positive and negative; consolidate tests; add '--label', and check in 'pod inspect' add 'pod ps' tests - networking: add test for #5466, in which detached run with --userns=keep-id would not forward a port Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #5594 from edsantiago/batsOpenShift Merge Robot2020-05-30
|\ | | | | system tests: enable skopeo REGISTRY_AUTH_FILE
| * system tests: enable skopeo REGISTRY_AUTH_FILEEd Santiago2020-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | skopeo pr #829 adds REGISTRY_AUTH_FILE support; this lets us enable the following test: podman login - shares credentials with skopeo - via envariable (I seriously doubt that the CI VMs have been updated with the new skopeo, but I can leave this PR in limbo until that happens. Otherwise I'll forget to enable the test). Signed-off-by: Ed Santiago <santiago@redhat.com>
* | V2 verify JSON output is consistent and doesn't driftJhon Honce2020-05-28
| | | | | | | | | | | | | | $ cd test/apiv2 $ python -m unittest -v test_rest_v1_0_0.TestApi Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Add --format to pod inspectBoaz Shuster2020-05-27
| | | | | | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | Merge pull request #6331 from sujil02/iidfile-battestOpenShift Merge Robot2020-05-22
|\ \ | | | | | | Enables iidfile test as issue fixed now
| * | Enables iidfile test as issue fixed nowSujil022020-05-21
| | | | | | | | | | | | Signed-off-by: Sujil02 <sushah@redhat.com>
* | | podman version --format ... was not workingDaniel J Walsh2020-05-21
|/ / | | | | | | | | | | This patch fixes the podman --version --format command. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #6280 from mheon/switch_off_noexecOpenShift Merge Robot2020-05-21
|\ \ | | | | | | Turn off 'noexec' option by default for named volumes
| * | Turn off 'noexec' option by default for named volumesMatthew Heon2020-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | We previously enforced this for security reasons, but as Dan has explained on several occasions, it's not very valuable there (it's trivially easy to bypass) and it does seriously annoy folks trying to use named volumes. Flip the default from 'on' to 'off'. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | | system tests: more podman-pod testsEd Santiago2020-05-20
|/ / | | | | | | | | | | | | | | * rename pod-top.bats to pod.bats * add test for TCP port communication between pods * add test for various podman-pod-create options Signed-off-by: Ed Santiago <santiago@redhat.com>
* | system tests: small fixes for rawhide+cgroups v1Ed Santiago2020-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Three small fixes for breaking tests on rawhide: 1) run test: looks like runc changed the format of an error message, adding a colon in one place. runc is used on rawhide when booted in cgroups v1 2) volumes test: difference in exit status and error message between runc and crun. 3) systemd test: define XDG_RUNTIME_DIR if unset. podman helpfully sets this to a reasonable default, but the 'systemctl' commands used in this test do not. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | system tests: add volume testsEd Santiago2020-05-12
| | | | | | | | Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Some BATS cleanup: run and systemd testsEd Santiago2020-05-11
| | | | | | | | | | | | | | | | | | | | | | run test: run positive test before negative; and actually implement real negative tests. Also, add confirmation tests for cidfile/pidfile, not just 'exit status is good'. systemd test: enable rootless, and again add actual content testing. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | fix and enable systemd system testsValentin Rothberg2020-05-08
| | | | | | | | | | | | | | | | | | | | | | The systemd unit test never ran in CI and was broken for various reasons. Fix the test to execute Podman in systemd units and to also run generated units files. Note: more tests will be added in the future. The simple check for now will prevent regressions. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | set --conmon-pidfileValentin Rothberg2020-05-08
| | | | | | | | | | | | | | The --conmon-pidfile was not set in the spec leading to failing systemd units. Also add a system test to prevent future regressions. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | BATS help test: check usage stringEd Santiago2020-05-05
| | | | | | | | | | | | | | | | | | | | Now that we've agreed that usage messages should match what the user typed, confirm it. IOW 'podman foo --help' should not issue a usage message for 'podman container foo'. Fix one broken instance, 'unpause'. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | fix commands without inputbaude2020-04-30
| | | | | | | | | | | | in cases where commands require input and we dont provide it, we often would segv. This can be attributed in many cases to the subcommand not picked up the cobra Args attribute or neither had them. Signed-off-by: baude <bbaude@redhat.com>
* | System tests: help messages: check required-argEd Santiago2020-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a usage message is of the form '... [flags] ARGNAME', where ARGNAME is all-caps and not in brackets, it must be a required argument. Try running podman subcommand without ARGNAME, and make sure that podman bails out with an informative message. (Since this message is freeform in each subcommand, not Cobra-generated, we have a lot of possible variations to check for). Fix podman login/logout Use messages to indicate that REGISTRY is now optional (as of #5233). This test has actually been in place for over a year but due to a typo on my part -- a missing space -- it was not being run. "For want of a space, much testing was lost". Signed-off-by: Ed Santiago <santiago@redhat.com>
