From 9d6dce119949d340ebb42becae018a3c11148690 Mon Sep 17 00:00:00 2001 From: Daniel J Walsh Date: Thu, 1 Aug 2019 03:46:14 -0400 Subject: github.com/containers/storage v1.12.13 Signed-off-by: Daniel J Walsh --- vendor/github.com/DataDog/zstd/zstd.h | 1913 --------------------------------- 1 file changed, 1913 deletions(-) delete mode 100644 vendor/github.com/DataDog/zstd/zstd.h (limited to 'vendor/github.com/DataDog/zstd/zstd.h') diff --git a/vendor/github.com/DataDog/zstd/zstd.h b/vendor/github.com/DataDog/zstd/zstd.h deleted file mode 100644 index 53470c18f..000000000 --- a/vendor/github.com/DataDog/zstd/zstd.h +++ /dev/null @@ -1,1913 +0,0 @@ -/* - * Copyright (c) 2016-present, Yann Collet, Facebook, Inc. - * All rights reserved. - * - * This source code is licensed under both the BSD-style license (found in the - * LICENSE file in the root directory of this source tree) and the GPLv2 (found - * in the COPYING file in the root directory of this source tree). - * You may select, at your option, one of the above-listed licenses. - */ -#if defined (__cplusplus) -extern "C" { -#endif - -#ifndef ZSTD_H_235446 -#define ZSTD_H_235446 - -/* ====== Dependency ======*/ -#include /* size_t */ - - -/* ===== ZSTDLIB_API : control library symbols visibility ===== */ -#ifndef ZSTDLIB_VISIBILITY -# if defined(__GNUC__) && (__GNUC__ >= 4) -# define ZSTDLIB_VISIBILITY __attribute__ ((visibility ("default"))) -# else -# define ZSTDLIB_VISIBILITY -# endif -#endif -#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) -# define ZSTDLIB_API __declspec(dllexport) ZSTDLIB_VISIBILITY -#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) -# define ZSTDLIB_API __declspec(dllimport) ZSTDLIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ -#else -# define ZSTDLIB_API ZSTDLIB_VISIBILITY -#endif - - -/******************************************************************************* - Introduction - - zstd, short for Zstandard, is a fast lossless compression algorithm, targeting - real-time compression scenarios at zlib-level and better compression ratios. - The zstd compression library provides in-memory compression and decompression - functions. - - The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), - which is currently 22. Levels >= 20, labeled `--ultra`, should be used with - caution, as they require more memory. The library also offers negative - compression levels, which extend the range of speed vs. ratio preferences. - The lower the level, the faster the speed (at the cost of compression). - - Compression can be done in: - - a single step (described as Simple API) - - a single step, reusing a context (described as Explicit context) - - unbounded multiple steps (described as Streaming compression) - - The compression ratio achievable on small data can be highly improved using - a dictionary. Dictionary compression can be performed in: - - a single step (described as Simple dictionary API) - - a single step, reusing a dictionary (described as Bulk-processing - dictionary API) - - Advanced experimental functions can be accessed using - `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. - - Advanced experimental APIs should never be used with a dynamically-linked - library. They are not "stable"; their definitions or signatures may change in - the future. Only static linking is allowed. -*******************************************************************************/ - -/*------ Version ------*/ -#define ZSTD_VERSION_MAJOR 1 -#define ZSTD_VERSION_MINOR 4 -#define ZSTD_VERSION_RELEASE 0 - -#define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) -ZSTDLIB_API unsigned ZSTD_versionNumber(void); /**< to check runtime library version */ - -#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE -#define ZSTD_QUOTE(str) #str -#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) -#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) -ZSTDLIB_API const char* ZSTD_versionString(void); /* requires v1.3.0+ */ - -/*************************************** -* Default constant -***************************************/ -#ifndef ZSTD_CLEVEL_DEFAULT -# define ZSTD_CLEVEL_DEFAULT 3 -#endif - -/*************************************** -* Constants -***************************************/ - -/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ -#define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ -#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ -#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ -#define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 - -#define ZSTD_BLOCKSIZELOG_MAX 17 -#define ZSTD_BLOCKSIZE_MAX (1<= `ZSTD_compressBound(srcSize)`. - * @return : compressed size written into `dst` (<= `dstCapacity), - * or an error code if it fails (which can be tested using ZSTD_isError()). */ -ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - int compressionLevel); - -/*! ZSTD_decompress() : - * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. - * `dstCapacity` is an upper bound of originalSize to regenerate. - * If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data. - * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), - * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ -ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, - const void* src, size_t compressedSize); - -/*! ZSTD_getFrameContentSize() : requires v1.3.0+ - * `src` should point to the start of a ZSTD encoded frame. - * `srcSize` must be at least as large as the frame header. - * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. - * @return : - decompressed size of `src` frame content, if known - * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined - * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) - * note 1 : a 0 return value means the frame is valid but "empty". - * note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode. - * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. - * In which case, it's necessary to use streaming mode to decompress data. - * Optionally, application can rely on some implicit limit, - * as ZSTD_decompress() only needs an upper bound of decompressed size. - * (For example, data could be necessarily cut into blocks <= 16 KB). - * note 3 : decompressed size is always present when compression is completed using single-pass functions, - * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). - * note 4 : decompressed size can be very large (64-bits value), - * potentially larger than what local system can handle as a single memory segment. - * In which case, it's necessary to use streaming mode to decompress data. - * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. - * Always ensure return value fits within application's authorized limits. - * Each application can set its own limits. - * note 6 : This function replaces ZSTD_getDecompressedSize() */ -#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) -#define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) -ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); - -/*! ZSTD_getDecompressedSize() : - * NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize(). - * Both functions work the same way, but ZSTD_getDecompressedSize() blends - * "empty", "unknown" and "error" results to the same return value (0), - * while ZSTD_getFrameContentSize() gives them separate return values. - * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ -ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); - -/*! ZSTD_findFrameCompressedSize() : - * `src` should point to the start of a ZSTD frame or skippable frame. - * `srcSize` must be >= first frame size - * @return : the compressed size of the first frame starting at `src`, - * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, - * or an error code if input is invalid */ -ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); - - -/*====== Helper functions ======*/ -#define ZSTD_COMPRESSBOUND(srcSize) ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ -ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ -ZSTDLIB_API unsigned ZSTD_isError(size_t code); /*!< tells if a `size_t` function result is an error code */ -ZSTDLIB_API const char* ZSTD_getErrorName(size_t code); /*!< provides readable string from an error code */ -ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed */ -ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ - - -/*************************************** -* Explicit context -***************************************/ -/*= Compression context - * When compressing many times, - * it is recommended to allocate a context just once, and re-use it for each successive compression operation. - * This will make workload friendlier for system's memory. - * Use one context per thread for parallel execution in multi-threaded environments. */ -typedef struct ZSTD_CCtx_s ZSTD_CCtx; -ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); -ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); - -/*! ZSTD_compressCCtx() : - * Same as ZSTD_compress(), using an explicit ZSTD_CCtx - * The function will compress at requested compression level, - * ignoring any other parameter */ -ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - int compressionLevel); - -/*= Decompression context - * When decompressing many times, - * it is recommended to allocate a context only once, - * and re-use it for each successive compression operation. - * This will make workload friendlier for system's memory. - * Use one context per thread for parallel execution. */ -typedef struct ZSTD_DCtx_s ZSTD_DCtx; -ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); -ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); - -/*! ZSTD_decompressDCtx() : - * Same as ZSTD_decompress(), - * requires an allocated ZSTD_DCtx. - * Compatible with sticky parameters. - */ -ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize); - - -/*************************************** -* Advanced compression API -***************************************/ - -/* API design : - * Parameters are pushed one by one into an existing context, - * using