aboutsummaryrefslogtreecommitdiff
path: root/test
Commit message (Collapse)AuthorAge
* Merge pull request #6978 from edsantiago/apiv2_flake_fixOpenShift Merge Robot2020-07-15
|\ | | | | APIv2 tests: fix race condition causing CI flake
| * APIv2 tests: fix race condition causing CI flakeEd Santiago2020-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A newly-added test in #6835 was flaking in CI with: not ok 143 [20-containers] DELETE libpod/containers/SHA 500 cannot remove container <sha> as it is running - running or paused containers cannot be removed without force: container state improper Root cause: DELETE being run immediately after container start. Although the container is short-lived, it does take time to run and exit. Solution: wait for container to exit (should be quick) before deleting. This gives us a new test for the /wait endpoint. Also: tweaked some comments for readability, removed unnecessary container ps, added actual container status checks, and added actual message checks to another test that was merely checking exit status. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6956 from mheon/add_ports_to_pod_inspectOpenShift Merge Robot2020-07-15
|\ \ | |/ |/| Include infra container information in `pod inspect`
| * Fix lintMatthew Heon2020-07-14
| | | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
| * Include infra container information in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | | | | | | | | | | | We had a field for this in the inspect data, but it was never being populated. Because of this, `podman pod inspect` stopped showing port bindings (and other infra container settings). Add code to populate the infra container inspect data, and add a test to ensure we don't regress again. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Merge pull request #6939 from rhatdan/entrypointOpenShift Merge Robot2020-07-14
|\ \ | | | | | | Fix handling of entrypoint
| * | Fix handling of entrypointDaniel J Walsh2020-07-14
| |/ | | | | | | | | | | | | If a user specifies an entrypoint of "" then we should not use the images entrypoint. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* / Add SystemdMode to inspect for containersMatthew Heon2020-07-14
|/ | | | | | | | | This allows us to determine if the container auto-detected that systemd was in use, and correctly activated systemd integration. Use this to wire up some integration tests to verify that systemd integration is working properly. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6952 from baude/systemdpid1fixOpenShift Merge Robot2020-07-14
|\ | | | | add systemd to fedora image
| * Fix systemd pid 1 testBrent Baude2020-07-13
| | | | | | | | | | | | | | | | | | | | fedora removed the systemd package from its standard container image causing our systemd pid1 test to fail. Replacing usage of fedora to ubi-init. adding ubi images to the cache for local tests. also, remove installation of test/policy.json to the system wide /etc/containers Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #6842 from rhatdan/pids-limitOpenShift Merge Robot2020-07-13
|\ \ | |/ |/| Pids-limit should only be set if the user set it
| * Pids-limit should only be set if the user set itDaniel J Walsh2020-07-10
| | | | | | | | | | | | | | | | | | | | Currently we are sending over pids-limits from the user even if they never modified the defaults. The pids limit should be set at the server side unless modified by the user. This issue has led to failures on systems that were running with cgroups V1. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #6896 from mheon/fix_remote_createcommandOpenShift Merge Robot2020-07-13
|\ \ | | | | | | Fix container and pod create commands for remote create
| * | Fix container and pod create commands for remote createMatthew Heon2020-07-10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In `podman inspect` output for containers and pods, we include the command that was used to create the container. This is also used by `podman generate systemd --new` to generate unit files. With remote podman, the generated create commands were incorrect since we sourced directly from os.Args on the server side, which was guaranteed to be `podman system service` (or some variant thereof). The solution is to pass the command along in the Specgen or PodSpecgen, where we can source it from the client's os.Args. This will still be VERY iffy for mixed local/remote use (doing a `podman --remote run ...` on a remote client then a `podman generate systemd --new` on the server on the same container will not work, because the `--remote` flag will slip in) but at the very least the output of `podman inspect` will be correct. We can look into properly handling `--remote` (parsing it out would be a little iffy) in a future PR. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #6936 from mheon/matt_cant_countOpenShift Merge Robot2020-07-11