* | enable final system testbaude2020-04-29
| | | | | | | | Signed-off-by: baude <bbaude@redhat.com>
* | login system test: enable "push ok"Valentin Rothberg2020-04-29
|/ | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* generate systemdValentin Rothberg2020-04-29
| | | | | | | Implement `podman generate systemd` for Podman v2 and enable associated tests. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* system tests must passBrent Baude2020-04-28
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* Fixes for system testsBrent Baude2020-04-17
| | | | | | Various fixes to protect against regressions in system tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* Fixes for load and other system testsBrent Baude2020-04-13
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* refactor infoBrent Baude2020-04-06
| | | | | | the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Improved readability in image json outputKunal Kushwaha2020-03-22
| | | | | | | Changes made in json output to improve readability of podman images output. Signed-off-by: Kunal Kushwaha <kunal.kushwaha@gmail.com>
* run --rmi test: make it workEd Santiago2020-03-12
| | | | | | | | | | | | The recently-added 'run --rmi' test was not actually doing what it thinks it was doing: for one, 'run_podman | grep' is never going to work; also, the test was leaving behind stray images. Rework to do what I believe the intention was; and, combine into one test (down from two) for readability. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add the rmi flag to podman-run to delete container imageBoaz Shuster2020-03-03
| | | | | | | | | | The --rmi flag will delete the container image after its execution unless that image is already been used by another container(s). This is useful when one wants to execute a container once and remove any resources attached to it. Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* kill test: clean up warnings; document betterEd Santiago2020-02-26
| | | | | | | | | | | | | | | | | | | 9f69c4eca (part of the f31 pr, #3091) semi-broke the kill test, there's now an ugly warning: setup(): removing stray images quay.io/libpod/fedora-minimal:latest 7bb5a60e8a78 The comments also didn't actually explain the problem being addressed, and included a misleading reference to busybox. Here we switch to using fedora-minimal only with podman-remote, clean it up (rmi) when finished, and include an explanation in the comments about why this is needed; making it clear that this workaround can be removed once we get rid of podman-remote. We also reformat back to 80 columns. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Fix kill test obtaining CIDChris Evich2020-02-25
| | | | | | | | | | It's possible/likely the container image for the test will need to be pulled as part of the `run` command. Due to the way BATS handles output, messages regarding image-pull could be misinterpreted as the container's CID. Force the CID to be obtained by only the last line of output. Signed-off-by: Chris Evich <cevich@redhat.com>
* System Tests: Force default signal handlersChris Evich2020-02-25
| | | | | | | | | | | Recommended as part of: https://github.com/containers/libpod/issues/5004 and https://github.com/containers/crun/issues/230 Signed-off-by: Chris Evich <cevich@redhat.com>
* Friendly amendment: tests, and a help messageEd Santiago2020-02-23
| | | | | | | | | | | 1) Help message for podman port was missing [PORT] 2) Add test for 'podman port'. And, actually, an entire networking test that I'd written some weeks ago but apparently didn't 'git add'. Signed-off-by: Ed Santiago <santiago@redhat.com> Signed-off-by: Brent Baude <bbaude@redhat.com>
* Login test: use --password-stdinEd Santiago2020-02-20
| | | | | | | | | | | | Great timing: this new test collided against #5268, which added a warning about using command-line --password. CI is now going to fail all over. Fix: rework test to use --password-stdin. Am doing so only in the places where output string is checked; other instances can keep using '--password xxx' because it's simpler. Signed-off-by: Ed Santiago <santiago@redhat.com>
* podman images: add --filter=since=XXEd Santiago2020-02-20
| | | | | | | | | | | | | | | | | | | | | | Looks like a bit of a misunderstanding from early on. Docker implements --filter=since=IMAGE. Podman implements 'after' instead of 'since'. Add an equivalent case statement to handle both, keeping 'after' because we have no way of knowing if it is used in the field. Update documentation ... and fix what looks like a complete misinterpretation of what the code actually does: the man page claimed that these were time fields, but I don't see any possible incantation in which a time value works or could work. Updated docs to reflect IMAGE usage. Also changed nonworking '==' to single '='. Added tests. [UPDATE: skip with broken podman-remote] Fixes: #5040 Signed-off-by: Ed Santiago <santiago@redhat.com>
* New login and push testsEd Santiago2020-02-19