ZSTD_CCtx_set*() functions. - * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. - * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! - * They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx() - * - * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). - * - * This API supercedes all other "advanced" API entry points in the experimental section. - * In the future, we expect to remove from experimental API entry points which are redundant with this API. - */ - - -/* Compression strategies, listed from fastest to strongest */ -typedef enum { ZSTD_fast=1, - ZSTD_dfast=2, - ZSTD_greedy=3, - ZSTD_lazy=4, - ZSTD_lazy2=5, - ZSTD_btlazy2=6, - ZSTD_btopt=7, - ZSTD_btultra=8, - ZSTD_btultra2=9 - /* note : new strategies _might_ be added in the future. - Only the order (from fast to strong) is guaranteed */ -} ZSTD_strategy; - - -typedef enum { - - /* compression parameters - * Note: When compressing with a ZSTD_CDict these parameters are superseded - * by the parameters used to construct the ZSTD_CDict. See ZSTD_CCtx_refCDict() - * for more info (superseded-by-cdict). */ - ZSTD_c_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table - * Default level is ZSTD_CLEVEL_DEFAULT==3. - * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. - * Note 1 : it's possible to pass a negative compression level. - * Note 2 : setting a level sets all default values of other compression parameters */ - ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. - * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. - * Special: value 0 means "use default windowLog". - * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT - * requires explicitly allowing such window size at decompression stage if using streaming. */ - ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. - * Resulting memory usage is (1 << (hashLog+2)). - * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. - * Larger tables improve compression ratio of strategies <= dFast, - * and improve speed of strategies > dFast. - * Special: value 0 means "use default hashLog". */ - ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. - * Resulting memory usage is (1 << (chainLog+2)). - * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. - * Larger tables result in better and slower compression. - * This parameter is useless when using "fast" strategy. - * It's still useful when using "dfast" strategy, - * in which case it defines a secondary probe table. - * Special: value 0 means "use default chainLog". */ - ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. - * More attempts result in better and slower compression. - * This parameter is useless when using "fast" and "dFast" strategies. - * Special: value 0 means "use default searchLog". */ - ZSTD_c_minMatch=105, /* Minimum size of searched matches. - * Note that Zstandard can still find matches of smaller size, - * it just tweaks its search algorithm to look for this size and larger. - * Larger values increase compression and decompression speed, but decrease ratio. - * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. - * Note that currently, for all strategies < btopt, effective minimum is 4. - * , for all strategies > fast, effective maximum is 6. - * Special: value 0 means "use default minMatchLength". */ - ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. - * For strategies btopt, btultra & btultra2: - * Length of Match considered "good enough" to stop search. - * Larger values make compression stronger, and slower. - * For strategy fast: - * Distance between match sampling. - * Larger values make compression faster, and weaker. - * Special: value 0 means "use default targetLength". */ - ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. - * The higher the value of selected strategy, the more complex it is, - * resulting in stronger and slower compression. - * Special: value 0 means "use default strategy". */ - - /* LDM mode parameters */ - ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. - * This parameter is designed to improve compression ratio - * for large inputs, by finding large matches at long distance. - * It increases memory usage and window size. - * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB - * except when expressly set to a different value. */ - ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. - * Larger values increase memory usage and compression ratio, - * but decrease compression speed. - * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX - * default: windowlog - 7. - * Special: value 0 means "automatically determine hashlog". */ - ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. - * Larger/too small values usually decrease compression ratio. - * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. - * Special: value 0 means "use default value" (default: 64). */ - ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. - * Larger values improve collision resolution but decrease compression speed. - * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. - * Special: value 0 means "use default value" (default: 3). */ - ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. - * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). - * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. - * Larger values improve compression speed. - * Deviating far from default value will likely result in a compression ratio decrease. - * Special: value 0 means "automatically determine hashRateLog". */ - - /* frame parameters */ - ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) - * Content size must be known at the beginning of compression. - * This is automatically the case when using ZSTD_compress2(), - * For streaming variants, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ - ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ - ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ - - /* multi-threading parameters */ - /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). - * They return an error otherwise. */ - ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. - * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() : - * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, - * while compression work is performed in parallel, within worker threads. - * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : - * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). - * More workers improve speed, but also increase memory usage. - * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */ - ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. - * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. - * 0 means default, which is dynamically determined based on compression parameters. - * Job size must be a minimum of overlap size, or 1 MB, whichever is largest. - * The minimum size is automatically and transparently enforced */ - ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. - * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. - * It helps preserve compression ratio, while each job is compressed in parallel. - * This value is enforced only when nbWorkers >= 1. - * Larger values increase compression ratio, but decrease speed. - * Possible values range from 0 to 9 : - * - 0 means "default" : value will be determined by the library, depending on strategy - * - 1 means "no overlap" - * - 9 means "full overlap", using a full window size. - * Each intermediate rank increases/decreases load size by a factor 2 : - * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default - * default value varies between 6 and 9, depending on strategy */ - - /* note : additional experimental parameters are also available - * within the experimental section of the API. - * At the time of this writing, they include : - * ZSTD_c_rsyncable - * ZSTD_c_format - * ZSTD_c_forceMaxWindow - * ZSTD_c_forceAttachDict - * ZSTD_c_literalCompressionMode - * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. - * note : never ever use experimentalParam? names directly; - * also, the enums values themselves are unstable and can still change. - */ - ZSTD_c_experimentalParam1=500, - ZSTD_c_experimentalParam2=10, - ZSTD_c_experimentalParam3=1000, - ZSTD_c_experimentalParam4=1001, - ZSTD_c_experimentalParam5=1002, -} ZSTD_cParameter; - -typedef struct { - size_t error; - int lowerBound; - int upperBound; -} ZSTD_bounds; - -/*! ZSTD_cParam_getBounds() : - * All parameters must belong to an interval with lower and upper bounds, - * otherwise they will either trigger an error or be automatically clamped. - * @return : a structure, ZSTD_bounds, which contains - * - an error status field, which must be tested using ZSTD_isError() - * - lower and upper bounds, both inclusive - */ -ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); - -/*! ZSTD_CCtx_setParameter() : - * Set one compression parameter, selected by enum ZSTD_cParameter. - * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). - * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). - * Setting a parameter is generally only possible during frame initialization (before starting compression). - * Exception : when using multi-threading mode (nbWorkers >= 1), - * the following parameters can be updated _during_ compression (within same frame): - * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. - * new parameters will be active for next job only (after a flush()). - * @return : an error code (which can be tested using ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); - -/*! ZSTD_CCtx_setPledgedSrcSize() : - * Total input data size to be compressed as a single frame. - * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. - * This value will also be controlled at end of frame, and trigger an error if not respected. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. - * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. - * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. - * Note 2 : pledgedSrcSize is only valid once, for the next frame. - * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. - * Note 3 : Whenever all input data is provided and consumed in a single round, - * for example with ZSTD_compress2(), - * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), - * this value is automatically overridden by srcSize instead. - */ -ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); - -typedef enum { - ZSTD_reset_session_only = 1, - ZSTD_reset_parameters = 2, - ZSTD_reset_session_and_parameters = 3 -} ZSTD_ResetDirective; - -/*! ZSTD_CCtx_reset() : - * There are 2 different things that can be reset, independently or jointly : - * - The session : will stop compressing current frame, and make CCtx ready to start a new one. - * Useful after an error, or to interrupt any ongoing compression. - * Any internal data not yet flushed is cancelled. - * Compression parameters and dictionary remain unchanged. - * They will be used to compress next frame. - * Resetting session never fails. - * - The parameters : changes all parameters back to "default". - * This removes any reference to any dictionary too. - * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) - * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) - * - Both : similar to resetting the session, followed by resetting parameters. - */ -ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); - -/*! ZSTD_compress2() : - * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. - * ZSTD_compress2() always starts a new frame. - * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. - * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() - * - The function is always blocking, returns when compression is completed. - * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. - * @return : compressed size written into `dst` (<= `dstCapacity), - * or an error code if it fails (which can be tested using ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize); - - -/*************************************** -* Advanced decompression API -***************************************/ - -/* The advanced API pushes parameters one by one into an existing DCtx context. - * Parameters are sticky, and remain valid for all following frames - * using the same DCtx context. - * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). - * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). - * Therefore, no new decompression function is necessary. - */ - -typedef enum { - - ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which - * the streaming API will refuse to allocate memory buffer - * in order to protect the host from unreasonable memory requirements. - * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. - * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). - * Special: value 0 means "use default maximum windowLog". */ - - /* note : additional experimental parameters are also available - * within the experimental section of the API. - * At the time of this writing, they include : - * ZSTD_c_format - * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. - * note : never ever use experimentalParam? names directly - */ - ZSTD_d_experimentalParam1=1000 - -} ZSTD_dParameter; - -/*! ZSTD_dParam_getBounds() : - * All parameters must belong to an interval with lower and upper bounds, - * otherwise they will either trigger an error or be automatically clamped. - * @return : a structure, ZSTD_bounds, which contains - * - an error status field, which must be tested using ZSTD_isError() - * - both lower and upper bounds, inclusive - */ -ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); - -/*! ZSTD_DCtx_setParameter() : - * Set one compression parameter, selected by enum ZSTD_dParameter. - * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). - * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). - * Setting a parameter is only possible during frame initialization (before starting decompression). - * @return : 0, or an error code (which can be tested using ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); - -/*! ZSTD_DCtx_reset() : - * Return a DCtx to clean state. - * Session and parameters can be reset jointly or separately. - * Parameters can only be reset when no active frame is being decompressed. - * @return : 0, or an error code, which can be tested with ZSTD_isError() - */ -ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); - - -/**************************** -* Streaming -****************************/ - -typedef struct ZSTD_inBuffer_s { - const void* src; /**< start of input buffer */ - size_t size; /**< size of input buffer */ - size_t pos; /**< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ -} ZSTD_inBuffer; - -typedef struct ZSTD_outBuffer_s { - void* dst; /**< start of output buffer */ - size_t size; /**< size of output buffer */ - size_t pos; /**< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ -} ZSTD_outBuffer; - - - -/*-*********************************************************************** -* Streaming compression - HowTo -* -* A ZSTD_CStream object is required to track streaming operation. -* Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. -* ZSTD_CStream objects can be reused multiple times on consecutive compression operations. -* It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. -* -* For parallel execution, use one separate ZSTD_CStream per thread. -* -* note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. -* -* Parameters are sticky : when starting a new compression on the same context, -* it will re-use the same sticky parameters as previous compression session. -* When in doubt, it's recommended to fully initialize the context before usage. -* Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), -* ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to -* set more specific parameters, the pledged source size, or load a dictionary. -* -* Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to -* consume input stream. The function will automatically update both `pos` -* fields within `input` and `output`. -* Note that the function may not consume the entire input, for example, because -* the output buffer is already full, in which case `input.pos < input.size`. -* The caller must check if input has been entirely consumed. -* If not, the caller must make some room to receive more compressed data, -* and then present again remaining input data. -* note: ZSTD_e_continue is guaranteed to make some forward progress when called, -* but doesn't guarantee maximal forward progress. This is especially relevant -* when compressing with multiple threads. The call won't block if it can -* consume some input, but if it can't it will wait for some, but not all, -* output to be flushed. -* @return : provides a minimum amount of data remaining to be flushed from internal buffers -* or an error code, which can be tested using ZSTD_isError(). -* -* At any moment, it's possible to flush whatever data might remain stuck within internal buffer, -* using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. -* Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). -* In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. -* You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the -* operation. -* note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will -* block until the flush is complete or the output buffer is full. -* @return : 0 if internal buffers are entirely flushed, -* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), -* or an error code, which can be tested using ZSTD_isError(). -* -* Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. -* It will perform a flush and write frame epilogue. -* The epilogue is required for decoders to consider a frame completed. -* flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. -* You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to -* start a new frame. -* note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will -* block until the flush is complete or the output buffer is full. -* @return : 0 if frame fully completed and fully flushed, -* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), -* or an error code, which can be tested using ZSTD_isError(). -* -* *******************************************************************/ - -typedef ZSTD_CCtx ZSTD_CStream; /**< CCtx and CStream are now effectively same object (>= v1.3.0) */ - /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ -/*===== ZSTD_CStream management functions =====*/ -ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); -ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); - -/*===== Streaming compression functions =====*/ -typedef enum { - ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ - ZSTD_e_flush=1, /* flush any data provided so far, - * it creates (at least) one new block, that can be decoded immediately on reception; - * frame will continue: any future data can still reference previously compressed data, improving compression. - * note : multithreaded compression will block to flush as much output as possible. */ - ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. - * note that frame is only closed after compressed data is fully flushed (return value == 0). - * After that point, any additional data starts a new frame. - * note : each frame is independent (does not reference any content from previous frame). - : note : multithreaded compression will block to flush as much output as possible. */ -} ZSTD_EndDirective; - -/*! ZSTD_compressStream2() : - * Behaves about the same as ZSTD_compressStream, with additional control on end directive. - * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() - * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) - * - output->pos must be <= dstCapacity, input->pos must be <= srcSize - * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. - * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. - * - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available, - * and then immediately returns, just indicating that there is some data remaining to be flushed. - * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. - * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. - * - @return provides a minimum amount of data remaining to be flushed from internal buffers - * or an error code, which can be tested using