summaryrefslogtreecommitdiff
path: root/test
Commit message (Collapse)AuthorAge
* Correct exit code 126 and 127baude2018-02-21
| | | | | | | | | | | | | | | | The exit codes for 126 and 127 were reversed. For the record, the exit codes used are as follows: * 125 if ‘chroot’ itself fails * 126 if COMMAND is found but cannot be invoked * 127 if COMMAND cannot be found This resolves issue #367 Signed-off-by: baude <bbaude@redhat.com> Closes: #378 Approved by: baude
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Performance enhancement for podman imagesbaude2018-02-20
| | | | | | | | | | | | | Previous code was using slow routines to collect some of the information needed to output images. Specifically size was being calculated instead of using the cached, already known size already available. Also, straight- lined several of the code paths. Overall assessment is that these improvements cut the time for images in half. Signed-off-by: baude <bbaude@redhat.com> Closes: #365 Approved by: mheon
* Run podman inside a podman containerbaude2018-02-16
| | | | | | | | | | | | | | | | | We should be able to run nested podman containers in particular for our testing environment. i.e. eat our own dog food. Some privileges had to be corrected in order for this to work correctly. Added a third papr target that runs podman tests inside podman. I marked the test as not required right now as we get more confident in the results Signed-off-by: baude <bbaude@redhat.com> Closes: #340 Approved by: rhatdan
* Return imageid from podman pullbaude2018-02-15
| | | | | | | | | | | | When using podman to pull an image, print the image id after the image is pulled. Resolves issue #329 Signed-off-by: baude <bbaude@redhat.com> Closes: #342 Approved by: rhatdan
* No entrpoint, cmd, or commandbaude2018-02-15
| | | | | | | | | | | | | When an image does not have an ENTRYPOINT nor a CMD and the user does not provide a command in the CLI, we should fail gracefully. This resolves issue #328 Signed-off-by: baude <bbaude@redhat.com> Closes: #333 Approved by: mheon
* Privileged containers should inherit host devicesbaude2018-02-15
| | | | | | | | | | When running a privileged container, it should inherit the same devices the host has. Signed-off-by: baude <bbaude@redhat.com> Closes: #330 Approved by: mheon
* Change json to match docker inspectDaniel J Walsh2018-02-11
| | | | | | | | | | Changing these fields caused the output of podman inspect to more closely match docker inspect. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #306 Approved by: mheon
* Honor ENTRYPOINT in imagebaude2018-02-11
| | | | | | | | | | | | | When an image has an ENTRYPOINT defined, we should be honoring it. The problem is described in issue #321. Also, added buildah binary to test runtimes for testing entrypoint and will also allow us to test podman build as well. Signed-off-by: baude <bbaude@redhat.com> Closes: #322 Approved by: rhatdan
* Rework port codebaude2018-02-09
| | | | | | | | | | | Rework port code for generalized clean up and to address issue #269 where additional portbindings between host and containers we being introduced by error. Signed-off-by: baude <bbaude@redhat.com> Closes: #308 Approved by: mheon
* podman logs: fix tailingbaude2018-02-09
| | | | | | | | | | | Fix issues with tailing of container logs as described in issue #16. Also add in the ability to use a duration or known time stamp formats for the --since flag. Signed-off-by: baude <bbaude@redhat.com> Closes: #317 Approved by: mheon
* Update pause tests per QE suggestions and move to gingkoTomSweeneyRedHat2018-02-08
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #285 Approved by: mheon
* Final ginkgo migrationbaude2018-02-08
| | | | | | | | | | | | | | | Completion of the migration from bats to ginkgo. This includes: * load * mount * pause * port * run_networking * search Note: build will be done within a different PR Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #290 from umohnani8/templatesDaniel J Walsh2018-02-07
|\ | | | | Fix when the --format flag prints a new line at the end
| * Fix when the --format flag prints a new line at the endumohnani82018-02-07
| | | | | | | | | | | | | | | | | | | | | | If the output is to a terminal, return a new line at the end of the output so that the output is visually appealing. If the output is being piped, or saved to a file, basically not being outputted to a terminal, do not print a new line at the end of the output. This ensures any further data manipulation with the results happens smoothly without requiring to remember the '/n' at the end of the output. Signed-off-by: umohnani8 <umohnani@redhat.com>
* | Merge pull request #300 from baude/ginkgo_versionDaniel J Walsh2018-02-07
|\ \ | |/ |/| More ginkgo migration
| * More ginkgo migrationbaude2018-02-07
| | | | | | | | | | | | | | | | | | | | | | * attach * run_exit * save * tag * version * run_privileged -> privileged Signed-off-by: baude <bbaude@redhat.com>
