From ec9dad7e4f1547bb46c46c36bf5eb56ef5b09bb0 Mon Sep 17 00:00:00 2001 From: Ed Santiago Date: Tue, 9 Feb 2021 14:33:19 -0700 Subject: buildah bud tests under podman-remote New functionality -- mostly in the diffs we apply to buildah's helpers.bash -- to enable running buildah-bud tests under podman-remote. The gist of it is, we start a 'podman system service' before each test, and clean it up on test exit. Design decision: the diff file for helpers.bash is no longer trailing-whitespace-clean: that ended up producing diffs that git wouldn't apply, because in some cases the whitespace is actually important. In order to pass CI, we need to exclude this file from some checks. Signed-off-by: Ed Santiago --- test/buildah-bud/apply-podman-deltas | 61 ++++++++++++++++----- test/buildah-bud/buildah-tests.diff | 93 ++++++++++++++++++++++++++++----- test/buildah-bud/make-new-buildah-diffs | 8 ++- test/buildah-bud/run-buildah-bud-tests | 4 +- 4 files changed, 134 insertions(+), 32 deletions(-) (limited to 'test/buildah-bud') diff --git a/test/buildah-bud/apply-podman-deltas b/test/buildah-bud/apply-podman-deltas index 41c84257f..18b3d56f9 100755 --- a/test/buildah-bud/apply-podman-deltas +++ b/test/buildah-bud/apply-podman-deltas @@ -56,22 +56,31 @@ function errmsg() { done } -# skip: used to add a 'skip' to one specific test -function skip() { +# _skip: used to add a 'skip' or 'skip_if_remote' to one specific test +function _skip() { + local skip=$1; shift local reason=$1; shift # All further arguments are test names for t in "$@"; do if fgrep -qx "@test \"$t\" {" $BUD; then - $ECHO "@test \"$t\" : skip \"$reason\"" + $ECHO "@test \"$t\" : $skip \"$reason\"" t=${t//\//\\/} - sed -i -e "/^\@test \"$t\" {/ a \ \ skip \"$reason\"" $BUD + sed -i -e "/^\@test \"$t\" {/ a \ \ $skip \"$reason\"" $BUD else - warn "[skip] Did not find test \"$t\" in $BUD" + warn "[$skip] Did not find test \"$t\" in $BUD" fi done } +function skip() { + _skip "skip" "$@" +} + +function skip_if_remote() { + _skip "skip_if_remote" "$@" +} + # END handlers ############################################################################### # BEGIN user-customizable section @@ -79,14 +88,14 @@ function skip() { # These are the hand-maintained exceptions. This is what you want to edit # or update as needed. # -# There are two directives you can use below: +# There are three directives you can use below: # # errmsg "old-message" "new-message" "test name" ["test name"...] # # This replaced "old-message" with "new-message" in @test "test name". # It is used when a podman error message differs from buildah's. # -# skip "reason" "test name" ["test name"...] +# [skip | skip_if_remote] "reason" "test name" ["test name"...] # # This adds a 'skip' statement as the first line of @test "test name". # It is used when a test does not work in podman, either for permanent @@ -126,6 +135,7 @@ errmsg "no such file or directory" \ ############################################################################### # BEGIN tests that don't make sense under podman due to fundamental differences + skip "N/A under podman" \ "bud-flags-order-verification" @@ -147,13 +157,13 @@ skip "Too much effort to spin up a local registry" \ skip "FIXME FIXME FIXME: argument-order incompatible with podman" \ "bud-squash-hardlinks" -skip "FIXME FIXME FIXME we'll figure these out later" \ - "bud-multi-stage-nocache-nocommit" \ - "bud with --cgroup-parent" +skip "FIXME FIXME FIXME: this passes on Ed's laptop, fails in CI??" \ + "bud-multi-stage-nocache-nocommit" -# see https://github.com/containers/podman/pull/10147#issuecomment-832503633 -skip "FIXME FIXME FIXME podman save/load has been fixed (but not yet used in Buildah CI)" \ - "bud with --layers and --no-cache flags" +# This will probably never work: buildah and podman have incompatible defaults +# Documented in https://github.com/containers/podman/issues/10412 +skip "buildah runs with --cgroup-manager=cgroupfs, podman with systemd" \ + "bud