ZSTD_isError(). - * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. - * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. - * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. - * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), - * only ZSTD_e_end or ZSTD_e_flush operations are allowed. - * Before starting a new compression job, or changing compression parameters, - * it is required to fully flush internal buffers. - */ -ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, - ZSTD_outBuffer* output, - ZSTD_inBuffer* input, - ZSTD_EndDirective endOp); - -ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /**< recommended size for input buffer */ -ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block in all circumstances. */ - -/******************************************************************************* - * This is a legacy streaming API, and can be replaced by ZSTD_CCtx_reset() and - * ZSTD_compressStream2(). It is redundant, but is still fully supported. - * Advanced parameters and dictionary compression can only be used through the - * new API. - ******************************************************************************/ - -/** - * Equivalent to: - * - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) - * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); - */ -ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); -/** - * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). - * NOTE: The return value is different. ZSTD_compressStream() returns a hint for - * the next read size (if non-zero and not an error). ZSTD_compressStream2() - * returns the number of bytes left to flush (if non-zero and not an error). - */ -ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); -/** Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ -ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); -/** Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ -ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); - - -/*-*************************************************************************** -* Streaming decompression - HowTo -* -* A ZSTD_DStream object is required to track streaming operations. -* Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. -* ZSTD_DStream objects can be re-used multiple times. -* -* Use ZSTD_initDStream() to start a new decompression operation. -* @return : recommended first input size -* Alternatively, use advanced API to set specific properties. -* -* Use ZSTD_decompressStream() repetitively to consume your input. -* The function will update both `pos` fields. -* If `input.pos < input.size`, some input has not been consumed. -* It's up to the caller to present again remaining data. -* The function tries to flush all data decoded immediately, respecting output buffer size. -* If `output.pos < output.size`, decoder has flushed everything it could. -* But if `output.pos == output.size`, there might be some data left within internal buffers., -* In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. -* Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. -* @return : 0 when a frame is completely decoded and fully flushed, -* or an error code, which can be tested using ZSTD_isError(), -* or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : -* the return value is a suggested next input size (just a hint for better latency) -* that will never request more than the remaining frame size. -* *******************************************************************************/ - -typedef ZSTD_DCtx ZSTD_DStream; /**< DCtx and DStream are now effectively same object (>= v1.3.0) */ - /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ -/*===== ZSTD_DStream management functions =====*/ -ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); -ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); - -/*===== Streaming decompression functions =====*/ - -/* This function is redundant with the advanced API and equivalent to: - * - * ZSTD_DCtx_reset(zds); - * ZSTD_DCtx_refDDict(zds, NULL); - */ -ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); - -ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); - -ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ -ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ - - -/************************** -* Simple dictionary API -***************************/ -/*! ZSTD_compress_usingDict() : - * Compression at an explicit compression level using a Dictionary. - * A dictionary can be any arbitrary data segment (also called a prefix), - * or a buffer with specified information (see dictBuilder/zdict.h). - * Note : This function loads the dictionary, resulting in significant startup delay. - * It's intended for a dictionary used only once. - * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ -ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const void* dict,size_t dictSize, - int compressionLevel); - -/*! ZSTD_decompress_usingDict() : - * Decompression using a known Dictionary. - * Dictionary must be identical to the one used during compression. - * Note : This function loads the dictionary, resulting in significant startup delay. - * It's intended for a dictionary used only once. - * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ -ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const void* dict,size_t dictSize); - - -/*********************************** - * Bulk processing dictionary API - **********************************/ -typedef struct ZSTD_CDict_s ZSTD_CDict; - -/*! ZSTD_createCDict() : - * When compressing multiple messages / blocks using the same dictionary, it's recommended to load it only once. - * ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup cost. - * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. - * `dictBuffer` can be released after ZSTD_CDict creation, because its content is copied within CDict. - * Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate `dictBuffer` content. - * Note : A ZSTD_CDict can be created from an empty dictBuffer, but it is inefficient when used to compress small data. */ -ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, - int compressionLevel); - -/*! ZSTD_freeCDict() : - * Function frees memory allocated by ZSTD_createCDict(). */ -ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); - -/*! ZSTD_compress_usingCDict() : - * Compression using a digested Dictionary. - * Recommended when same dictionary is used multiple times. - * Note : compression level is _decided at dictionary creation time_, - * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ -ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const ZSTD_CDict* cdict); - - -typedef struct ZSTD_DDict_s ZSTD_DDict; - -/*! ZSTD_createDDict() : - * Create a digested dictionary, ready to start decompression operation without startup delay. - * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ -ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); - -/*! ZSTD_freeDDict() : - * Function frees memory allocated with ZSTD_createDDict() */ -ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); - -/*! ZSTD_decompress_usingDDict() : - * Decompression using a digested Dictionary. - * Recommended when same dictionary is used multiple times. */ -ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const ZSTD_DDict* ddict); - - -/******************************** - * Dictionary helper functions - *******************************/ - -/*! ZSTD_getDictID_fromDict() : - * Provides the dictID stored within dictionary. - * if @return == 0, the dictionary is not conformant with Zstandard specification. - * It can still be loaded, but as a content-only dictionary. */ -ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); - -/*! ZSTD_getDictID_fromDDict() : - * Provides the dictID of the dictionary loaded into `ddict`. - * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. - * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ -ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); - -/*! ZSTD_getDictID_fromFrame() : - * Provides the dictID required to decompressed the frame stored within `src`. - * If @return == 0, the dictID could not be decoded. - * This could for one of the following reasons : - * - The frame does not require a dictionary to be decoded (most common case). - * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information. - * Note : this use case also happens when using a non-conformant dictionary. - * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). - * - This is not a Zstandard frame. - * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ -ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); - - -/******************************************************************************* - * Advanced dictionary and prefix API - * - * This API allows dictionaries to be used with ZSTD_compress2(), - * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and - * only reset with the context is reset with ZSTD_reset_parameters or - * ZSTD_reset_session_and_parameters. Prefixes are single-use. - ******************************************************************************/ - - -/*! ZSTD_CCtx_loadDictionary() : - * Create an internal CDict from `dict` buffer. - * Decompression will have to use same dictionary. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, - * meaning "return to no-dictionary mode". - * Note 1 : Dictionary is sticky, it will be used for all future compressed frames. - * To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters). - * Note 2 : Loading a dictionary involves building tables. - * It's also a CPU consuming operation, with non-negligible impact on latency. - * Tables are dependent on compression parameters, and for this reason, - * compression parameters can no longer be changed after loading a dictionary. - * Note 3 :`dict` content will be copied internally. - * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. - * In such a case, dictionary buffer must outlive its users. - * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() - * to precisely select how dictionary content must be interpreted. */ -ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); - -/*! ZSTD_CCtx_refCDict() : - * Reference a prepared dictionary, to be used for all next compressed frames. - * Note that compression parameters are enforced from within CDict, - * and supersede any compression parameter previously set within CCtx. - * The parameters ignored are labled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. - * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. - * The dictionary will remain valid for future compressed frames using same CCtx. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Special : Referencing a NULL CDict means "return to no-dictionary mode". - * Note 1 : Currently, only one dictionary can be managed. - * Referencing a new dictionary effectively "discards" any previous one. - * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ -ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); - -/*! ZSTD_CCtx_refPrefix() : - * Reference a prefix (single-usage dictionary) for next compressed frame. - * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). - * Decompression will need same prefix to properly regenerate data. - * Compressing with a prefix is similar in outcome as performing a diff and compressing it, - * but performs much faster, especially during decompression (compression speed is tunable with compression level). - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary - * Note 1 : Prefix buffer is referenced. It **must** outlive compression. - * Its content must remain unmodified during compression. - * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, - * ensure that the window size is large enough to contain the entire source. - * See ZSTD_c_windowLog. - * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. - * It's a CPU consuming operation, with non-negligible impact on latency. - * If there is a need to use the same prefix multiple times, consider loadDictionary instead. - * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dm_rawContent). - * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ -ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, - const void* prefix, size_t prefixSize); - -/*! ZSTD_DCtx_loadDictionary() : - * Create an internal DDict from dict buffer, - * to be used to decompress next frames. - * The dictionary remains valid for all future frames, until explicitly invalidated. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, - * meaning "return to no-dictionary mode". - * Note 1 : Loading a dictionary involves building tables, - * which has a non-negligible impact on CPU usage and latency. - * It's recommended to "load once, use many times", to amortize the cost - * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. - * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. - * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of - * how dictionary content is loaded and interpreted. - */ -ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); - -/*! ZSTD_DCtx_refDDict() : - * Reference a prepared dictionary, to be used to decompress next frames. - * The dictionary remains active for decompression of future frames using same DCtx. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Note 1 : Currently, only one dictionary can be managed. - * Referencing a new dictionary effectively "discards" any previous one. - * Special: referencing a NULL DDict means "return to no-dictionary mode". - * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. - */ -ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); - -/*! ZSTD_DCtx_refPrefix() : - * Reference a prefix (single-usage dictionary) to decompress next frame. - * This is the reverse operation of ZSTD_CCtx_refPrefix(), - * and must use the same prefix as the one used during compression. - * Prefix is **only used once**. Reference is discarded at end of frame. - * End of frame is reached when ZSTD_decompressStream() returns 0. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary - * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. - * Prefix buffer must remain unmodified up to the end of frame, - * reached when ZSTD_decompressStream() returns 0. - * Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent). - * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) - * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. - * A full dictionary is more costly, as it requires building tables. - */ -ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, - const void* prefix, size_t prefixSize); - -/* === Memory management === */ - -/*! ZSTD_sizeof_*() : - * These functions give the _current_ memory usage of selected object. - * Note that object memory usage can evolve (increase or decrease) over time. */ -ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); -ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); -ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); -ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); -ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); -ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); - -#endif /* ZSTD_H_235446 */ - - -/**************************************************************************************** - * ADVANCED AND EXPERIMENTAL FUNCTIONS - **************************************************************************************** - * The definitions in the following section are considered experimental. - * They are provided for advanced scenarios. - * They should never be used with a dynamic library, as prototypes may change in the future. - * Use them only in association with static linking. - * ***************************************************************************************/ - -#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) -#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY - -/**************************************************************************************** - * experimental API (static linking only) - **************************************************************************************** - * The following symbols and constants - * are not planned to join "stable API" status in the near future. - * They can still change in future versions. - * Some of them are planned to remain in the static_only section indefinitely. - * Some of them might be removed in the future (especially when redundant with existing stable functions) - * ***************************************************************************************/ - -#define ZSTD_FRAMEHEADERSIZE_PREFIX 5 /* minimum input size required to query frame header size */ -#define ZSTD_FRAMEHEADERSIZE_MIN 6 -#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ -#define ZSTD_SKIPPABLEHEADERSIZE 8 - -/* compression parameter bounds */ -#define ZSTD_WINDOWLOG_MAX_32 30 -#define ZSTD_WINDOWLOG_MAX_64 31 -#define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) -#define ZSTD_WINDOWLOG_MIN 10 -#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) -#define ZSTD_HASHLOG_MIN 6 -#define ZSTD_CHAINLOG_MAX_32 29 -#define ZSTD_CHAINLOG_MAX_64 30 -#define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) -#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN -#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) -#define ZSTD_SEARCHLOG_MIN 1 -#define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ -#define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ -#define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX -#define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ -#define ZSTD_STRATEGY_MIN ZSTD_fast -#define ZSTD_STRATEGY_MAX ZSTD_btultra2 - - -#define ZSTD_OVERLAPLOG_MIN 0 -#define ZSTD_OVERLAPLOG_MAX 9 - -#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame - * requiring larger than (1<= ZSTD_FRAMEHEADERSIZE_PREFIX. - * @return : size of the Frame Header, - * or an error code (if srcSize is too small) */ -ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); - - -/*************************************** -* Memory management -***************************************/ - -/*! ZSTD_estimate*() : - * These functions make it possible to estimate memory usage - * of a future {D,C}Ctx, before its creation. - * ZSTD_estimateCCtxSize() will provide a budget large enough for any compression level up to selected one. - * It will also consider src size to be arbitrarily "large", which is worst case. - * If srcSize is known to always be small, ZSTD_estimateCCtxSize_usingCParams() can provide a tighter estimation. - * ZSTD_estimateCCtxSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. - * ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. - * Note : CCtx size estimation is only correct for single-threaded compression. */ -ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel); -ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); -ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); -ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void); - -/*! ZSTD_estimateCStreamSize() : - * ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one. - * It will also consider src size to be arbitrarily "large", which is worst case. - * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. - * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. - * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. - * Note : CStream size estimation is only correct for single-threaded compression. - * ZSTD_DStream memory budget depends on window Size. - * This information can be passed manually, using ZSTD_estimateDStreamSize, - * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); - * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), - * an internal ?Dict will be created, which additional size is not estimated here. - * In this case, get total size by adding ZSTD_estimate?DictSize */ -ZSTDLIB_API size_t ZSTD_estimateCStreamSize(int compressionLevel); -ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); -ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); -ZSTDLIB_API size_t ZSTD_estimateDStreamSize(size_t windowSize); -ZSTDLIB_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); - -/*! ZSTD_estimate?DictSize() : - * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). - * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). - * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. - */ -ZSTDLIB_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); -ZSTDLIB_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); -ZSTDLIB_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); - -/*! ZSTD_initStatic*() : - * Initialize an object using a pre-allocated fixed-size buffer. - * workspace: The memory area to emplace the object into. - * Provided pointer *must be 8-bytes aligned*. - * Buffer must outlive object. - * workspaceSize: Use ZSTD_estimate*Size() to determine - * how large workspace must be to support target scenario. - * @return : pointer to object (same address as workspace, just different type), - * or NULL if error (size too small, incorrect alignment, etc.) - * Note : zstd will never resize nor malloc() when using a static buffer. - * If the object requires more memory than available, - * zstd will just error out (typically ZSTD_error_memory_allocation). - * Note 2 : there is no corresponding "free" function. - * Since workspace is allocated externally, it must be freed externally too. - * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level - * into its associated cParams. - * Limitation 1 : currently not compatible with internal dictionary creation, triggered by - * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). - * Limitation 2 : static cctx currently not compatible with multi-threading. - * Limitation 3 : static dctx is incompatible with legacy support. - */ -ZSTDLIB_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); -ZSTDLIB_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticCCtx() */ - -ZSTDLIB_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); -ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticDCtx() */ - -ZSTDLIB_API const ZSTD_CDict* ZSTD_initStaticCDict( - void* workspace, size_t workspaceSize, - const void* dict, size_t dictSize, - ZSTD_dictLoadMethod_e dictLoadMethod, - ZSTD_dictContentType_e dictContentType, - ZSTD_compressionParameters cParams); - -ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict( - void* workspace, size_t workspaceSize, - const void* dict, size_t dictSize, - ZSTD_dictLoadMethod_e dictLoadMethod, - ZSTD_dictContentType_e dictContentType); - - -/*! Custom memory allocation : - * These prototypes make it possible to pass your own allocation/free functions. - * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. - * All allocation/free operations will be completed using these custom variants instead of regular ones. - */ -typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); -typedef void (*ZSTD_freeFunction) (void* opaque, void* address); -typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; -static ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /**< this constant defers to stdlib's functions */ - -ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); -ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); -ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); -ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); - -ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, - ZSTD_dictLoadMethod_e dictLoadMethod, - ZSTD_dictContentType_e dictContentType, - ZSTD_compressionParameters cParams, - ZSTD_customMem customMem); - -ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(const void* dict, size_t dictSize, - ZSTD_dictLoadMethod_e dictLoadMethod, - ZSTD_dictContentType_e dictContentType, - ZSTD_customMem customMem); - - - -/*************************************** -* Advanced compression functions -***************************************/ - -/*! ZSTD_createCDict_byReference() : - * Create a digested dictionary for compression - * Dictionary content is just referenced, not duplicated. - * As a consequence, `dictBuffer` **must** outlive CDict, - * and its content must remain unmodified throughout the lifetime of CDict. */ -ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); - -/*! ZSTD_getCParams() : - * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. - * `estimatedSrcSize` value is optional, select 0 if not known */ -ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); - -/*! ZSTD_getParams() : - * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. - * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ -ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); - -/*! ZSTD_checkCParams() : - * Ensure param values remain within authorized range. - * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ -ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); - -/*! ZSTD_adjustCParams() : - * optimize params for a given `srcSize` and `dictSize`. - * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. - * `dictSize` must be `0` when there is no dictionary. - * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. - * This function never fails (wide contract) */ -ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); - -/*! ZSTD_compress_advanced() : - * Same as ZSTD_compress_usingDict(), with fine-tune control over compression parameters (by structure) */ -ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const void* dict,size_t dictSize, - ZSTD_parameters params); - -/*! ZSTD_compress_usingCDict_advanced() : - * Same as ZSTD_compress_usingCDict(), with fine-tune control over frame parameters */ -ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, - const void* src, size_t srcSize, - const ZSTD_CDict* cdict, - ZSTD_frameParameters fParams); - - -/*! ZSTD_CCtx_loadDictionary_byReference() : - * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. - * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ -ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); - -/*! ZSTD_CCtx_loadDictionary_advanced() : - * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over - * how to load the dictionary (by copy ? by reference ?) - * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ -ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); - -/*! ZSTD_CCtx_refPrefix_advanced() : - * Same as ZSTD_CCtx_refPrefix(), but gives finer control over - * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ -ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); - -/* === experimental parameters === */ -/* these parameters can be used with ZSTD_setParameter() - * they are not guaranteed to remain supported in the future */ - - /* Enables rsyncable mode, - * which makes compressed files more rsync friendly - * by adding periodic synchronization points to the compressed data. - * The target average block size is ZSTD_c_jobSize / 2. - * It's possible to modify the job size to increase or decrease - * the granularity of the synchronization point. - * Once the jobSize is smaller than the window size, - * it will result in compression ratio degradation. - * NOTE 1: rsyncable mode only works when multithreading is enabled. - * NOTE 2: rsyncable performs poorly in combination with long range mode, - * since it will decrease the effectiveness of synchronization points, - * though mileage may vary. - * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. - * If the selected compression level is already running significantly slower, - * the overall speed won't be significantly impacted. - */ - #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 - -/* Select a compression format. - * The value must be of type ZSTD_format_e. - * See ZSTD_format_e enum definition for details */ -#define ZSTD_c_format ZSTD_c_experimentalParam2 - -/* Force back-reference distances to remain < windowSize, - * even when referencing into Dictionary content (default:0) */ -#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 - -/* Controls whether the contents of a CDict - * are used in place, or copied into the working context. - * Accepts values from the ZSTD_dictAttachPref_e enum. - * See the comments on that enum for an explanation of the feature. */ -#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 - -/* Controls how the literals are compressed (default is auto). - * The value must be of type ZSTD_literalCompressionMode_e. - * See ZSTD_literalCompressionMode_t enum definition for details. - */ -#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 - -/*! ZSTD_CCtx_getParameter() : - * Get the requested compression parameter value, selected by enum ZSTD_cParameter, - * and store it into int* value. - * @return : 0, or an error code (which can be tested with ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); - - -/*! ZSTD_CCtx_params : - * Quick howto : - * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure - * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into - * an existing ZSTD_CCtx_params structure. - * This is similar to - * ZSTD_CCtx_setParameter(). - * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to - * an existing CCtx. - * These parameters will be applied to - * all subsequent frames. - * - ZSTD_compressStream2() : Do compression using the CCtx. - * - ZSTD_freeCCtxParams() : Free the memory. - * - * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() - * for static allocation of CCtx for single-threaded compression. - */ -ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); -ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); - -/*! ZSTD_CCtxParams_reset() : - * Reset params to default values. - */ -ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); - -/*! ZSTD_CCtxParams_init() : - * Initializes the compression parameters of cctxParams according to - * compression level. All other parameters are reset to their default values. - */ -ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); - -/*! ZSTD_CCtxParams_init_advanced() : - * Initializes the compression and frame parameters of cctxParams according to - * params. All other parameters are reset to their default values. - */ -ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); - -/*! ZSTD_CCtxParams_setParameter() : - * Similar to ZSTD_CCtx_setParameter. - * Set one compression parameter, selected by enum ZSTD_cParameter. - * Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams(). - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); - -/*! ZSTD_CCtxParams_getParameter() : - * Similar