* | Match podman inspect output to docker inspectumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | Made a change to make sure that the output paths of podman inspect matches that of docker inspect. For example to get the stop signal you should be able to do podman inspect ctr --format {{.Config.StopSignal}} and the same thing in docker will give the same results. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #292 Approved by: rhatdan
* | Add podman search commandumohnani82018-02-06
|/ | | | | | | | | | | | | podman search queries a registry for a matching image and prints the output. I added a new flag called "registry" giving the user the option to search a specific registry if they don't want to search all their default registries. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #241 Approved by: rhatdan
* Migrate more tests to ginkgobaude2018-02-06
| | | | | | | | | | | | | | | Migrate the following to the ginkgo integration tests: * images * import * inspect * logs * run_dns Signed-off-by: baude <bbaude@redhat.com> Closes: #295 Approved by: mheon
* sysfs should be mounted rw for privilegedbaude2018-02-06
| | | | | | | | | sysfs should be mounted rw for a privileged container. Signed-off-by: baude <bbaude@redhat.com> Closes: #279 Approved by: rhatdan
* Migrate diff, exec, export, and history to ginkgobaude2018-02-05
| | | | | | | | | | Migrate the diff, exec, export, and history bats tests to the ginkgo test suite. Signed-off-by: baude <bbaude@redhat.com> Closes: #287 Approved by: baude
* Deprecate --format for podman topbaude2018-02-05
| | | | | | | | | | | | | | | | | | | Issue #169 describes a common failure when running podman top where if the commands inside the container container a space in them, podman will panic. This was occuring because we take the output from ps and attempt to format it nicely for output and things like JSON. Given that this cannot be predicted or dealt with programatically, the decision was made to deprecate the format switch and simply output what ps provides us. Migrated top integration tests to ginkgo. Resolves Issue: https://github.com/projectatomic/libpod/issues/169 Signed-off-by: baude <bbaude@redhat.com> Closes: #291 Approved by: rhatdan
* Pass NOTIFY_SOCKET and LISTEN_FDS env to OCI RUntime if setDaniel J Walsh2018-02-05
| | | | | | | | | | | | | | In order to have sd_notify from systemd to work in containers we need to pass down the NOTIFY_SOCKET environment variable to the container. LISTEN_FDS, tells the application inside of the container to use socket activation and grab the FDS that are leaked into the container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #271 Approved by: umohnani8
* Allow users to specify logpathDaniel J Walsh2018-02-03
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #135 Approved by: mheon
* Migrate Create|Commit to ginkgobaude2018-02-02
| | | | | | | | | | | | Migrate create and commit bats tests to the ginkgo test suite. In doing so, some structures had to be moved to pkg/podmanstructs/podmanstructs.go so we could do better verification of test results. Signed-off-by: baude <bbaude@redhat.com> Closes: #286 Approved by: rhatdan
* Migrate kill tests to ginkgobaude2018-02-01
| | | | | | | | | | Migrate kill tests to the ginkgo suite and remove the podman_kill bats. Signed-off-by: baude <bbaude@redhat.com> Closes: #281 Approved by: baude
* Implment network == nonebaude2018-01-31
| | | | | | | | | | When network == none, the container should only have a loopback interface and that's it. Signed-off-by: baude <bbaude@redhat.com> Closes: #176 Approved by: baude
* Ginkgo Tests: ps, pull, push and rmbaude2018-01-31
| | | | | | | | | | | | | Migrate ps, pull, push, and rm from bats to ginkgo. Also, fixed a conditional issue with adding ports when an image defines the port and the user wants to override it. Signed-off-by: baude <bbaude@redhat.com> Closes: #277 Approved by: baude
* Migrate start, stats, stop to Ginkgobaude2018-01-30
| | | | | | | | | | Migrate the start, stats, and stop integration tests to the Ginkgo style. Signed-off-by: baude <bbaude@redhat.com> Closes: #274 Approved by: mheon
* Initial gingko workbaude2018-01-29
| | | | | | | | | | | | | | | | | This implements the ginkgo integration test framework for podman. As tests are migrated from bats to ginkgo, we will still run both integration suites. When a test is migrated, we remove the tests from bats at that time. All new tests should be just for the ginkgo framework. One exception is that we only run the ginkgo suit in the travis/ubuntu environment. The CentOS and Fedora PAPR nodes will more than cover those. Signed-off-by: baude <bbaude@redhat.com> Closes: #261 Approved by: baude
* Remove conmon, get package from CRI-ODaniel J Walsh2018-01-27
| | | | | | | | | | | | conmon should not be built in two different places. conmon is now a separate package in Fedora so we can just add requires, for use on Ubuntu we can just require cri-o to be installed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #151 Approved by: mheon
