summaryrefslogtreecommitdiff
path: root/test
Commit message (Collapse)AuthorAge
* Enable IPv6 port bindingMatthew Heon2020-06-10
| | | | | | | | | | | | | | | | | | | | | | | | Two areas needed tweaking to accomplish this: port parsing and binding ports on the host. Parsing is an obvious problem - we have to accomodate an IPv6 address enclosed by [] as well as a normal IPv4 address. It was slightly complicated by the fact that we previously just counted the number of colons in the whole port definition (a thousand curses on whoever in the IPv6 standard body decided to reuse colons for address separators), but did not end up being that bad. Libpod also (optionally) binds ports on the host to prevent their reuse by host processes. This code was IPv4 only for TCP, and bound to both for UDP (which I'm fairly certain is not correct, and has been adjusted). This just needed protocols adjusted to read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to bind to. Fixes #5715 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6532 from sujil02/python-testOpenShift Merge Robot2020-06-09
|\ | | | | Modify py test to start stop system service for each test
| * Modify py test to start stop system service for each testSujil022020-06-07
| | | | | | | | | | | | | | | | Start stop system service for each test class to make it east to integrate to CI Adds more tests Add some common methods shared between images and containers test. Signed-off-by: Sujil02 <sushah@redhat.com>
* | e2e: disable checkpoint test on UbuntuValentin Rothberg2020-06-08
| | | | | | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Enable Ubuntu tests in CIBrent Baude2020-06-08
|/ | | | | | Add updates required for ubuntu and run integration tests Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #6417 from sujil02/py-testOpenShift Merge Robot2020-06-06
|\ | | | | Adds docker py regression test.
| * Adds docker py regression test.Sujil022020-06-04
| | | | | | | | | | | | | | | | Adds test to validate podman image endpoints. Adds readme on how to run python tests Adds contants file. Signed-off-by: Sujil02 <sushah@redhat.com>
* | Fix handling of systemd.Daniel J Walsh2020-06-05
| | | | | | | | | | | | | | | | | | | | Systemd enablement has to happen on the server side, since we need check if the image is running systemd. Also need to make sure user setting the StopSignal is not overriden on the server side. But if not set and using systemd, we set it correctly. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #6489 from edsantiago/batsOpenShift Merge Robot2020-06-04
|\ \ | | | | | | BATS and APIv2: more tests and tweaks
| * | BATS and APIv2: more tests and tweaksEd Santiago2020-06-03
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - (minor): apiv2 tests: check for full ID Observation made while reviewing #6461: tests were checking only for a 12-character container/image ID in return value. It's actually 64, and we should test for that. This should also minimize confusion in a future maintainer. - podman pause/unpause: new test Runs a 'date/sleep' loop, pauses container, sleeps 3s, restarts, then confirms that there's a 3- to 6-second gap in the logs for the container. - podman healthcheck: new test run a container with healthcheck, test both healthy and unhealthy conditions - podman pod: check '{{.Pod}}' field in podman ps Hey, as long as we have a pod with two running containers, might as well confirm that 'podman ps' returns the expected pod ID. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6485 from QiWang19/remote-ignoreOpenShift Merge Robot2020-06-04
|\ \ | | | | | | fix remote test --ignore & turn on more tests
| * | fix remote test --ignore & turn on more testsQi Wang2020-06-03
| | | | | | | | | | | | | | | | | | fix remote test --ignore & turn on more tests Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | Merge pull request #6481 from QiWang19/rm-test-stopOpenShift Merge Robot2020-06-04
|\ \ \ | | | | | | | | turn on remote stop_test
| * | | turn on remote stop_testQi Wang2020-06-03
| | | | | | | | | | | | | | | | | | | | | | | | turn on stop_test --cidfile Signed-off-by: Qi Wang <qiwan@redhat.com>
* | | | Merge pull request #6470 from mheon/fix_stats_nonetOpenShift Merge Robot2020-06-04
|\ \ \ \ | | | | | | | | | | Properly follow linked namespace container for stats
| * | | | Properly follow linked namespace container for statsMatthew Heon2020-06-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman containers can specify that they get their network namespace from another container. This is automatic in pods, but any container can do it. The problem is that these containers are not guaranteed to have a network namespace of their own; it is perfectly valid to join the network namespace of a --net=host container, and both containers will end up in the host namespace. The code for obtaining network stats did not account for this, and could cause segfaults as a result. Fortunately, the fix is simple - the function we use to get said stats already performs appropriate checks, so we just need to recursively call it. Fixes #5652 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | | | Merge pull request #6482 from mheon/split_inspectOpenShift Merge Robot2020-06-04