to ZSTD_CCtx_getParameter. - * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. - * @result : 0, or an error code (which can be tested with ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); - -/*! ZSTD_CCtx_setParametersUsingCCtxParams() : - * Apply a set of ZSTD_CCtx_params to the compression context. - * This can be done even after compression is started, - * if nbWorkers==0, this will have no impact until a new compression is started. - * if nbWorkers>=1, new parameters will be picked up at next job, - * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). - */ -ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( - ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); - -/*! ZSTD_compressStream2_simpleArgs() : - * Same as ZSTD_compressStream2(), - * but using only integral types as arguments. - * This variant might be helpful for binders from dynamic languages - * which have troubles handling structures containing memory pointers. - */ -ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs ( - ZSTD_CCtx* cctx, - void* dst, size_t dstCapacity, size_t* dstPos, - const void* src, size_t srcSize, size_t* srcPos, - ZSTD_EndDirective endOp); - - -/*************************************** -* Advanced decompression functions -***************************************/ - -/*! ZSTD_isFrame() : - * Tells if the content of `buffer` starts with a valid Frame Identifier. - * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. - * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. - * Note 3 : Skippable Frame Identifiers are considered valid. */ -ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size); - -/*! ZSTD_createDDict_byReference() : - * Create a digested dictionary, ready to start decompression operation without startup delay. - * Dictionary content is referenced, and therefore stays in dictBuffer. - * It is important that dictBuffer outlives DDict, - * it must remain read accessible throughout the lifetime of DDict */ -ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); - -/*! ZSTD_DCtx_loadDictionary_byReference() : - * Same as ZSTD_DCtx_loadDictionary(), - * but references `dict` content instead of copying it into `dctx`. - * This saves memory if `dict` remains around., - * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ -ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); - -/*! ZSTD_DCtx_loadDictionary_advanced() : - * Same as ZSTD_DCtx_loadDictionary(), - * but gives direct control over - * how to load the dictionary (by copy ? by reference ?) - * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ -ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); - -/*! ZSTD_DCtx_refPrefix_advanced() : - * Same as ZSTD_DCtx_refPrefix(), but gives finer control over - * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ -ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); - -/*! ZSTD_DCtx_setMaxWindowSize() : - * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. - * This protects a decoder context from reserving too much memory for itself (potential attack scenario). - * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. - * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) - * @return : 0, or an error code (which can be tested using ZSTD_isError()). - */ -ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); - -/* ZSTD_d_format - * experimental parameter, - * allowing selection between ZSTD_format_e input compression formats - */ -#define ZSTD_d_format ZSTD_d_experimentalParam1 - -/*! ZSTD_DCtx_setFormat() : - * Instruct the decoder context about what kind of data to decode next. - * This instruction is mandatory to decode data without a fully-formed header, - * such ZSTD_f_zstd1_magicless for example. - * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ -ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); - -/*! ZSTD_decompressStream_simpleArgs() : - * Same as ZSTD_decompressStream(), - * but using only integral types as arguments. - * This can be helpful for binders from dynamic languages - * which have troubles handling structures containing memory pointers. - */ -ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs ( - ZSTD_DCtx* dctx, - void* dst, size_t dstCapacity, size_t* dstPos, - const void* src, size_t srcSize, size_t* srcPos); - - -/******************************************************************** -* Advanced streaming functions -* Warning : most of these functions are now redundant with the Advanced API. -* Once Advanced API reaches "stable" status, -* redundant functions will be deprecated, and then at some point removed. -********************************************************************/ - -/*===== Advanced Streaming compression functions =====*/ -/**! ZSTD_initCStream_srcSize() : - * This function is deprecated, and equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) - * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); - * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); - * - * pledgedSrcSize must be correct. If it is not known at init time, use - * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, - * "0" also disables frame content size field. It may be enabled in the future. - */ -ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize); -/**! ZSTD_initCStream_usingDict() : - * This function is deprecated, and is equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); - * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); - * - * Creates of an internal CDict (incompatible with static CCtx), except if - * dict == NULL or dictSize < 8, in which case no dict is used. - * Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if - * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. - */ -ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel); -/**! ZSTD_initCStream_advanced() : - * This function is deprecated, and is approximately equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_setZstdParams(zcs, params); // Set the zstd params and leave the rest as-is - * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); - * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); - * - * pledgedSrcSize must be correct. If srcSize is not known at init time, use - * value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy. - */ -ZSTDLIB_API size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, const void* dict, size_t dictSize, - ZSTD_parameters params, unsigned long long pledgedSrcSize); -/**! ZSTD_initCStream_usingCDict() : - * This function is deprecated, and equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_refCDict(zcs, cdict); - * - * note : cdict will just be referenced, and must outlive compression session - */ -ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); -/**! ZSTD_initCStream_usingCDict_advanced() : - * This function is deprecated, and is approximately equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_setZstdFrameParams(zcs, fParams); // Set the zstd frame params and leave the rest as-is - * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); - * ZSTD_CCtx_refCDict(zcs, cdict); - * - * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. - * pledgedSrcSize must be correct. If srcSize is not known at init time, use - * value ZSTD_CONTENTSIZE_UNKNOWN. - */ -ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize); - -/*! ZSTD_resetCStream() : - * This function is deprecated, and is equivalent to: - * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); - * - * start a new frame, using same parameters from previous frame. - * This is typically useful to skip dictionary loading stage, since it will re-use it in-place. - * Note that zcs must be init at least once before using ZSTD_resetCStream(). - * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. - * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. - * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, - * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. - * @return : 0, or an error code (which can be tested using ZSTD_isError()) - */ -ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); - - -typedef struct { - unsigned long long ingested; /* nb input bytes read and buffered */ - unsigned long long consumed; /* nb input bytes actually compressed */ - unsigned long long produced; /* nb of compressed bytes generated and buffered */ - unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ - unsigned currentJobID; /* MT only : latest started job nb */ - unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ -} ZSTD_frameProgression; - -/* ZSTD_getFrameProgression() : - * tells how much data has been ingested (read from input) - * consumed (input actually compressed) and produced (output) for current frame. - * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. - * Aggregates progression inside active worker threads. - */ -ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); - -/*! ZSTD_toFlushNow() : - * Tell how many bytes are ready to be flushed immediately. - * Useful for multithreading scenarios (nbWorkers >= 1). - * Probe the oldest active job, defined as oldest job not yet entirely flushed, - * and check its output buffer. - * @return : amount of data stored in oldest job and ready to be flushed immediately. - * if @return == 0, it means either : - * + there is no active job (could be checked with ZSTD_frameProgression()), or - * + oldest job is still actively compressing data, - * but everything it has produced has also been flushed so far, - * therefore flush speed is limited by production speed of oldest job - * irrespective of the speed of concurrent (and newer) jobs. - */ -ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); - - -/*===== Advanced Streaming decompression functions =====*/ -/** - * This function is deprecated, and is equivalent to: - * - * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); - * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); - * - * note: no dictionary will be used if dict == NULL or dictSize < 8 - */ -ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); -/** - * This function is deprecated, and is equivalent to: - * - * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); - * ZSTD_DCtx_refDDict(zds, ddict); - * - * note : ddict is referenced, it must outlive decompression session - */ -ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); -/** - * This function is deprecated, and is equivalent to: - * - * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); - * - * re-use decompression parameters from previous init; saves dictionary loading - */ -ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); - - -/********************************************************************* -* Buffer-less and synchronous inner streaming functions -* -* This is an advanced API, giving full control over buffer management, for users which need direct control over memory. -* But it's also a complex one, with several restrictions, documented below. -* Prefer normal streaming API for an easier experience. -********************************************************************* */ - -/** - Buffer-less streaming compression (synchronous mode) - - A ZSTD_CCtx object is required to track streaming operations. - Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. - ZSTD_CCtx object can be re-used multiple times within successive compression operations. - - Start by initializing a context. - Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression, - or ZSTD_compressBegin_advanced(), for finer parameter control. - It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx() - - Then, consume your input using ZSTD_compressContinue(). - There are some important considerations to keep in mind when using this advanced function : - - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. - - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. - - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. - Worst case evaluation is provided by ZSTD_compressBound(). - ZSTD_compressContinue() doesn't guarantee recover after a failed compression. - - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). - It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) - - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. - In which case, it will "discard" the relevant memory section from its history. - - Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. - It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. - Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. - - `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. -*/ - -/*===== Buffer-less streaming compression functions =====*/ -ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); -ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); -ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ -ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ -ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ -ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ - -ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); - - -/*- - Buffer-less streaming decompression (synchronous mode) - - A ZSTD_DCtx object is required to track streaming operations. - Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. - A ZSTD_DCtx object can be re-used multiple times. - - First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). - Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. - Data fragment must be large enough to ensure successful decoding. - `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. - @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. - >0 : `srcSize` is too small, please provide at least @result bytes on next attempt. - errorCode, which can be tested using ZSTD_isError(). - - It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, - such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). - Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. - As a consequence, check that values remain within valid application range. - For example, do not allocate memory blindly, check that `windowSize` is within expectation. - Each application can set its own limits, depending on local restrictions. - For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. - - ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. - ZSTD_decompressContinue() is very sensitive to contiguity, - if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, - or that previous contiguous segment is large enough to properly handle maximum back-reference distance. - There are multiple ways to guarantee this condition. - - The most memory efficient way is to use a round buffer of sufficient size. - Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), - which can @return an error code if required value is too large for current system (in 32-bits mode). - In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, - up to the moment there is not enough room left in the buffer to guarantee decoding another full block, - which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. - At which point, decoding can resume from the beginning of the buffer. - Note that already decoded data stored in the buffer should be flushed before being overwritten. - - There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. - - Finally, if you control the compression process, you can also ignore all buffer size rules, - as long as the encoder and decoder progress in "lock-step", - aka use exactly the same buffer sizes, break contiguity at the same place, etc. - - Once buffers are setup, start decompression, with ZSTD_decompressBegin(). - If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). - - Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. - ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). - ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. - - @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). - It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. - It can also be an error code, which can be tested with ZSTD_isError(). - - A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. - Context can then be reset to start a new decompression. - - Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). - This information is not required to properly decode a frame. - - == Special case : skippable frames == - - Skippable frames allow integration of user-defined data into a flow of concatenated frames. - Skippable frames will be ignored (skipped) by decompressor. - The format of skippable frames is as follows : - a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F - b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits - c) Frame Content - any content (User Data) of length equal to Frame Size - For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. - For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. -*/ - -/*===== Buffer-less streaming decompression functions =====*/ -typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; -typedef struct { - unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ - unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ - unsigned blockSizeMax; - ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ - unsigned headerSize; - unsigned dictID; - unsigned checksumFlag; -} ZSTD_frameHeader; - -/** ZSTD_getFrameHeader() : - * decode Frame Header, or requires larger `srcSize`. - * @return : 0, `zfhPtr` is correctly filled, - * >0, `srcSize` is too small, value is wanted `srcSize` amount, - * or an error code, which can be tested using ZSTD_isError() */ -ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /**< doesn't consume input */ -/*! ZSTD_getFrameHeader_advanced() : - * same as ZSTD_getFrameHeader(), - * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ -ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); -ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ - -ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); -ZSTDLIB_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); -ZSTDLIB_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); - -ZSTDLIB_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); -ZSTDLIB_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); - -/* misc */ -ZSTDLIB_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); -typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; -ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); - - - - -/* ============================ */ -/** Block level API */ -/* ============================ */ - -/*! - Block functions produce and decode raw zstd blocks, without frame metadata. - Frame metadata cost is typically ~18 bytes, which can be non-negligible for very small blocks (< 100 bytes). - User will have to take in charge required information to regenerate data, such as compressed and content sizes. - - A few rules to respect : - - Compressing and decompressing require a context structure - + Use ZSTD_createCCtx() and ZSTD_createDCtx() - - It is necessary to init context before starting - + compression : any ZSTD_compressBegin*() variant, including with dictionary - + decompression : any ZSTD_decompressBegin*() variant, including with dictionary - + copyCCtx() and copyDCtx() can be used too - - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB - + If input is larger than a block size, it's necessary to split input data into multiple blocks - + For inputs larger than a single block, really consider using regular ZSTD_compress() instead. - Frame metadata is not that costly, and quickly becomes negligible as source size grows larger. - - When a block is considered not compressible enough, ZSTD_compressBlock() result will be zero. - In which case, nothing is produced into `dst` ! - + User must test for such outcome and deal directly with uncompressed data - + ZSTD_decompressBlock() doesn't accept uncompressed data as input !!! - + In case of multiple successive blocks, should some of them be uncompressed, - decoder must be informed of their existence in order to follow proper history. - Use ZSTD_insertBlock() for such a case. -*/ - -/*===== Raw zstd block functions =====*/ -ZSTDLIB_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); -ZSTDLIB_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ - - -#endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ - -#if defined (__cplusplus) -} -#endif -- cgit v1.2.3-54-g00ecf