|\ \ | | | | | | Correctly print STDOUT on non-terminal remote exec
| * | Correctly print STDOUT on non-terminal remote execMatthew Heon2020-07-10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | I confused STDIN and STDOUT's file descriptors (it's 0 and 1, I thought they were 1 and 0). As such, we were looking at whether we wanted to print STDIN when we looked to print STDOUT. This bool was set when `-i` was set in at the `podman exec` command line, which masked the problem when it was set. Fixes #6890 Fixes #6891 Fixes #6892 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* / version/info: format: allow more json variantsValentin Rothberg2020-07-10
|/ | | | | | | | | Allow more variants to yield json output for `podman version` and `podman info`. Instead of comparing strings, use a regex and add unit and e2e tests. Fixes: #6927 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #6906 from rhatdan/VENDOROpenShift Merge Robot2020-07-09
|\ | | | | Vendor in new version of Buildah
| * Vendor in new version of BuildahDaniel J Walsh2020-07-09
| | | | | | | | | | | | This also pulls in latest runc and containers/common Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #6835 from zhangguanzhang/masterOpenShift Merge Robot2020-07-09
|\ \ | | | | | | fix API: Create container with an invalid configuration
| * | fix API: Create container with an invalid configurationzhangguanzhang2020-07-09
| |/ | | | | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* / logs: enable e2e testsValentin Rothberg2020-07-09
|/ | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #6829 from rhatdan/keepidOpenShift Merge Robot2020-07-07
|\ | | | | Add username to /etc/passwd inside of container if --userns keep-id
| * Add username to /etc/passwd inside of container if --userns keep-idDaniel J Walsh2020-07-07
| | | | | | | | | | | | | | | | | | | | If I enter a continer with --userns keep-id, my UID will be present inside of the container, but most likely my user will not be defined. This patch will take information about the user and stick it into the container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Add support for Filter query parameter to list images apiKorhonen Sami (Samlink)2020-07-07
|/ | | | | | | | | | | | Docker api version 1.24 uses a query parameter named Filter for filtering images by names. In more recent versions of api name filter is in filters query parameter with other filters This patch adds a mapping that translates Filter query parameter to Filters={"reference": [""]} Signed-off-by: Sami Korhonen <skorhone@gmail.com>
* Merge pull request #6693 from goochjj/libpod-sd-notify-cmdlineOpenShift Merge Robot2020-07-06
|\ | | | | Implement --sdnotify cmdline option to control sd-notify behavior
| * BATS system tests for new sdnotifyEd Santiago2020-07-06
| | | | | | | | Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6570 from rhatdan/remoteOpenShift Merge Robot2020-07-06
|\ \ | | | | | | Change buildtag for remoteclient to remote for testing
| * | Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | | | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Merge pull request #6868 from mheon/fix_mount_rootlessOpenShift Merge Robot2020-07-06
|\ \ \ | |/ / |/| | Fix bug where `podman mount` didn't error as rootless
| * | Disable mount tests as rootlessMatthew Heon2020-07-06
| | | | | | | | | | | | | | | | | | | | | | | | As rootless, `podman mount` must be run inside `podman unshare`. We don't really have a testing harness that can do this right now. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | Merge pull request #6812 from chuanchang/add_apiv2_testOpenShift Merge Robot2020-07-06
|\ \ \ | |_|/ |/| | test.apiv2: add testing for container initializing
| * | test.apiv2: add testing for container initializingAlex Jia2020-07-01
| | | | | | | | | | | | Signed-off-by: Alex Jia <chuanchang.jia@gmail.com>
* | | Merge pull request #6836 from ashley-cui/tzlibpodOpenShift Merge Robot2020-07-06
|\ \ \ | |_|/ |/| | Add --tz flag to create, run
| * | Add --tz flag to create, runAshley Cui2020-07-02
| |/ | | | | | | | | | | | | --tz flag sets timezone inside container Can be set to IANA timezone as well as `local` to match host machine Signed-off-by: Ashley Cui <acui@redhat.com>
* | Merge pull request #6864 from vrothberg/v2-moduleOpenShift Merge Robot2020-07-06
