From 16c09f847bf6f40e854e5718f78e2d86deb9c624 Mon Sep 17 00:00:00 2001 From: Micah Abbott Date: Wed, 6 Jun 2018 10:55:35 -0400 Subject: podman-run: clean up some formatting issues Signed-off-by: Micah Abbott Closes: #911 Approved by: rhatdan --- docs/podman-run.1.md | 162 ++++++++++++++++++++++++++++----------------------- 1 file changed, 90 insertions(+), 72 deletions(-) diff --git a/docs/podman-run.1.md b/docs/podman-run.1.md index ed6589f26..7b4abeade 100644 --- a/docs/podman-run.1.md +++ b/docs/podman-run.1.md @@ -71,9 +71,9 @@ each of stdin, stdout, and stderr. Write the pid of the `conmon` process to a file. `conmon` daemonizes separate from Podman, so this is necessary when using systemd to restart Podman containers. **--cpu-period**=*0* - Limit the CPU CFS (Completely Fair Scheduler) period + Limit the CPU CFS (Completely Fair Scheduler) period - Limit the container's CPU usage. This flag tell the kernel to restrict the container's CPU usage to the period you specify. + Limit the container's CPU usage. This flag tell the kernel to restrict the container's CPU usage to the period you specify. **--cpu-quota**=*0* Limit the CPU CFS (Completely Fair Scheduler) quota @@ -193,6 +193,7 @@ is the case the **--dns** flags is necessary for every run. Overwrite the default ENTRYPOINT of the image This option allows you to overwrite the default entrypoint of the image. + The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to run when the container starts, but it is (purposely) more difficult to override. The ENTRYPOINT gives a container its @@ -234,12 +235,15 @@ inside of the container. Print usage statement **--image-volume**, **builtin-volume**=*bind*|*tmpfs*|*ignore* - Tells podman how to handle the builtin image volumes. The options are: 'bind', 'tmpfs', or 'ignore' (default 'bind') - bind: A directory is created inside the container state directory and bind mounted into - the container for the volumes. - tmpfs: The volume is mounted onto the container as a tmpfs, which allows the users to create - content that disappears when the container is stopped. - ignore: All volumes are just ignored and no action is taken. + Tells podman how to handle the builtin image volumes. + + The options are: `bind`, `tmpfs`, or `ignore` (default `bind`) + + - `bind`: A directory is created inside the container state directory and bind mounted into + the container for the volumes. + - `tmpfs`: The volume is mounted onto the container as a tmpfs, which allows the users to create + content that disappears when the container is stopped. + - `ignore`: All volumes are just ignored and no action is taken. **-i**, **--interactive**=*true*|*false* Keep STDIN open even if not attached. The default is *false*. @@ -254,8 +258,9 @@ inside of the container. **--ipc**="" Default is to create a private IPC namespace (POSIX SysV IPC) for the container - 'container:': reuses another container shared memory, semaphores and message queues - 'host': use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure. + + - `container:`: reuses another container shared memory, semaphores and message queues + - `host`: use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure. **--kernel-memory**="" Kernel memory limit (format: `[]`, where unit = b, k, m or g) @@ -276,17 +281,18 @@ millions of trillions. Not implemented **--log-driver**="*json-file*" - Logging driver for the container. Default is defined by daemon `--log-driver` flag. - **Warning**: the `podman logs` command works only for the `json-file` and + Logging driver for the container. Default is defined by daemon `--log-driver` flag. + + **Warning**: the `podman logs` command works only for the `json-file` and `journald` logging drivers. **--log-opt**=[] - Logging driver specific options. + Logging driver specific options. - "path=/var/log/container/mycontainer.json" : Set the path to the container log file. + `path=/var/log/container/mycontainer.json`: Set the path to the container log file. **--mac-address**="" - Container MAC address (e.g. 92:d0:c6:0a:29:33) + Container MAC address (e.g. `92:d0:c6:0a:29:33`) Remember that the MAC address in an Ethernet network must be unique. The IPv6 link-local address will be based on the device's MAC address @@ -327,9 +333,9 @@ unit, `b` is used. Set LIMIT to `-1` to enable unlimited swap. Assign a name to the container The operator can identify a container in three ways: - UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”) - UUID short identifier (“f78375b1c487”) - Name (“jonah”) + - UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”) + - UUID short identifier (“f78375b1c487”) + - Name (“jonah”) podman generates a UUID for each container, and if a name is not assigned to the container with **--name** then the daemon will also generate a random @@ -337,12 +343,12 @@ string name. The name is useful any place you need to identify a container. This works for both background and foreground containers. **--network**="*bridge*" - Set the Network mode for the container - 'bridge': create a network stack on the default bridge - 'none': no networking - 'container:': reuse another container's network stack - 'host': use the podman host network stack. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure. - '|': connect to a user-defined network + Set the Network mode for the container: + - `bridge`: create a network stack on the default bridge + - `none`: no networking + - `container:`: reuse another container's network stack + - `host`: use the podman host network stack. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure. + - `|`: connect to a user-defined network **--network-alias**=[] Not implemented @@ -355,9 +361,11 @@ This works for both background and foreground containers. **--pid**="" Set the PID mode for the container + Default is to create a private PID namespace for the container - 'container:': join another container's PID namespace - 'host': use the host's PID namespace for the container. Note: the host mode gives the container full access to local PID and is therefore considered insecure. + + - `container:`: join another container's PID namespace + - `host`: use the host's PID namespace for the container. Note: the host mode gives the container full access to local PID and is therefore considered insecure. **--pids-limit**="" Tune the container's pids limit. Set `-1` to have unlimited pids for the container. @@ -368,10 +376,10 @@ This works for both background and foreground containers. **--privileged**=*true*|*false* Give extended privileges to this container. The default is *false*. - By default, podman containers are -“unprivileged” (=false) and cannot, for example, modify parts of the kernel. -This is because by default a container is not allowed to access any devices. -A “privileged” container is given access to all devices. + By default, podman containers are “unprivileged” (=false) and cannot, +for example, modify parts of the kernel. This is because by default a +container is not allowed to access any devices. A “privileged” container +is given access to all devices. When the operator executes **podman run --privileged**, podman enables access to all devices on the host as well as set turn off most of the security measures @@ -381,12 +389,16 @@ protecting the host from the container. Publish a container's port, or range of ports, to the host Format: `ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort | containerPort` -Both hostPort and containerPort can be specified as a range of ports. -When specifying ranges for both, the number of container ports in the range must match the number of host ports in the range. -(e.g., `podman run -p 1234-1236:1222-1224 --name thisWorks -t busybox` -but not `podman run -p 1230-1236:1230-1240 --name RangeContainerPortsBiggerThanRangeHostPorts -t busybox`) -With ip: `podman run -p 127.0.0.1:$HOSTPORT:$CONTAINERPORT --name CONTAINER -t someimage` -Use `podman port` to see the actual mapping: `podman port CONTAINER $CONTAINERPORT` + + Both hostPort and containerPort can be specified as a range of ports. + + When specifying ranges for both, the number of container ports in the range must match the number of host ports in the range. + (e.g., `podman run -p 1234-1236:1222-1224 --name thisWorks -t busybox` + but not `podman run -p 1230-1236:1230-1240 --name RangeContainerPortsBiggerThanRangeHostPorts -t busybox`) + + With ip: `podman run -p 127.0.0.1:$HOSTPORT:$CONTAINERPORT --name CONTAINER -t someimage` + + Use `podman port` to see the actual mapping: `podman port CONTAINER $CONTAINERPORT` **-P**, **--publish-all**=*true*|*false* Publish all exposed ports to random ports on the host interfaces. The default is *false*. @@ -394,10 +406,11 @@ Use `podman port` to see the actual mapping: `podman port CONTAINER $CONTAINERPO When set to true publish all exposed ports to the host interfaces. The default is false. If the operator uses -P (or -p) then podman will make the exposed port accessible on the host and the ports will be available to any -client that can reach the host. When using -P, podman will bind any exposed -port to a random port on the host within an *ephemeral port range* defined by -`/proc/sys/net/ipv4/ip_local_port_range`. To find the mapping between the host -ports and the exposed ports, use `podman port`. +client that can reach the host. + + When using -P, podman will bind any exposed port to a random port on the host +within an *ephemeral port range* defined by `/proc/sys/net/ipv4/ip_local_port_range`. +To find the mapping between the host ports and the exposed ports, use `podman port`. **--quiet, -q** @@ -416,18 +429,18 @@ its root filesystem mounted as read only prohibiting any writes. **--security-opt**=[] Security Options - "label=user:USER" : Set the label user for the container - "label=role:ROLE" : Set the label role for the container - "label=type:TYPE" : Set the label type for the container - "label=level:LEVEL" : Set the label level for the container - "label=disable" : Turn off label confinement for the container - "no-new-privileges" : Disable container processes from gaining additional privileges + - `label=user:USER` : Set the label user for the container + - `label=role:ROLE` : Set the label role for the container + - `label=type:TYPE` : Set the label type for the container + - `label=level:LEVEL` : Set the label level for the container + - `label=disable` : Turn off label