| | | | | | | | | | Test podman login/logout, login with wrong credentials, auth file contents, auth file path override, push/pull, and, if skopeo is installed, credentials sharing Fixes: #4283 Signed-off-by: Ed Santiago <santiago@redhat.com>
* add pkg/signalValentin Rothberg2020-02-14
| | | | | | | | | Add pkg/signal to deal with parts of signal processing and translating signals from string to numeric representations. The code has been copied from docker/docker (and attributed with the copyright) but been reduced to only what libpod needs (on Linux). Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #4824 from edsantiago/batsOpenShift Merge Robot2020-01-15
|\ | | | | more BATS tests
| * more BATS testsEd Santiago2020-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - run: --name (includes 'podman container exists' tests) - run: --pull (always, never, missing) - build: new test for ADD URL (#4420) - exec: new test for issue #4785 (pipe getting lost) - diff: new test - selinux (mostly copied from docker-autotest) Plus a bug fix: the wait_for_output() helper would continue checking, eventually timing out, even if the container had already exited (probably because of an error). Fix: as part of the loop, run 'podman inspect' and bail out if container is not running. Include exit code and logs. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Add codespell to validate spelling mistakes in code.Daniel J Walsh2020-01-11
|/ | | | | | Fix all errors found by codespell Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix race condition in kill test leading to hangEd Santiago2019-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When you open a FIFO for reading, but there's no writer, you hang. This is just one of those obscure UNIXisms we all know but just forget all too often. My last PR was guilty of introducing such a condition; I caught it by accident while testing other stuff. In short, the signal container was doing 'echo DONE' as its last step, and we (BATS) were reading the FIFO to check for it; but if the container exited before we opened the FIFO for read, the open would hang. This is not a hang that we can catch in the test: it would hang the entire job forever. CI would presumably time out eventually, but with no useful indication of the cause of the error. Solution: use 'exec' to open the FIFO early and keep it open, and use 'read -u FD' instead of 'read <$fifo': the former reads from an open FD, the latter forces a new open() each time. There is a shorter, more maintainable solution -- see #4755 -- but that suffers from the same hanging problem in the (unlikely) case where the signal-handling container exits, e.g. if signal handling is broken in podman. The test would hang, with no helpful indicator. Although this PR is a little more advanced scripting, I have commented the relevant code well and believe the maintenance cost is worth the risk of undebuggable hangs. There is still a hang risk: if 'podman logs -f' fails and exits immediately, the 'exec' will hang. I can't think of a non-racy way to prevent that, and choose to live with that risk. Tested by temporarily including 9 (SIGKILL) in the signals list. The read timeout triggers, and the end user has a fair chance of tracking down the root cause. Signed-off-by: Ed Santiago <santiago@redhat.com>
* signal parsing - better input validationEd Santiago2019-12-26
| | | | | | | | | | | | | | | | | | | | | | The helper function we use for signal name mapping does not check for negative numbers nor invalid (too-high) ones. This can yield unexpected error messages: # podman kill -s -1 foo ERRO[0000] unknown signal "18446744073709551615" This PR introduces a small wrapper for it that: 1) Strips off a leading dash, allowing '-1' or '-HUP' as valid inputs; and 2) Rejects numbers <1 or >64 (SIGRTMAX) Also adds a test suite checking signal handling as well as ensuring that invalid signals are rejected by the command line. Fixes: #4746 Signed-off-by: Ed Santiago <santiago@redhat.com>
* podman images history test - clean upEd Santiago2019-12-12
| | | | | | | | | | | | | | | As initially written the test does not work other than in a CI environment because it relies on an empty tag history. Rewrite so we can guarantee that, by creating a new image. Also add slightly more helpful tests: the initial tests would just show "expected 0, got 1" which is unhelpful. Tweak so we test on actual history contents, which will show more informative messages on failure. And, finally, clean up after ourselves. Signed-off-by: Ed Santiago <santiago@redhat.com>
* test for #3920 (improper caching of tarballs in build)Ed Santiago2019-12-05
| | | | | | | | | See https://github.com/containers/buildah/pull/1955 I've confirmed that this test fails under podman-1.6.2-2.fc30 and passes under current master. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add support for image name historySascha Grunert2019-11-27
| | | | | | | | We leverage the containers/storage image history tracking feature to show the previously used image names when running: `podman images --history` Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* stats: list all running containers unless specified otherwiseValentin Rothberg2019-10-23
| | | | | | | | | | Unless specified otherwise by --all, --latest or via arguments, list all running containers. This matches the behaviour of Docker and is also illustrated in the man pages where containers and options are marked to be optional. Fixes: #4274 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-20 02:30:34 +0000