|\ \ \ \ \ | |_|_|_|/ |/| | | | Ensure that image/container inspect are specialized
| * | | | Ensure that image/container inspect are specializedMatthew Heon2020-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are currently able to inspect images with `podman container inspect` and containers with `podman image inspect` and neither of those seem correct. This ensures that the appropriate flags, and only the appropriate flags, are available for each specialized exec, and they can only inspect the specific type they were intended to. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | | | Merge pull request #6461 from chuanchang/add_contaner_cases_for_apiv2OpenShift Merge Robot2020-06-03
|\ \ \ \ \ | |_|_|_|/ |/| | | | test.apiv2: add test cases for committing an image from a container
| * | | | test.apiv2: add test cases for committing an image from a containerAlex Jia2020-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing query parameters: container, repo, tag, comment, author, changes and pause. Signed-off-by: Alex Jia <chuanchang.jia@gmail.com>
* | | | | Merge pull request #6465 from rhatdan/remoteOpenShift Merge Robot2020-06-03
|\ \ \ \ \ | |_|/ / / |/| | | | Add more Remote tests
| * | | | Add more Remote testsDaniel J Walsh2020-06-03
| |/ / / | | | | | | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | | Merge pull request #6469 from jwhonce/wip/authOpenShift Merge Robot2020-06-03
|\ \ \ \ | | | | | | | | | | V2 Add support for ssh authentication methods
| * | | | V2 Add support for ssh authentication methodsJhon Honce2020-06-03
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * podman --remote ssh://<user>:<password>@<host>:<port><path> * podman --remote ssh://<user>:<password>@<host>:<port><path> \ --identity <path> --passphrase <phrase> * ssh-add <key> podman --remote ssh://<user>@<host><path> * Fix `podman help` to run even if podman missing components * Prompt for passphrase on stdin IFF key is protected and passphrase not given via any other configuration * cobra flags do not support optional value flags therefore refactored --remote to be a boolean and --url will now contain the URI to Podman service Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | | | Merge pull request #6473 from mheon/fix_inspect_segfaultOpenShift Merge Robot2020-06-03
|\ \ \ \ | |/ / / |/| | | Fix a segfault in `podman inspect -l` w/ no containers
| * | | Fix a segfault in `podman inspect -l` w/ no containersMatthew Heon2020-06-02
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | We also need to rework container/image inspect to be separate, but that can happen in another PR. Fixes #6472 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | Turn on remote rm_test --cidfileQi Wang2020-06-02
| |/ |/| | | | | | | | | Turn on remote rm_test --cidfile Signed-off-by: Qi Wang <qiwan@redhat.com>
* | Enable detached exec for remoteMatthew Heon2020-06-02
|/ | | | | | | | | | | | | | | | | | | | | | | The biggest obstacle here was cleanup - we needed a way to remove detached exec sessions after they exited, but there's no way to tell if an exec session will be attached or detached when it's created, and that's when we must add the exit command that would do the removal. The solution was adding a delay to the exit command (5 minutes), which gives sufficient time for attached exec sessions to retrieve the exit code of the session after it exits, but still guarantees that they will be removed, even for detached sessions. This requires Conmon 2.0.17, which has the new `--exit-delay` flag. As part of the exit command rework, we can drop the hack we were using to clean up exec sessions (remove them as part of inspect). This is a lot cleaner, and I'm a lot happier about it. Otherwise, this is just plumbing - we need a bindings call for detached exec, and that needed to be added to the tunnel mode backend for entities. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6411 from mheon/exec_bindingsOpenShift Merge Robot2020-06-02
|\ | | | | Add bindings for exec and enable attached remote exec
| * Add bindings for exec and enable attached remoteMatthew Heon2020-06-01
| | | | | | | | | | | | | | | | | | | | | | This adds bindings for starting exec sessions, and then uses them to wire up detached exec. Code is heavily based on Attach code for containers, slightly modified to handle exec sessions. Bindings are presently attached-only, detached is pending on a Conmon update landing in CI. I'll probably get to that next. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #6456 from edsantiago/batsOpenShift Merge Robot2020-06-01