confinement for the container + - `no-new-privileges` : Disable container processes from gaining additional privileges - "seccomp=unconfined" : Turn off seccomp confinement for the container - "seccomp=profile.json : White listed syscalls seccomp Json file to be used as a seccomp filter + - `seccomp=unconfined` : Turn off seccomp confinement for the container + - `seccomp=profile.json` : White listed syscalls seccomp Json file to be used as a seccomp filter - "apparmor=unconfined" : Turn off apparmor confinement for the container - "apparmor=your-profile" : Set the apparmor confinement profile for the container + - `apparmor=unconfined` : Turn off apparmor confinement for the container + - `apparmor=your-profile` : Set the apparmor confinement profile for the container **--shm-size**="" Size of `/dev/shm`. The format is ``. `number` must be greater than `0`. @@ -438,10 +451,10 @@ its root filesystem mounted as read only prohibiting any writes. Proxy received signals to the process (non-TTY mode only). SIGCHLD, SIGSTOP, and SIGKILL are not proxied. The default is *true*. **--stop-signal**=*SIGTERM* - Signal to stop a container. Default is SIGTERM. + Signal to stop a container. Default is SIGTERM. **--stop-timeout**=*10* - Timeout (in seconds) to stop a container. Default is 10. + Timeout (in seconds) to stop a container. Default is 10. **--subgidname**=name Name for GID map from the `/etc/subgid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--gidmap`. @@ -450,25 +463,32 @@ its root filesystem mounted as read only prohibiting any writes. Name for UID map from the `/etc/subuid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--uidmap`. **--sysctl**=SYSCTL - Configure namespaced kernel parameters at runtime + Configure namespaced kernel parameters at runtime - IPC Namespace - current sysctls allowed: + IPC Namespace - current sysctls allowed: - kernel.msgmax, kernel.msgmnb, kernel.msgmni, kernel.sem, kernel.shmall, kernel.shmmax, kernel.shmmni, kernel.shm_rmid_forced - Sysctls beginning with fs.mqueue.* + - kernel.msgmax + - kernel.msgmnb + - kernel.msgmni + - kernel.sem + - kernel.shmall + - kernel.shmmax + - kernel.shmmni + - kernel.shm_rmid_forced + - Sysctls beginning with fs.mqueue.* - Note: if you use the `--ipc=host` option these sysctls will not be allowed. + Note: if you use the `--ipc=host` option these sysctls will not be allowed. - Network Namespace - current sysctls allowed: - Sysctls beginning with net.* + Network Namespace - current sysctls allowed: + - Sysctls beginning with net.* - Note: if you use the `--network=host` option these sysctls will not be allowed. + Note: if you use the `--network=host` option these sysctls will not be allowed. **--tmpfs**=[] Create a tmpfs mount Mount a temporary filesystem (`tmpfs`) mount into a container, for example: - $ podman run -d --tmpfs /tmp:rw,size=787448k,mode=1777 my_image + $ podman run -d --tmpfs /tmp:rw,size=787448k,mode=1777 my_image This command mounts a `tmpfs` at `/tmp` within the container. The supported mount options are the same as the Linux default `mount` flags. If you do not specify @@ -482,7 +502,7 @@ any options, the systems uses the following options: input of the container. This can be used, for example, to run a throwaway interactive shell. The default is false. -Note: The **-t** option is incompatible with a redirection of the podman client + **NOTE**: The **-t** option is incompatible with a redirection of the podman client standard input. **--uidmap**=map @@ -504,20 +524,22 @@ standard input. **--userns**="" Set the usernamespace mode for the container. The use of userns is disabled by default. - **host**: use the host usernamespace and enable all privileged options (e.g., `pid=host` or `--privileged`). + `host`: use the host usernamespace and enable all privileged options (e.g., `pid=host` or `--privileged`). **--uts**=*host* Set the UTS mode for the container - **host**: use the host's UTS namespace inside the container. - Note: the host mode gives the container access to changing the host's hostname and is therefore considered insecure. + + `host`: use the host's UTS namespace inside the container. + + **NOTE**: the host mode gives the container access to changing the host's hostname and is therefore considered insecure. **-v**|**--volume**[=*[HOST-DIR:CONTAINER-DIR[:OPTIONS]]*] Create a bind mount. If you specify, ` -v /HOST-DIR:/CONTAINER-DIR`, podman bind mounts `/HOST-DIR` in the host to `/CONTAINER-DIR` in the podman container. The `OPTIONS` are a comma delimited list and can be: - * [rw|ro] - * [z|Z] + * [`rw`|`ro`] + * [`z`|`Z`] * [`[r]shared`|`[r]slave`|`[r]private`] The `CONTAINER-DIR` must be an absolute path such as `/src/docs`. The `HOST-DIR` @@ -790,11 +812,7 @@ You would have to write policy defining a `svirt_apache_t` type. If you want to set `/dev/sda` device weight to `200`, you can specify the device weight by `--blkio-weight-device` flag. Use the following command: - # podman run -it --blkio-weight-device "/dev/sda:200" ubuntu - -``` -$ podman run -d busybox top -``` + # podman run -it --blkio-weight-device "/dev/sda:200" ubuntu ### Setting Namespaced Kernel Parameters (Sysctls) -- cgit v1.2.3-54-g00ecf