|\ \ | | | | | | move go module to v2
| * | move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | podman ps truncate the commandPaul Holzinger2020-07-05
|/ / | | | | | | | | | | | | | | | | With a long create command the output from ps is basically unreadable. This is a regression that was introduced with Podman 2.0. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* / stop podman service in e2e testsBrent Baude2020-07-02
|/ | | | | | when running e2e tests, each test knows to stop its service when running remote; however, during setup and teardown remote services were not being killed when we were done with them. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #6826 from edsantiago/test_apiv2OpenShift Merge Robot2020-06-30
|\ | | | | APIv2 tests: usability: better test logging
| * APIv2 tests: usability: better test loggingEd Santiago2020-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test-apiv2 has two basic comparisons of returned JSON: equality and likeness ('=' and '~'). When logging failures, the test runner shows both actual and expected values. When logging success, for '=' there's no need to show both actual and expected. But for '~', it can be helpful (for verifying test correctness) to show the actual returned value. To be specific: old: ok ... .MemTotal~[0-9]\+ new: ok ... .MemTotal ('33509068800') ~ [0-9]\+ old: ok ... .[0].State~\(exited\|stopped\) new: ok ... .[0].State ('exited') ~ \(exited\|stopped\) The main benefit is that a developer or end user can easily see precisely what was returned; this can help confirm that the test is working as intended, and/or help fine-tune how the test is written. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Merge pull request #6747 from giuseppe/fix-user-volumesOpenShift Merge Robot2020-06-30
|\ \ | |/ |/| container: move volume chown after spec generation
| * test: add tests for --user and volumesValentin Rothberg2020-06-29
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | Merge pull request #6808 from mheon/allow_empty_hostportOpenShift Merge Robot2020-06-29
|\ \ | | | | | | Allow empty host port in --publish flag
| * | Allow empty host port in --publish flagMatthew Heon2020-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I didn't believe that this was actually legal, but it looks like it is. And, unlike our previous understanding (host port being empty means just use container port), empty host port actually carries the same meaning as `--expose` + `--publish-all` (that is, assign a random host port to the given container port). This requires a significant rework of our port handling code to handle this new case. I don't foresee this being commonly used, so I optimized having a fixed port number as fast path, which this random assignment code running after the main port handling code only if necessary. Fixes #6806 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | | Merge pull request #6810 from vrothberg/auto-update-testOpenShift Merge Robot2020-06-29
|\ \ \ | | | | | | | | systemd system test: run auto-update
| * | | systemd system test: run auto-updateValentin Rothberg2020-06-29
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run `podman auto-update` in the systemd system tests. Note that this is a first step to at least exercise parts of `auto-update` in the CI. The service won't get updated just yet as we need to set up a local registry, and push a new image. I do not have enough time at the moment to do that but consider this change already as an improvement. We are experiencing some issues in #6793 w.r.t. to auto-updates but couldn't track down the root cause yet. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | | Merge pull request #6783 from edsantiago/batsOpenShift Merge Robot2020-06-29
|\ \ \ | |/ / |/| | system tests: add pod, inspect testing
| * | system tests: add pod, inspect testingEd Santiago2020-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Followup to #6761: confirm that 'podman ps' shows the ports on a running container in a pod created with -p (not to be confused with the container itself running with -p, tested in 500-networking.bats). While we're at it, test that the port handling itself works, by sending random text to the container and making sure the container receives it. Followup to #6752: 'podman inspect' should show multiple security opts Signed-off-by: Ed Santiago <santiago@redhat.com>
* | | Merge pull request #6767 from vrothberg/sec-opt-testOpenShift Merge Robot2020-06-26
|\ \ \ | | | | | | | | e2e inspect: HostConfig.SecurityOpt
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 05:48:22 +0000