* Add results check and debug output in podman_stopYiqiao Pu2018-01-26
| | | | | | | | | | | Add results check to make sure the container is not shows up after it is stopped. And also add some debug lines to help to figure out which step has problem if case failed. Signed-off-by: Yiqiao Pu <ypu@redhat.com> Closes: #264 Approved by: rhatdan
* Save --privileged stateDaniel J Walsh2018-01-25
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #255 Approved by: mheon
* Fix issue with order of flagsumohnani82018-01-25
| | | | | | | | | | The order of the flags was casuing issue. Enabled SkipArgReorder to fix the problem. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #259 Approved by: rhatdan
* Merge pull request #252 from baude/portDaniel J Walsh2018-01-24
|\ | | | | podman port
| * podman portbaude2018-01-23
| | | | | | | | | | | | | | | | | | | | | | podman port reports the port mappings per container. it can be used to report the ports ofa single container or latest container or all containers. in the case of a single container, the user can add an option filter for port and protocol. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #224 from ypu/import_testDaniel J Walsh2018-01-23
|\ \ | |/ |/| Update podman_import test to use podman
| * Update podman_import test to use podmanYiqiao Pu2018-01-23
| | | | | | | | | | | | | | Update the podman_import test to use podman run, and update the check method for string check method. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* | Expose ports from imagebaude2018-01-22
| | | | | | | | | | | | | | | | | | | | | | | | When an image has a port to expose, we need to expose it. User's input overrides the image's port information. Also, enable port information in ps so we can see which random port is assigned. Signed-off-by: baude <bbaude@redhat.com> Closes: #249 Approved by: rhatdan
* | Override hostname for containerbaude2018-01-21
| | | | | | | | | | | | | | | | | | | | | | Adds the ability to override the container's hostname. Also, uses the first twelve characters of the container ID as the default hostname if none is provided. Signed-off-by: baude <bbaude@redhat.com> Closes: #248 Approved by: baude
* | Enable port bindingsbaude2018-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | Set up nbetworking ports for the following use cases: * bind the same port between host and container * bind a specific host port to a different container port * bind a random host port to a specific container port Signed-off-by: baude <bbaude@redhat.com> Closes: #214 Approved by: baude
* | Add dns testsbaude2018-01-19
| | | | | | | | | | | | | | | | | | | | In the dns commit, tests were accidently omitted due to a rebase against master. Signed-off-by: baude <bbaude@redhat.com> Closes: #245 Approved by: baude
* | Fix test syntaxbaude2018-01-18
| | | | | | | | | | | | | | | | | | | | Remove the use of bash -c unless it involves a bash pipe. Also, use run test_runner.sh inside script so that centos can be happy. Signed-off-by: baude <bbaude@redhat.com> Closes: #239 Approved by: baude
* | test/podman_networking.bats: kpod to podmanbaude2018-01-17
| | | | | | | | | | | | | | | | | | this test was still referring to KPOD_BINARY and not podman Signed-off-by: baude <bbaude@redhat.com> Closes: #235 Approved by: baude
* | Implement and test the following flags for podman run and createumohnani82018-01-15
|/ | | | | | | | | | | memory, memory-reservation, memory-swap, memory-swappiness, kernel-memory, cpu-period, cou-quota, cpu-shares, cpus, cpuset-cpus, cpuset-mems, blkio-weight, blkio-weight-device, sysctl, and ulimit Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #221 Approved by: mheon
* podman run container id to filebaude2018-01-11
| | | | | | | | | | podman run --cidfile /tmp/foo writes the container's id to a file. Signed-off-by: baude <bbaude@redhat.com> Closes: #205 Approved by: rhatdan
* Add latest to waitbaude2018-01-08
| | | | | | | | | | | | It is desirable to have a --latest switch on the podman wait command so we can wait on the latest container created to end. Also, fixes a panic with latest where no containers are available. Signed-off-by: baude <bbaude@redhat.com> Closes: #201 Approved by: baude
* Shortname deletion continuedbaude2018-01-08
| | | | | | | | | | | With certain short name usages, rmi still was unable to delete certain images. This was also reflected in several commit tests that were temporarily disabled. Signed-off-by: baude <bbaude@redhat.com> Closes: #200 Approved by: rhatdan
* Shortcut for most recent containerbaude2018-01-08
| | | | | | | | | | | | It is desirable to have a shortcut for the most recently created container. We can now use "**latest" to represent the most recent container instead of its container ID or name. For example: Signed-off-by: baude <bbaude@redhat.com> Closes: #179 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-26 23:24:24 +0000