|\ \ | | | | | | system tests : more tests
| * | system tests : more testsEd Santiago2020-06-01
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | - exec: add test for #5046, in which conmon swallowed chars on a large byte transfer - pod: add 'pod exists' tests, both positive and negative; consolidate tests; add '--label', and check in 'pod inspect' add 'pod ps' tests - networking: add test for #5466, in which detached run with --userns=keep-id would not forward a port Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6454 from rhatdan/remoteOpenShift Merge Robot2020-06-01
|\ \ | |/ |/| Remove skipifremote checks in images_test.go
| * turn on remote testing for images. podman-remote build now works.Daniel J Walsh2020-06-01
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Add support for format {{.Label}}Brent Baude2020-06-01
|/ | | | | | | | the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented. Fixes #6448 Signed-off-by: Brent Baude <bbaude@redhat.com>
* Fix leak of empty tarballBrent Baude2020-06-01
| | | | | | | | In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format. Fixes: #6409 Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #6353 from lsm5/build-without-varlinkOpenShift Merge Robot2020-06-01
|\ | | | | enable building without `varlink` tag
| * default build without `varlink` tagLokesh Mandvekar2020-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | Issue gh#6286 was already fixed in a prior commit but the Makefile still ran some varlink steps by default. This commit makes any varlink build steps dependent on the varlink build tag and also makes the contrib rpm spec file independent of varlink. Endpoint tests will be run only if BUILDTAGS contains varlink. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* | Merge pull request #5594 from edsantiago/batsOpenShift Merge Robot2020-05-30
|\ \ | |/ |/| system tests: enable skopeo REGISTRY_AUTH_FILE
| * system tests: enable skopeo REGISTRY_AUTH_FILEEd Santiago2020-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | skopeo pr #829 adds REGISTRY_AUTH_FILE support; this lets us enable the following test: podman login - shares credentials with skopeo - via envariable (I seriously doubt that the CI VMs have been updated with the new skopeo, but I can leave this PR in limbo until that happens. Otherwise I'll forget to enable the test). Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6380 from mheon/fix_mount_readonlyOpenShift Merge Robot2020-05-29
|\ \ | | | | | | Add support for `readonly` option to --mount
| * | Add support for `readonly` option to --mountMatthew Heon2020-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is just an alias to the `ro` option, but it's already in the manpages (and Docker) so we might as well add support for it. Fixes #6379 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | V2 verify JSON output is consistent and doesn't driftJhon Honce2020-05-28
| | | | | | | | | | | | | | | | | | | | | $ cd test/apiv2 $ python -m unittest -v test_rest_v1_0_0.TestApi Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | | Merge pull request #6416 from vrothberg/fix-ps-lastOpenShift Merge Robot2020-05-28
|\ \ \ | | | | | | | | fix `ps --last=N`
| * | | fix `ps --last=N`Valentin Rothberg2020-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix `ps --last=N` to also include non-running containers. Also add an e2e test to prevent us from regressing in the future. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | | test.apiv2: add testing for image and deal with API returning binaryAlex Jia2020-05-28
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add testing for displaying image history and exporting image Deal with API returning binary (Content-Type =~ 'octet'). When so, set $output to the output of 'file'. Bug fix: in 't' helper, declare loop var $i as local to avoid contaminating caller Signed-off-by: Ed Santiago <santiago@redhat.com> Signed-off-by: Alex Jia <chuanchang.jia@gmail.com>
* | | Add streaming ability to endpointBrent Baude2020-05-27
| | | | | | | | | | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* | | Merge pull request #6372 from boaz0/gh_6283OpenShift Merge Robot2020-05-27
|\ \ \ | | | | | | | | Add --format to pod inspect
| * | | Add --format to pod inspectBoaz Shuster2020-05-27
| |/ / | | | | | | | | | Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | | Merge pull request #6363 from jwhonce/wip/attachOpenShift Merge Robot2020-05-26
|\ \ \ | |/ / |/| | V2 Fix interface nil checks
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 13:29:17 +0000