with --cgroup-parent" # see https://github.com/containers/podman/pull/10829 skip "FIXME FIXME FIXME - requires updated CI images (#10829)" \ @@ -163,6 +173,31 @@ skip "FIXME FIXME FIXME - requires updated CI images (#10829)" \ # BEGIN tests which are skipped due to actual podman bugs. +############################################################################### +# BEGIN tests which are skipped because they make no sense under podman-remote + +skip_if_remote "--target does not work with podman-remote" \ + "bud-target" + +skip_if_remote "--runtime not meaningful under podman-remote" \ + "bud with --runtime and --runtime-flag" + +skip_if_remote "secret files not implemented under podman-remote" \ + "bud with containerfile secret" \ + "bud with containerfile secret accessed on second RUN" \ + "bud with containerfile secret options" + +skip_if_remote "volumes don't work with podman-remote" \ + "buildah bud --volume" \ + "buildah-bud-policy" + +# See podman #9890 for discussion +skip_if_remote "--stdin option will not be implemented in podman-remote" \ + "bud test no --stdin" + +############################################################################### +# BEGIN tests which are skipped due to actual podman-remote bugs. + ############################################################################### # Done. diff --git a/test/buildah-bud/buildah-tests.diff b/test/buildah-bud/buildah-tests.diff index 1c8592f7f..66d470648 100644 --- a/test/buildah-bud/buildah-tests.diff +++ b/test/buildah-bud/buildah-tests.diff @@ -1,23 +1,75 @@ -From a00508656599b24776982996fdb44d4874338fd4 Mon Sep 17 00:00:00 2001 +From d684753d6f00ee95720d8fb2e09c7ac19b37b01e Mon Sep 17 00:00:00 2001 From: Ed Santiago Date: Tue, 9 Feb 2021 17:28:05 -0700 Subject: [PATCH] tweaks for running buildah tests under podman Signed-off-by: Ed Santiago --- - tests/helpers.bash | 28 +++++++++++++++++++++++++--- - 1 file changed, 25 insertions(+), 3 deletions(-) + tests/helpers.bash | 71 +++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 67 insertions(+), 4 deletions(-) diff --git a/tests/helpers.bash b/tests/helpers.bash -index 11deb367..08e73954 100644 +index 11deb367..44c71dad 100644 --- a/tests/helpers.bash +++ b/tests/helpers.bash -@@ -164,15 +164,37 @@ function run_buildah() { +@@ -34,6 +34,23 @@ function setup() { + ROOTDIR_OPTS="--root ${TESTDIR}/root --runroot ${TESTDIR}/runroot --storage-driver ${STORAGE_DRIVER}" + BUILDAH_REGISTRY_OPTS="--registries-conf ${TESTSDIR}/registries.conf --registries-conf-dir ${TESTDIR}/registries.d --short-name-alias-conf ${TESTDIR}/cache/shortnames.conf" + PODMAN_REGISTRY_OPTS="--registries-conf ${TESTSDIR}/registries.conf" ++ ++ PODMAN_SERVER_PID= ++ PODMAN_NATIVE="${PODMAN_BINARY} ${ROOTDIR_OPTS} ${PODMAN_REGISTRY_OPTS}" ++ if [[ -n "$REMOTE" ]]; then ++ PODMAN_NATIVE="${PODMAN_BINARY%%-remote} ${ROOTDIR_OPTS} ${PODMAN_REGISTRY_OPTS}" ++ # static CONTAINERS_CONF needed for capabilities test. As of 2021-07-01 ++ # no tests in bud.bats override this; if at some point any test does ++ # so, it will probably need to be skip_if_remote()d. ++ env CONTAINERS_CONF=${CONTAINERS_CONF:-$(dirname ${BASH_SOURCE})/containers.conf} $PODMAN_NATIVE system service --timeout=0 & ++ PODMAN_SERVER_PID=$! ++ local timeout=10 ++ while ((timeout > 0)); do ++ test -S /run/podman/podman.sock && return ++ sleep 0.2 ++ done ++ die "podman server never came up" ++ fi + } + + function starthttpd() { +@@ -57,6 +74,12 @@ function stophttpd() { + function teardown() { + stophttpd + ++ if [[ -n "$PODMAN_SERVER_PID" ]]; then ++ kill $PODMAN_SERVER_PID ++ wait $PODMAN_SERVER_PID ++ rm -f /run/podman/podman.sock ++ fi ++ + # Workaround for #1991 - buildah + overlayfs leaks mount points. + # Many tests leave behind /var/tmp/.../root/overlay and sub-mounts; + # let's find those and clean them up, otherwise 'rm -rf' fails. +@@ -129,7 +152,13 @@ function copy() { + } + + function podman() { +- command podman ${PODMAN_REGISTRY_OPTS} ${ROOTDIR_OPTS} "$@" ++ echo "# ... podman $*" >&3 ++ ${PODMAN_BINARY} ${PODMAN_REGISTRY_OPTS} ${ROOTDIR_OPTS} "$@" ++} ++ ++function podman-remote() { ++ echo "# ... podman-remote $*" >&3 ++ ${PODMAN_BINARY} ${ROOTDIR_OPTS} "$@" + } + + ################# +@@ -164,15 +193,40 @@ function run_buildah() { --retry) retry=3; shift;; # retry network flakes esac - + + local podman_or_buildah=${BUILDAH_BINARY} -+ local registry_opts=${BUILDAH_REGISTRY_OPTS} ++ local _opts="${ROOTDIR_OPTS} ${BUILDAH_REGISTRY_OPTS}" + if [[ $1 == "bud" || $1 == "build-using-dockerfile" ]]; then + shift + # podman defaults to --layers=true; buildah to --false. @@ -29,7 +81,10 @@ index 11deb367..08e73954 100644 + set "build" "--force-rm=false" "--layers=false" "$@" + fi + podman_or_buildah=${PODMAN_BINARY} -+ registry_opts=${PODMAN_REGISTRY_OPTS} ++ _opts="${ROOTDIR_OPTS} ${PODMAN_REGISTRY_OPTS}" ++ if [[ -n "$REMOTE" ]]; then ++ _opts= ++ fi + + # podman always exits 125 where buildah exits 1 or 2 + case $expected_rc in @@ -41,17 +96,31 @@ index 11deb367..08e73954 100644 # Remember command args, for possible use in later diagnostic messages - MOST_RECENT_BUILDAH_COMMAND="buildah $*" + MOST_RECENT_BUILDAH_COMMAND="$cmd_basename $*" - + while [ $retry -gt 0 ]; do retry=$(( retry - 1 )) - + # stdout is only emitted upon error; this echo is to help a debugger - echo "\$ $BUILDAH_BINARY $*" - run env CONTAINERS_CONF=${CONTAINERS_CONF:-$(dirname ${BASH_SOURCE})/containers.conf} timeout --foreground --kill=10 $BUILDAH_TIMEOUT ${BUILDAH_BINARY} ${BUILDAH_REGISTRY_OPTS} ${ROOTDIR_OPTS} "$@" + echo "\$ $cmd_basename $*" -+ run env CONTAINERS_CONF=${CONTAINERS_CONF:-$(dirname ${BASH_SOURCE})/containers.conf} timeout --foreground --kill=10 $BUILDAH_TIMEOUT ${podman_or_buildah} ${registry_opts} ${ROOTDIR_OPTS} "$@" ++ run env CONTAINERS_CONF=${CONTAINERS_CONF:-$(dirname ${BASH_SOURCE})/containers.conf} timeout --foreground --kill=10 $BUILDAH_TIMEOUT ${podman_or_buildah} ${_opts} "$@" # without "quotes", multiple lines are glommed together into one if [ -n "$output" ]; then echo "$output" --- +@@ -396,3 +450,12 @@ function skip_if_no_docker() { + skip "this test needs actual docker, not podman-docker" + fi + } ++ ++#################### ++# skip_if_remote # (only applicable for podman) ++#################### ++function skip_if_remote() { ++ if [[ -n "$REMOTE" ]]; then ++ skip "${1:-test does not work with podman-remote}" ++ fi ++} +-- 2.31.1 + diff --git a/test/buildah-bud/make-new-buildah-diffs b/test/buildah-bud/make-new-buildah-diffs index 11987e376..3d0a77008 100644 --- a/test/buildah-bud/make-new-buildah-diffs +++ b/test/buildah-bud/make-new-buildah-diffs @@ -56,8 +56,6 @@ if [[ -n "$patch2" ]]; then die "Internal error: I thought I checked for squashed commits, but still see $patch2" fi -# All looks good. Now write that patch into its proper place in the -# podman repo. The sed and tac mess strips trailing whitespace and -# empty lines; we need to do this to pass github CI checks. -sed -e 's/ \+$//' <0001-*.patch |\ - tac | sed -e '/./,$!d' | tac >| ../test/buildah-bud/buildah-tests.diff +# All looks good. We can now copy that patch into its proper place in the +# podman repo. +cp 0001-*.patch ../test/buildah-bud/buildah-tests.diff diff --git a/test/buildah-bud/run-buildah-bud-tests b/test/buildah-bud/run-buildah-bud-tests index a37e90dc4..eb8de5618 100755 --- a/test/buildah-bud/run-buildah-bud-tests +++ b/test/buildah-bud/run-buildah-bud-tests @@ -69,8 +69,7 @@ REMOTE= # If remote, start server & change path if [[ "${PODBIN_NAME:-}" = "remote" ]]; then REMOTE=1 - echo "$ME: remote tests are not working yet" >&2 - exit 1 + PODMAN_BINARY+="-remote" fi function die() { @@ -214,6 +213,7 @@ review the test failure and double-check your changes. (set -x;sudo env TMPDIR=/var/tmp \ PODMAN_BINARY=$PODMAN_BINARY \ + REMOTE=$REMOTE \ BUILDAH_BINARY=$(pwd)/bin/buildah \ COPY_BINARY=$(pwd)/bin/copy \ bats "${bats_filter[@]}" tests/bud.bats) -- cgit v1.2.3-54-g00ecf